testing a new cpu, seems to have strong IMC:
trcd 9 again?
http://i.imgur.com/QLl7oeM.png
still have to sort out temps for the above.
quickie aida run, no semblance of 32m stability with this one:p:
http://i.imgur.com/ckmhyUw.png
Printable View
testing a new cpu, seems to have strong IMC:
trcd 9 again?
http://i.imgur.com/QLl7oeM.png
still have to sort out temps for the above.
quickie aida run, no semblance of 32m stability with this one:p:
http://i.imgur.com/ckmhyUw.png
As a newbie of SuperPi 32M, here's my first trial @ 4GHz with my original Samsung DH0-CH9 ram.
Tommi_Vercetti- 7:31:156 - 40x100 - 1333.00MHz - 9-12-12-15-108-1 - ASROCK Z87M-OCF - Samsung Original DH0-CH9 4GB x2/SAMSUNG HCH9 - 2.15v - CPU H2O/RAM AIR
http://i.imgur.com/x1FwmaQ.jpg
http://i.imgur.com/5xXTck3.png
Cheers!
Tommi_Vercetti
good start
damn might have some potential here
http://i.imgur.com/ZqzXXVk.jpg
no wazza, and not nearly tightened out all the way. was just going to play valids and get out of my comfort zone a bit and had some fun. Realized that the spreaders had popped off the outside on both sides. now that they are naked I will throw some better sinks on and try again :) maybe 5m57 hynixxxxx
Got a new chip for my UD5H to build up a new workstation but it looked good so swapped it out to the OCF!!
Early days but it runs like a champ :)
http://i106.photobucket.com/albums/m...87/5m57578.png
Awesome chip C-N:up:
5G/5G uncore with ambient temp.
Beauty!
Thanks mate, I was just very lucky. Silicone never fails to amaze me!!
She's a keeper :)
Small update / pre work run!!!
C-N- 5:57:500 - 49x102 - 1430MHz 9-12-12-16-108-1 - Asrock Z87 OCF/AC - Corsair 2666 C10 2x4GB/Samsung HCH9 - 2.0265v - CPU Water Kuhler 920 / Ram Air
http://i106.photobucket.com/albums/m...8605M57500.png
l0ud_sil3nc3 - 7:23:938 - 39x102.6 - 1504.2 MHz - 11-14-13-24-266-1T - Z87M OCF - Corsair 3000 2x4GB/MFR - 1.85v - air@all
http://i.imgur.com/xGGXw1S.png
l0ud_sil3nc3 - 6:01:859 - 48x104.2 - 1527.8 MHz - 11-14-13-24-266-1T - Z87M OCF - Corsair 3000 2x4GB/MFR - 1.85v - air@all
http://i.imgur.com/cjJhjao.png
RULE- 5:57.922 - 48x104.2 - 1354.1 MHz - 7-11-7-24-74-1 - AsRock Z87 OCF-M - GSkill Pi 2200mhz C7 /PSC - 2.25V - LN2 CPU/Mem
http://imageshack.us/a/img835/4871/v25.PNG
http://img802.imageshack.us/img802/7564/tpyb.jpg
http://img854.imageshack.us/img854/7706/8uut.jpg
http://imageshack.us/a/img829/4599/30q0.jpg
First time memory under LN2, some instability below -90?C, close 5.57.500 but the screen is incorrect.
Try again this week-end.
l0ud_sil3nc3 - 6:01:563 - 48x104.2 - 1527.8 MHz - 11-14-13-24-266-1T - Z87M OCF - Corsair 3000 2x4GB/MFR - 1.85v - air@all
http://i.imgur.com/6sHj89x.png
Guess I need to run mfr again bastage!
maybe this stick (1.65v) and its brother (only does 1767 lmao)
http://i.imgur.com/zOkbq2k.jpg
RULE - 5:57:422 - 48x104.2 - 1355.8 MHz - 7-11-7-24-72-1T - Z87M OCF - G.SKILL PI 2x2GB/PSC - 2.269v - LN2@ALL
http://img826.imageshack.us/img826/7467/snwz.png
http://imageshack.us/a/img843/7210/5ydc.jpg
http://imageshack.us/a/img197/3906/ilvi.JPG
http://imageshack.us/a/img28/3861/6xny.jpg
Very hard to get this with 66% humidity
http://img46.imageshack.us/img46/213...pgaftbeibu.mp4
Enjoy!
usually yes, not this time.
With very wet air there is a lot of condenses, so I tried to cover everything with a lot of blue paper.
Next time a water proof board will be better!
you know it's all because of you, i learned from the best!
Thanks Fabio and come back to bench please!
same cpu from the prior session starting the night off well:
http://i.imgur.com/e8q40wC.png
finally caught myself:)
http://i.imgur.com/o9D9fGz.png
getting closer. . .
l0ud_sil3nc3 - 5:55:672 - 49x102.1 - 1361 MHz - 6-10-6-24-64-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.15V - LN2 @ all
http://i.imgur.com/qsDl4Ls.png
and FAIL:p:
http://i.imgur.com/f4O9PgC.png
sooooo close yet so far will keep going till I run out of juice since I will be out of town for most of the week which means no bench time:(
Really nice Loud,maybe was a 55.4--
Little improvement,should have some ln2 soon,been to long without it
bullant - 7:20.625 - 39x102.61 - 1368.3MHz - 8-12-8-28-82-1 - OCF - GSkill Pis 2x2GB/PSC - 1.935V -CPU-25,Memory AIR
http://s23.postimg.org/c0e58t5kr/iopx2.png
great runs all around :)
John Lam - 5:58.484 - 50x100 - 1400.0MHz - 9-12-12-15-108-1 - OCF - CORSAIR - 1.98V All AIR
i-RAM x 2
Attachment 131216
Attachment 131215
John what boost gave you I-ram? And I see you use Vista style theme from desctop it's new idea for 32m or I miss something//
This is Offical Luna Theme from Microsoft Called "Zune", I ported from WinFLP OS , No TrueType Font used , only 1M memory used.
http://en.wikipedia.org/wiki/Windows_XP_themes
iRam has very fast transfer rate in 4K , extreme fast access time, doesn't slow down over time , and Unlimited write cycles compared to SSD if you always do Copy Wazza file.
Crusty - 7:17:891 - 40x100.6 - 1334MHz 7-9-6-20-62-1 - Asrock Z87 OCF - Skillz 2133C8 2x2GB/BBSE - 1.91v - CPU SS / Ram LN2
http://imageshack.us/a/img546/9697/bxec.jpg
New os new manual bat-style wazza :D
previus run with slightly slacker timings,the big difference is because of ocx tweaker,no affinity-priority... almost 1 sec slower...
http://imageshack.us/a/img13/8205/pd67.jpg
and some pics of the session
http://imageshack.us/a/img22/2655/89d7.jpg
the reason i did not test 5g at all...next time...
http://imageshack.us/a/img153/9347/euxh.jpg
and some psc sticks to test... hopefully something good will come out
http://imageshack.us/a/img22/2558/tt5e.jpg
Crusty want to see 5GHz time, will show us it )