Search:

done ;)

would be great to get a updated bsod list for HASWELL added on the main first post....

Wasnt sure what thread to place it in lol :D

Here is another furmark bench with 920/1375 on both cards with a power control of 13% to stop the cards throttling when overclocked with vsync disabled...

Here is another furmark bench with 920/1375 on both cards with a power control of 13% to stop the cards throttling when overclocked with vsync disabled

as you can see cards are completely stable...

added picture with SUPERPI scores ;)

http://img641.imageshack.us/img641/3749/2000ddr378721t1.png

8M and 16M tests run aswell.

I must have something quite great here though i was told from quite a few xtremesystem members that my ICs are high speed binned Elphia bbse Ic`s i removed the heat spreader from 1 of the sticks and...

Dram Voltage : 1.640v *.01v from default*
CPU 1.343v
QPI/VTT/DRAM/UNCORE voltage : 1.43v

I have a really great kit of memory here trust me they wont even flake out at over 1100mhz with 8.8.8.24...

You could try upping your QPI/DRAM/CPU VTT voltage up to 1.4.
to get mine running at there settings and sweet timings i need 1.43v QPI Uncore Voltage..

http://img232.imageshack.us/img232/3749/2000ddr378721t1.png

mine are not to shabby either ;)

BBSE 2000 OCZ Blades c9s :)

Misc Information :

QPI/DRAM : 1.43v * i have read and done extensive searches on this and if you have memory that your wanting to run at very tight timings @2000 with T1 your going to need lots of...

Impossible VERY impossible even if i set it to those settings the system will boot up with 1600 memory if i blast the VTT up to around 1.38v then the memory after a reboot will be shown at 2000mhz...

run some new tests and i have a 24/7 stable setting of

1600 @ 6.7.6.16.4.4.4.4.59 @1.590v

Fully stable.

I have a question though my motherboard seems to have a weak very weak uncore maxing...

hehe

ok now you missed one of my posts above :D

bbse whats the max volts you can run though it
and whats the max 24/7 volts

dont want to burn them out when looking for faster clocks :D...

Those pictures are from the 2133 stuff.

I took the risk and ripped off the sink from my ocz blades 2000 cl9
and to my surprise i seem to have this stuff lol

ELPIDA J1108BBSE
DJF
0904R95YB00

D9KPT whats the highest voltage you can run through them without burning them up ?
BBSE whats the highest voltage you can run though them without burning them up to ?

and with the memory maxed...

So much conflicting information lol i have given up wanting to know whats on em lol they cant be hypers cause i cant get 6.6.6.18 @800

ahh well lol thought i had a good bin special set but if the...

hmmm is D9KPT better than BBSE ?

Ok i wont remove the sink.
wish i could find a thread on these forums from people that has this same memory i have with there overclocks and advanced timeings info as i know nothing about the...

Is it worth the risk in removing one of the sticks heat spreaders it looks very easy to do with the blades as they have 2 screws on the back and thats it
i dont think it will void the warantee as no...

Im thinking we have the same Ic`s :P ohhh yeah :D

Just did another test bumping the bclk to 222x20 4.21ghz
then i jumped right in at 888mhz *1776*mhz @ 7.7.6.18 T1 1.560v

works great :D

http://img832.imageshack.us/img832/2757/77618.png

Just tested the voltage.

did 2 loops of test 4 and 6 and 7 no errors. @ 1.550v 1.554v bios reading

1.500v no boot
1.520v only 2x sticks detected. 3rd Awol lol
1.530v All detected, errors in...

ohh one other Q guys.

here is the full listing of the timings im using

6.7.6.18.5.12.5.5.59

Does anyone know if the timings are correct for performance as some of those extended timings have...

Cant do 6-6-6 at all system wont boot though 6.7.6.18 T1 boots perfectly @1.60v
also the sticks where bought over 1 year ago use black pcb i think its a black brainpower pcb..

Im going to lower...

I think i have some great stuff but i need some uber memory buffs to help me tweak further.

Current Settings are memory set to 1600 6.7.6.18 T1 @1.60v *undervolted ;)
though between 7.7.7.21 and...