I know I do. I'm just dying to get a new board to really push these things. I need to sell off one my kits for cash. Whichever does worse. Buying 2 gigs of ram broke me.
Printable View
I know I do. I'm just dying to get a new board to really push these things. I need to sell off one my kits for cash. Whichever does worse. Buying 2 gigs of ram broke me.
oj, people usually benefited from burn in
LOL @ letter
Agreeeeeeeed :banana:Quote:
Originally Posted by Playful_Buffalo
All run test5 of oczmemtest at 2-2-2-10.Quote:
Originally Posted by Zeus
10x230 at 3.50vdimm 59195 errors 10passes
10x228 at 3.50vdimm 209 errors 10passes
10x227 at 3.50vdimm 48 errors 10passes
10x226 at 3.50vdimm 4 errors 10passes
10x226 at 3.40vdimm 920 errors 10passes
10x225 at 3.40vdimm 146 errors 10passes
10x224 at 3.40vdimm 0 errors 10passes
9x234 at 3.60vdimm 12.352 errors 10passes
9x232 at 3.60vdimm 1052 errors 10passes
9x230 at 3.60vdimm 0 errors 10passes
8x234 at 3.50vdimm 9603 errors 10passes
8x233 at 3.50vdimm 237 errors 10passes
8x232 at 3.50vdimm 8 errors 10passes
8x231 at 3.50vdimm 0 errors 10passes
Q: what is the best performance setting,is it 10x224,9x230 or 8x231,its now running at 10x224 at 3.40vdimm and prime stable.
Rocker, what is your VCore?
10x224 will smoke your other scores!
Vcore is 1.550/104% so something like +-1.62v.
And what woot be the best setting to burn'in the mem,becaus 10x224 isnt that great hè.
When it just got them the hit 10x250 at 3.40vdimm and 265 at 3.50vdimm,what is the matter with this mem :confused: .
Should be enough....
Could you list:
*ALL your memory timings
*ALL voltage settings
*ALL multis & dividers
*Is you CPU a CO or CG stepping
*What slot is RAM in
The a64 rig is not connected to inet,but i will make sreenshot of a64Tweaker and post it here.
a64 3200+ Newcastle
ADA 3200 AEP4AX
CBAEC 0430 RPMW
1 stick 512mb VX
its running at 1T 10x224 at 2-2-2-10-15-16,mem is in slot 2 at the moment,before it was in slot 1 also in slot 3 and i had the same results.
vcore 1.550v 104%
vdimm 3.40v
chipset 1.6v
No AGP becaus a use a pci TNT2 32mb.
Multies or dividers:its running 1/1 that is the only one am intrested in.
But i am gone try my bh5 to see if the can hit higher,and to see if the board is still ok or not i hit 9x275 with my corsairs on the dfi.
RocKer,
I just remembered!
wait for Conrad to come back online... from his testing he found his NC would not run in SC with VX, but in DC it would run fine.
My CH was fine with either configuration...
OK
But what i dont understand is that this VX stick did run at 9x265 3.5vdimm the first week i got it in the house,and now i can only hit 9x230 :( at 3.6vdimm,i dont understand it anymore.
I can only do SC Rabbi_NZ ;).Quote:
from his testing he found his NC would not run in SC with VX, but in DC it would run fine
How's your PSU?
Maybe your voltages go down too much?
Yo RocKer. Check this out. What motherboard are you using? If you're using an MSI K8N Neo2 Platinum, see what happens if you run dual channel.Quote:
Originally Posted by RocKer
EDIT:
I just noticed your sig states that you're on the DFI 754 board. I'm not sure why you can't get up to 265MHz anymore. When you were at 265MHz, how many loops of Memtest Test #5 did you run? 10 loops usually isn't enough. I run 20 to 30 just to get an idea of what direction I'm heading. When I hit a wall, I'll loop Memtest overnight at my last error-free frequency.
well - this letter is more then funny... :wierd:
M.tec is TwinMOS low-cost brand - there could be every IC underneath... but of course cheepest IC out there (which atm is also Winbond UTT) used and as you can see it can perform as good as the VX
Winbond is not dead... they have a deal with Infineon to use Infineons Technology for the new production - on the other side with this agreement they are not allowed to put Winbond Label on the ICs - afaik...
bump, can someone answer my question in bold?Quote:
Originally Posted by Sgt_Strider
Sucks at 2.8v. It's made for 3.2+, it's rated for 2-3-3 @ 2.8v. It's called Voltage Xtreme dude, 2.8v isn't eXtreme :p:
When it was at 9x265 3.5vdimm it run test5 for +- 2hours with 0 errors,then it folded D2OL for 3day's and 2 nights 24/7,thats 100% cpu-load,if thats not stressed enough i dont know what will:),and to be sure i run +- 2 hours prime ontop of D2OL and that was also rock solid stable.Quote:
Originally Posted by conrad.maranan
Then afther those 3days i reboot to go up with htt and it crasht,i try'd everything i know but it did'nt help,then i reinstalled XP(i thought maybe that help)but it did'nt,i thought maybe its the bios(J&J 4.0v bios)i reflasht the bios with the one with that memtest inside in hope that woot help,but again it was a nono,i had allsorts off troubel with volts on vdimm, then i reflasht it again to the J&J bios and the lines where back ok(checkt with multiemeter),but i was not abel to go up with HTT on whatever vdimm,so now i am running at 10x224 :( at 3.40vdimm,memtest 0 errors and prime stable in XP.
O yes the test where run all at 2-2-2-10 or 2-2-2-5.
My 520w OCZPowerstream works ok.
I still have to try my 2x256mb bh5 to see if the can run as before(the did 9x275 error free :) )did'nt have the time to do it yet,but if i find time today i will try them.
Can you give some info on what to do to burn'in the mem and easy go up with htt,or something becaus i dont know what to do anymore :( ,it was looking so good the first week but sadly it did'nt last.
So now am wondering if the dfi(again) is to blaam or cpu or the memory,i can't try it on an other board becaus i dont have an other s754 board.
I'am now serious begin to consider to quit s754(sell it or make it a D2OL rig) and go over to s939 in DC.
I have got no luck yet with a64 on s754,it was my first one,it was allways something that whent wrong,almost everything is gone in rma,first it was the DFI then cpu then the OCZ 520w,and what is it now ppffff.
@ ryan
so can you say that u use new winbond (of course selected) IC for the VX?
u r absolutely right M.tec can be everything - Winbond, PSC, ...
but new (not the ones out on market atm which are selected PSC) TwinMOS Speed Premium which will be out soon will all come with these new Winbond IC.
Alonso
FAE TwinMOS Germany ;)
Have u done any testing on those? What can we expect?Quote:
Originally Posted by Alonso
:toast:
That is the silliest thing I have heard in a long time. You should arrange to meet him to drop off the loot and we will all jump him and take his clothes. :grr:Quote:
Originally Posted by ryanpgroovy
Speed Premium with WB to come out soon (the ones already out are PSC) - should perform well if the chips are the same as on the M.tec modules we tested and talking about.Quote:
Originally Posted by georgesod
micron g? I've heard ballistix close to this... maybe OCZ just selects them better than crucial?
Off topic...Quote:
You should arrange to meet him to drop off the loot
VERY OFFTOPIC !!! :eek:Quote:
and we will all jump him and take his clothes.
Seriusly though, crucial just selects them better for the reviews not the consumers :D
Perkam
Funny, I have some SuperTalent memory that acts a lot like VX. Hrmmmz I wonder what is under the spreaders.
Couple things I'd like to note though for all you looking for a cheap way to get the same ICs as VX. First as we have seen from the countless TCCD reviews the OCZ/PDP/PQI modules always seem to work better because of the better PCB design. Much the same will come from buying cheap modules with the same ICs. The OCZ VX will just work better due to the better PCB design.
hey...whats going on here?!?!? I NEVER wrote the part in bold...Why is someone changing my posts???Quote:
Originally Posted by hollywood
heres pc ice's vx running on my dfi at 3.6volts
Stable?
not yet, still playing around. I was able to get it to 280 2,2,2,5 but frozen on screen shot
is it possible that vx is tccd 437(week 37 and up)?
^sometimes the week 37+ TCCD's didnt like voltage
in was inconsistent
I have a question. Should I run memtest86 with default #7 test? or I need to run #5 only since lota ppl preferring it?
Thanks in advance
I would clear the #5 first than go #7. If I have time I would run all test but these 2 usually tells me if I am going to hit wall or not.
I left it with #7 for 2 hours(about 8 passes) and no errors, should I move on to #5 now?
Sure sounds good :) After all that is done, I suggest testing it with windows memtest as well. Even the ones that pass memtest 86 have tendency to fail on windows memtest especially on A64,
Yes that's true. At the very first time there were more than 4 errors within 10% but now seems fine with about 2000%
And one thing that is confusing me, why my OCCT CPU toture failed at 250x10 before I went for memtest86 and now it could last for 1 hr + now? is there something to do with the on die memo controller or just about the memory?(I quit the program since I had to order pizza online)
Thanks for getting back to me Jinu117
There seems to be certain break in happening with VX from all reports I've seen. I don't know as i've only had about 1 hours tops on each VX chips I tried yet and more worried about divider atm. You might have to keep testing over time to see where your break in ends :)
Unless your mobo is brand new, I doubt it is mem controller or mobo that makes you able to fly now. Gotta be something with memory itself.
I need to ask you a favor :) Have you tried divider on memory and see if it causes you problem? Thanks in advance. Most of us seems to have problem over 260FSB once divider is set to 166.
Wow, is this stuff discontinued now????
MWave say's so on their site. I hope that's not the case :(
Only place I can find it is NCIX out of Canada for $281 US
Interesting... either Fry's sucked up all inventory dry or the memory batch isn't as good as it used to be to mass produce this. Or RMA rate is too high where it isn't worth selling the product. Think first one is valid if the deal wit Fry's went through.
it would suck if the vx was discontinued, i run my system at 260 and was looking forward to trying out a pair
i dont think it can be discontinued 1 month after its launch....
discontinued i hate this :( last time i decided to buy ocz 3700eb ordered it to a friend coming from usa he cant find 3700eb and get me a 3500eb now vx gone :( hey ocz people can you do rezervation for me at least for ddr booster i missed the vx train lol :D
How you cool the Memor at these voltages ?
Only the HS or a Fan (more) ?
you can just place a fan over the memory modules^^^^
EDIT: here is a thread on the topic
finally someone other than me who bought vx from mwave.Quote:
Originally Posted by pc ice
i havent tested it yet due to extreme shortages of 3500+ processors but i think it will be better post xmas.
I've been eyeballing this memory since the original VX thread was posted, I'd like to see a 2x256 mb kit.... to compare it with my BH-5 :/
Now I just need to get an A64 and I'd be set :D
Extreme shortage of 3500+? Interesting. FYI, there will be 4 coming up for sale (3 winchester and 1 newcastle in few days). used less than 1 hour each :P For winchesters 1 boots no problem with -55c or below, 1 boots fine -55c above, 1 doesn't like -30c below. New castle hasn't arrived yet (monday) but I have feeling I am going all out FX-55 in few days anyway.
Check the FS section on CPU tuesday or wed :)
Gone already......glad I got some ordered from MWave on Wed. It's sitting in the Fedex dist. center, should have it Mon.Quote:
Originally Posted by pc ice
Same thing happened with 3700EB....got some from MWave, and a week later it's gone :lol:
Prolly samsung will come out with another 'good' ones. As for vx, imo ocz already exhausted their chips that passed speed binning. Is this gonna be a trend? Released a batch of high perf. module, discontinued and move on.....
To Jinu117, no I haven't tried memo divider yet but I will do that for you. Last night I ran 288 passes #5 ot 250MHz and there's been 1 error per pass since loop 5x. And later I tried 255MHz and there were 20 error per pass average. So should I go back to 250MHz or stick on 255MHz and see what's gonna happen?
No this is not a new trend...the issue is we pre test ram and not all modules pass the test....we could just realease without pre testing but im sure you would all hate us within a few days.Quote:
Originally Posted by Dumo
So what's going on? Is OCZ pre-testing slower than the demand?
Sorry, I didn't mean to make it sound so harsh, I was just trying to make sure that they weren't discontinued like everybody was saying.
OCZ is teh pone :banana:
It's true I'm not a good english writer, I don't want to be annoying but can you tell me what did you wrote, please... :(Quote:
Originally Posted by Playful_Buffalo
me dont understoodz too XD
LOL, it means OCZ is amazing
its brings back a good feeling when i hear about the burn ins and voltage that i remeber from bh-5, its almost like winbond makes living chips that give you a big kiss when you push them ;)
though it is wierd how differently these react with low and high voltages then previous winbond designs...
i can only hope the increased sales of these IC's would inspire winbond/infineon to make some higher end IC's
VX is some special ram. I have mine running at 260 2-2-2-10-1t with 3.5v Tried up to 3.6v and saw nothing more. Still burning in. Trying for 270x10 as that is the sweet spot on my 3500+.
BTW OPP, nice to see your seal of approval on these. The OCZ guy's deserve it!:toast:
i will try to get vx and booster in a short time if i find a friend returning from usa
I hope you guys can now see why we chargle a little more for our modules. All are pretested, and backed by a lifetime warranty. We also have a growing team of forum whores who are here to look after you guys and answer all your questions...;)
So as you see we pretty much are the most hands on enthusiast based company there is...and we are pushing to bring you even more awesome products and customer service.
More VX is coming...you just need to keep your eyes out for stock as it sells out in mins on every site it is posted on.
yeah, this IS great piece of RAM! and actually, i don't think that $259 is expensive for such great performing sticks. i remember, when i first bought 1GB of Mushkin LvL (almost 2 years ago) i spend $310 on it and it performs far worse than OCZ VX i have here!
ATM, i'm flying @ DDR520 6-2-2-2.0 1T - something i could dream of with 2x512MB Mushkin LvL II.
excellent job on selectioning and pre-testing whatever ICs you guys found ;)
thanx guys,