Search:

Nope. Just google '65nm P45' and it's all over the place. Here's a good example:

http://www.anandtech.com/cpuchipsets/intel/showdoc.aspx?i=3325

There is no 45nm NB chipset that I'm aware of. ...

I'm pretty sure the NB is 65nm.

P45 - 65nm

P35/X38/X48 - 90nm

Yes. It's going to be hard to get stable there, though. I would just use large-fft for now since you're pushing the FSB/RAM system so hard. It'll fail faster (or at the same time) if there is a...

That is a low VID. Are you sure it's not the min-VID? Use RealTemp-->Settings to display the max-VID and min-VID.

I'd love to see this as well. I just don't think it's possible. I haven't seen 500FSB w/ a 45nm quad that passed enough tests that I would call it 24/7 stable.

There is a wall around 475-485FSB....

I haven't changed any settings, and it shows up as 1Gb. I'm only using 1 NIC (the other is disabled), and I'm hooked into a Gb router.

I've never seen it drop to 100Mb b/c of lack of need and...

Really?

I'd think the Internet connection would bottleneck it. I mean it shouldn't matter how fast you can talk to the router if the router can only talk to the web via 10Mb/s.

And...

Just experiment. It's only 1 setting. Just try from -100mv to +100mv and see what works best. That's what I did. Those formulas are OK to get started, but can be overly confusing and lead you...

1:1 isn't a good ratio on P45. PL has to be set too high.

I think you'll need DI or LN2 for that speed, and it wouldn't be 24/7 in any case. All these high FSB speeds you're seeing are not 24/7 stable. I haven't done a lot of duallie super-high FSB 24/7...

The MIIF does fine w/ quads, and for 24/7 you aren't going to get much higher clocks from a dual than a quad (4.2-4.4GHz vs 4.0-4.2GHz). So, ~200Mhz higher w/ the duals, but half the cores.

If...

Can't you just lower the PL on MIIF directly? I would assume that having the options separate would be more advantageous.

Or is it that the Phase Pull-Ins on the X38 allowed you to run a lower PL...

I spent 4 weeks trying to get 490 stable. I can bench at 500, but there is no 24/7 stability. I gave up, and am running it at 471 now. I know I can go higher, but pushing the FSB to the ragged...

Were you around when the G0 65nm hit? All of the sudden Q6600's hit 3.6GHz easily instead of 3.1-3.2GHz (on the B3's), and temps were much lower. I didn't hear anybody screaming for Intel to...

Is that P95 large-fft stable? I had to play w/ NB GTL to get any kind of stability in large-fft above 465FSB.

I'm running 1.256v on the NB. This was almost good at 480FSB at this voltage (went over 12hrs large-fft, but then got an error), but I've since dialed it down to 471 b/c I was tired of messing w/ it...

With all mobos getting high FSB is much easier w/ dual-cores. MIIF will easily get 500FSB w/ a wolfie.

Getting 500FSB w/ a quad is what is difficult on any mobo.


You cannot compare FSB...

No, but you don't want to use them anymore. Write down your settings, and after you change the BIOS do a clear CMOS and then re-enter all your settings manually. Then save over your old profile(s).

It makes a huge difference. 500FSB w/ a duallie is easy on almost any board. 500FSB on a quad is a completely different beast.

:eek:


Do you have a link? That would be awesome!

You aren't going to get far at all w/ everything on auto. Go back a few pages and look for a guide by Simps. It should help you get started.

450 is easy. 470-480 stable will take a little bit...

Try Simps guide a few pages back. If you have only tried 2 GTL combos you have barely scratched the surface. I've been testing for about 3 weeks now, and have tried at least 150 different...

That is interesting, but even if ICH10 is somehow restricted on X58, it is still a heck of a lot faster than any secondary on-board RAID controller I've ever seen.

Take your 2 raptors and put them on the 'speeding HDD' in RAID0. Wait...you already did:

http://www.xtremesystems.org/forums/showpost.php?p=3402786&postcount=1672


OK, now take those same 2...

Yeah, the quad will help tremendously in '06. Not so much in most games.

Here's a run I did last year w/ a Q9550, P35, and a volt-modded 8800GTS-512...all on air.
...