DDR2 fat body D9 list

A more complete list for BT-37E :

D9FJG , D9DQW , D9DNZ , D9CVZ , D9CRZ

http://www.hobid.com/inventory/D/25.html

OPB are you 100% sure that D9DQT are BT-37E ? Why everyone says that they are BT-3 ?

Quote:

---

Originally Posted by Onepagebook

haha, Dawan
I got your D9DQW big brother here;)
1gx2..

http://img49.imageshack.us/img49/893/dscn03862bt.jpg

---

Any results?

does anyone have a rough idea how fatbody D9 will scale with 4-4-4-12 and 5-5-5-12?
Trying to find my motherboard's limits first and lowest ratio is 1:1
I've got max 2.4v to use and so far at 461mhz 4-4-4-12 2.3v but not sure how much further it can go

Quote:

---

Originally Posted by ArcTan

does anyone have a rough idea how fatbody D9 will scale with 4-4-4-12 and 5-5-5-12?
Trying to find my motherboard's limits first and lowest ratio is 1:1
I've got max 2.4v to use and so far at 461mhz 4-4-4-12 2.3v but not sure how much further it can go

---

If it's real fatbody, you could do 4-3-2 or 4-2-2 at those speeds.

Quote:

---

Originally Posted by thunderstruck!

If it's real fatbody, you could do 4-3-2 or 4-2-2 at those speeds.

---

thanks but just want to see how they do with 4-4-412 and 5-5-5-12 to try and max my fsb. pretty sure they're fatbodies as they're 5400UL corsair

Anybody ever heard of 4QB11 D9CHL ?
It sits on pc3200 c3 micron ram...

It's old ram btw, about 8 months old

Quote:

---

Originally Posted by ArcTan

thanks but just want to see how they do with 4-4-412 and 5-5-5-12 to try and max my fsb. pretty sure they're fatbodies as they're 5400UL corsair

---

With 2.4V and D9DQT you can get something like :

950Mhz - 4-3-2-4
960Mhz - 4-4-4-4
1060Mhz- 5-5-5-5

If you have the slower D9DQW :

920Mhz - 4-3-2-4
950Mhz - 4-4-4-4
1000Mhz- 5-5-5-5

These results are from trying more than 20 sticks of D9DQT & D9DQW .

The chips you have in your 5400UL depends on the revision . I don't remember which IC's goes with each revision though .

I wonder what my new RAM has (see sig) I don't want to take the heat spreader off and I guess that's the only way to find out.

Quote:

---

Originally Posted by Stelios

With 2.4V and D9DQT you can get something like :

950Mhz - 4-3-2-4
960Mhz - 4-4-4-4
1060Mhz- 5-5-5-5

If you have the slower D9DQW :

920Mhz - 4-3-2-4
950Mhz - 4-4-4-4
1000Mhz- 5-5-5-5

These results are from trying more than 20 sticks of D9DQT & D9DQW .

The chips you have in your 5400UL depends on the revision . I don't remember which IC's goes with each revision though .

---

mine are v1.2 and look like they scale to about 960 4-4-4-12 at 2.4v so it seems I may have hit my ram limit.

Quote:

---

Originally Posted by ArcTan

mine are v1.2 and look like they scale to about 960 4-4-4-12 at 2.4v so it seems I may have hit my ram limit.

---

960 is not bad . Try with 4-3-2-4 . I get 958Mhz with this setting and its faster . 2.4V again.

Quote:

---

Originally Posted by Stelios

960 is not bad . Try with 4-3-2-4 . I get 958Mhz with this setting and its faster . 2.4V again.

---

thanks
I'll give that a try sometime
still trying to find my motherboard's limits as I'm still using 1:1 ratio

edit: do you know if 5400UL v1.2 are D9DQT or DQW?

Quote:

---

Originally Posted by ArcTan

thanks
I'll give that a try sometime
still trying to find my motherboard's limits as I'm still using 1:1 ratio

edit: do you know if 5400UL v1.2 are D9DQT or DQW?

---

5400UL v1.2 is D9DQW (BT-37E rev. A).

Quote:

---

Originally Posted by The Stilt

5400UL v1.2 is D9DQW (BT-37E rev. A).

---

thanks alot :toast:

Quote:

---

Originally Posted by The Stilt

5400UL v1.2 is D9DQW (BT-37E rev. A).

---

I can't find this memory. Well I've found it, but it's terribly expensive. Am I missing something or will I have to spend a ton to get this?

I found these under my Heatspreaders:

http://pics.pajper.net/patriot-d9-fatbody.jpg

you have 2 mushkin 2x1gb sets listed in here but the model numbers you list don't exist either under extreme performance or high performance. the ddr2-8000 should be the extreme performance redline md#996525 and the ddr2-6400 extreme performance md#996523; at least as far as i can tell. would be great if you could check up on that and confirm if they are d9 chips after all :D. i'll let you know if i find anything. i'm considering buying this mem so yeah. also d9 can do 500mhz+ right?

or if anyone else could verify what chips they are ;)

subscribed...

Complete NOOOOB question here. But I don't have much time to write this so I'll check when I get back home.

Can someone give some "knowledgable" info on why D9 chips are the dogs?

I mean I was getting some G.Skill PC2-6400's, but they have no D9. Does that make them crap or something?

What cip use this memory http://geilusa.com/proddetail.asp?linenumber=71 ,and is dhis memory good?

This is my Crucial Ballistix 2x1GB DDR2 1000 4-4-4-10@2,3v prime95 blende test stable!

They aren't fat body...but they run so pretty;)


http://img188.imageshack.us/img188/6...1000444re4.jpg

Cans omeone tell me if one of this memories uses D9?

2 GB (2 pcs 1GB) DDR2 (800) PC2-6400 Patriot (PDC22G6400LLK)

2 GB (2 pcs 1GB) DDR2 (800) PC2-6400 OCZ Platinum Rev 2 (OCZ2P800R22GK)

Thanks.

Can anyone conform or deny that these Crucial Ballistix PC5400 4x 512MB dimms are or are not fatbodies?

http://gallery.weyland.be/v/Computers/hardware/Crucial/

If you need other pics, please yell :)

Hi.Is it fatbody or else(D9DBV).Any bady says this Ic o.c rate. thanks:idea:

http://img155.imageshack.us/img155/8435/ram1uv3.jpg

No these are simple D9.Fatbodies are not square(bga).I'm pretty sure that they oc fine too..

Hello!Are these [ http://www.supertalent.com/products/...?PN=T1066UX1G5 ] fatbodies? :)