You got F6e on TT forum.Quote:
Originally Posted by C-N
Printable View
You got F6e on TT forum.Quote:
Originally Posted by C-N
Thanks Nick, I'm sure I read that somewhere but just wanted to check as I intend to get one when they show up in the UKQuote:
Originally Posted by nickshih
Yes thanks mate but for some reason I cant get my RAM to run stable @ 2800 & like for like timings at 2666 were much slower in 32M with it so gave up & went back to F5.... :shrug:Quote:
Originally Posted by stasio
Got my new Gigabyte OC and retail chip few days ago, am really impressed with this new platform,should be going cold soon.Should see some strong memory clocks from this board
Anyone else having a really really hard time with BBSE on Z87X-OC? Got like two or three 32m to pass at 1250 8-10-7 but it's really unstable and stupid, most of the time struggles to even boot.
My cpu needs LOTS of VCCIO volts for 2GB Dram modules(PSC and BBSE) like 1.25 to make 2400 32M and 1.375 to even boot 2600,check those and system agent
Quote:
Originally Posted by Alex-Ro
time to change OCF :shocked:
that's a lot of vccio... have you isolated the problem to these voltages alex?
Negative,the thing is i can boot samsungs 2400 9-11-11 fine at 1.1VCCIO.Psc need 1.25 for 2400 regardless 9-11-9 or 7-11-7.I tried even 9-11-11 and VERY loose tertiary,same story.Other cpu's needed less,this one has weak cache and IMC :shakes:
let's hope nick,the better the boards the better for us :yepp:
Nick: when is it showing up on retail?Quote:
Originally Posted by nickshih
Quote:
Originally Posted by maxxx
as i know .. it already shipped to Newegg from factory
Should be in stock soon...
Nick: oh okie. How about in Asia? Hehehe. :D
We have ready stock here in Malaysia since last week according to my regular reseller.Quote:
Originally Posted by maxxx
RM1200+ which is about $400 usd
@owikh84: thanks man. I haven't heard/seen anything here in Singapore yet. Maybe i'll get a friend to buy me one from KL.Quote:
Originally Posted by owikh84
Apologies for the OT folks!
Quote:
Originally Posted by maxxx
hopes i know it .... i am not sales guy .... should be soon !
:shrug:
Nick: no worries. can still wait... :)Quote:
Originally Posted by nickshih
Trying to make hynix fast XD about the best I can do
Splave - 7:25:359 - 33x121 - 1576.5MHz - 12-14-13-25-294-2 - ASRock Z87 OCF-M - Avexir 3000mhz 2x4GB/Single Sided Hynix MFR - 1.65v - air/air
http://i.imgur.com/gGHLXSO.jpg
weak sammies.. no tRDRD @ 4.. no tRCD @ 11 [current bios]
CL3P20 - 7:26.281 - 23x174.04 - 1218.3MHz - 9-12-11-17-106 1T - MSI Xpower - Team Group, 2133LV, HCH9 - 1.94v - air/air
http://www.overclock.net/content/typ.../1000/flags/LL
nachtfalke - 7:23:359 - 40x100 - 1400MHz - 9-12-12-21-108-1T - Asus M6E- 4x4gb TridentX 2666cl10 -samsung HCH9-stock air/cpu 4670k-air
http://i900.photobucket.com/albums/a...psa11e14e6.jpg
F6G Bios uncore now works & the board responds/boots better with bclk adjustment... getting there
Had a quick go with C9 & got into the .2**'s but not scaling well enough for the voltage so give up for now.
C-N- 6:00:563 - 50x100 - 1400MHz 10-12-12-18-120-1 - Gigabyte GA-Z87X-UD5H - Corsair 2666 C10 2x4GB/Samsung HCH9 - 1.65v - CPU Water Kuhler 920 / Ram Air
http://i106.photobucket.com/albums/m...8006M00563.png
Little 4Ghz run,still trying to work everything out ,tertiary s and subs not looking to add this run Memory is on air PSC 1.93v
http://s21.postimg.org/8jhvd5xef/image.png
awesome run Bullant and C-N :)
nachtfalke - 7:21:640 - 40x100 - 1400MHz - 9-12-12-21-108-1T - Asus M6E- 4x4gb TridentX 2666cl10 -samsung HCH9-stock air-1,92v/cpu 4670k-air
http://i900.photobucket.com/albums/a...psac522b76.jpg
http://i900.photobucket.com/albums/a...ps7a96aa4a.jpg
http://i900.photobucket.com/albums/a...pseaab8d73.jpg
l0ud_sil3nc3 - 7:21:031 - 40x100 - 1300MHz - 6-10-6-26-88-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu
http://i.imgur.com/Aw0Iq8h.png
l0ud_sil3nc3 - 5:58:531 - 50x100 - 1300MHz - 6-10-6-26-78-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu
http://i.imgur.com/EX8k7OS.png
it is all in the tertiaries. . .
l0ud_sil3nc3 - 5:57:282 - 50x100 - 1300MHz - 6-10-6-24-78-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu
http://i.imgur.com/2XGRCSr.png
pics:)
http://i.imgur.com/NlzEiAB.jpg
http://i.imgur.com/iCQde8C.jpg
http://i.imgur.com/4zaHZAT.jpg
http://i.imgur.com/ZAdvhrG.jpg
Awesome runs there l0ud, nacht and bullant:up:
Bro don't forget memtweak in your following runs :)Quote:
Originally Posted by bullant
Yeah Splave I will do,tertiary timings were 4-5-4-20-5-4-4-5-5-22-13-11-11-11-2-2 and subs 5-90-11000-19-5-21-4-6,still working them all out,haven't spent alot of time on it but starting to see what helps
very strong pssssc,what kit is that bull?
Hey Alex, they are the Gskill Pi 2000 cl6 kit mate,I didn't test very long but they did boot in @ same timings @ 2800 Mhz too but didn't get a chance to keep testingQuote:
Originally Posted by Alex-Ro
quick update not to be included as I forgot to switch twcl to 6 XD
http://i.imgur.com/AmC7XYU.png
my first submission into the madness
4GHz
ZenEffect - 7:20:734 - 40x100 - 1333.8MHz - 8-11-7-22-90-1 - ASRock Z87 OC Formula - GSkill 2133mhz 2x2GB/BBSE - 1.9v - Air CPU/Mem
http://i48.photobucket.com/albums/f2...ps698e4460.jpg
man i could use a decent memory pot right about now. 7:18's doable for sure
^^MemtweakIt! not fully shown :down:
what would be the fun if you got ALL the settings? there aren't too many on the OCF. ive been on haswell less than 24 hours so that should give you an idea how easy it is to get this kind of score. ive read no guides, and only made 2 slight modifications (ramdisk + maxmem) to my pi os.Quote:
Originally Posted by XBrytanX
here is a hint... there are a lot of 4's and 3 13's and 1 5. that covers all of my 3rds :rolleyes:
pi is fun because its more than just timings... as I will demonstrate in my next post.
I've always admired this thread for being very informative for others ,about comparing different type of RAM sharing /learning from the pros -I'm pretty sure that's why it got so popular ..no hard fillings I just go with the flow
Nice score man
4GHz
ZenEffect - 7:20:641 - 40x100 - 1334.2MHz - 8-11-7-22-90-1 - ASRock Z87 OC Formula - GSkill 2133mhz 2x2GB/BBSE - 1.9v - Air CPU/Mem
http://i74.photobucket.com/albums/i2...ect/720641.jpg
in no way would I call myself pro. the 2666 tight bbse profile helped start as a baseline, then I tuned in from what it could do on ivy, then tuned in more till it was nice. tune in too far, and you lose efficiency on 3 timings. tfaw, twrwrdd, twrwrdr. tfaw is set to 20 by the profile and you should raise it to 26.
i can almost get trfc 89 to pass but it seems a little slower most likely due to bleeding edge instability. mabye if it gets cooler here in socal. ambients are a pain to work with sometimes when you have central air.
tempted to switch to sammys or some psc to see how they fare. all my stuff is all retail. no cherry picks except mabye the memory but that was pure luck of the newegg draw.
Fine-tuned my 5 ghz run a little,should try a new win soon ,benched this since november last year lol
Alex-Ro - 6.01.281 - 50x100 - 1400 - 9-12-12-18-108-1 - Maximus 6 Gene - Corsair platinum 2666C10@1.9V air/air.
Aida64 is a mess on this new platform, copy/read is not a good indicator of memory efficiency,had crap performance with excellent aida numbers and excellent results with crap aida numbers...
http://img14.imageshack.us/img14/4379/53j.png
@ zen
if you want I can send you my Ney Pro (red) for a week or two ,PM meQuote:
man i could use a decent memory pot right about now. 7:18's doable for sure
a week isnt nearly long enough. ive got a the old kpc pot that might work ok with the 2000 8-9-8 corsairs i have hanging out. it would be quite tricky to mod it all out to be a better pot for clamping on gskill heatspreaders.
Awesome run with bbse Zen:up:
Epic bbse
Couldn't get 2830 to run coz the board changes strap or whatever over 106 bclk but managed 2850 with lower bclk 2860 was a no go!! so figured id shoot for 2933 . Don't have adjustment for a few settings shown on memtweakit & most of the timings displayed are one out i.e set 15 in bios get 14 in mt. The other difficult thing is the timing names on mt don't correlate to my giga bios so been fudging stuff up good & proper. Anyway ended up giving 3000 a go with my dominators & they run so looks like I got some tweaking to do :D
1.86v air
http://i106.photobucket.com/albums/m...0006M00688.png
ZenEffect - 7:20:469 - 40x100 - 1334.2MHz - 8-11-7-22-90-1 - ASRock Z87 OC Formula - GSkill 2133mhz 2x2GB/BBSE - 1.9v - Air CPU/Mem
http://i48.photobucket.com/albums/f2...ps49b59bee.jpg
waza harder, tighter 3rds (slightly)
2 is broke, no post. 1 passes but is slower (the 3's).
herp a derp screen shot, ment to hit motherboard tab on 3rd cpuz. aida64 shows though.
Big update.
Dumo - 6:00:234 - 50x100.03 - 1300.4 MHz - 8-11-7-21-88-1T - M6E - Gskill 2133 C8 2x2gb/bbse - 1.9v - SS/air
http://img822.imageshack.us/img822/1131/1ee.png
nice job roy! :toast:
Hey Alvin, good to see you. :wave:
I am working on getting some 5G today
post it up! I will be running some 5ghz (hopefully) tonight. Havnet even tried clocking cpu to 5ghz yet... been busy playing @ 4 (sooo much fun btw)Quote:
Originally Posted by TheGoat Eater
Hey donny dan! good to see you guys. zen, how you been buddy?Quote:
Originally Posted by Don_Dan
I just made a prank phone call to dumo saying I was from intel claiming he was sending back bad chips. lol. Roy call me back brother!
looks like fun fellas! zen hit me up on skype sometime. keep up the good work guys!
Skype would be easy to get a hold of you on if you were ever signed in :p:Quote:
Originally Posted by trans am
*edit*
may be out of 5ghz for a little bit till i can get cpu cold. seems unreachable... could be me noobing it up (most likely) but i cant get my xp to boot
Yeah os handoff is when clocks are applied. What volts you at?
probably not enough. i was walking up and can do 4.9 but no 50. cpu voltage up to 1.5 before i quit. venomous x cant keep up after that without making the fans scream like crazy.
Try 2.2 vccinQuote:
Originally Posted by ZenEffect
is that fine on air?
Yup and that should allow you to lower vcore, unless cpu is just junk.Quote:
Originally Posted by ZenEffect
will give it a shot mabye tomorrow. running 4ghz again
*edit*
score update... almost into the .3's
http://i48.photobucket.com/albums/f2...ps64b305c0.jpg
ZenEffect - 7:20:407 - 40x100 - 1333.8MHz - 8-11-7-22-88-1 - ASRock Z87 OC Formula - GSkill 2133mhz 2x2GB/BBSE - 1.9v - Air CPU/Mem
memory listed as 88 because of this... I was yelling at the screen at from loop 15 to end
http://i48.photobucket.com/albums/f2...psd30fc3ac.jpg
1st world problems all the way :(
http://i48.photobucket.com/albums/f2...ps66dbc218.jpg
ZenEffect - 7:20:391 - 40x100 - 1333.8MHz - 8-11-7-22-86-1 - ASRock Z87 OC Formula - GSkill 2133mhz 2x2GB/BBSE - 1.9v - Air CPU/Mem
going by an old rule that lets me tweak the memory harder. ;)
made a video of the pass. excuse the horrible quality of the camera phone. it was a spur of the moment thing. another dum dum screen shot, didn't show mobo tab again, 2 mems
at least you can see that im on air :)
http://youtu.be/pZhQMYiqdcA
maybe it will get TA motivated to bench
Quote:
Originally Posted by ZenEffect
it is nice run !!! gj ~~ ur bbse is amazing also ...
messing around with BBSE today and discovered a few volts that help clock these bastards up, figured i'd put something up.
both CPU and RAM on air... gotta work subs more and then freezing time :)
i hear bullant is ripping it up on the Gigabyte OC board also, can't wait to see him put something up :up:
dinos22 - 5:59:484 - 49x104.22 - 1355MHz - 8-12-8-22-88-1 - GIGABYTE Z87X-OC - GSkill 2x2GB/BBSE - 1.95v - air/air
http://img607.imageshack.us/img607/3496/iuox.jpg
the sticks did up to 1365MHz 32M on air dfuq. ive never had them past 1300 on z77 but zeneffect's kit was easily doing 1326. i can only imagine how crazy that kit would clock once it's all dialed in.
http://img585.imageshack.us/img585/1231/ks1c.jpg
http://img11.imageshack.us/img11/4870/hxj.jpg
Great dino will try it later.
Wow nice clocks and time and tuning dino,all on air and that tRAS,nice.:up:
Good bbse does tras like that, psc not so much
Go hiwa go!
If anyone needs details hit me up
Neeeed memtweak and aida dinobro. Nice clocking!
found http://download.gigabyte.eu/FileList...87x-oc_f5n.exeQuote:
Originally Posted by dinos22
is it same as f5m?
nice run dino! you said your bbse was bad... looks pretty stellar to me :rofl:
send me your sticks again dude, i wanna do 1400 on air :DQuote:
Originally Posted by ZenEffect
there is normally only one version of a bios so yes.Quote:
Originally Posted by hiwa
you can download all the beta stuff at Tweaktown Gigabyte forum section that stasio is hosting also!
I'll be sending the info to sin0822 that he will put in his guide with some screenshots of bios settings, memtweak timings, GTL volts etc
send me the shirt first! I wanna get wasted and fight a wallaby :DQuote:
Originally Posted by dinos22
j/k.... I don't drink at all... still down for fighting cute animals though.
why don't YOU make the guide. It would be nice to know it came from somebody who knew how to overclock :rofl: (sorry sin... I had to)
don't underestimate sin, he's alright :D
seems you are underestimating wallabies also EEEK :D:D:D
^ ouch!
I fist fight polar bears at the zoo to wake up in the morning bro, marsupials don't skirr me. I punted a drop bear last week... scored 3 points doing it.
didnt have it on the OS, not sure if they can actually install on itQuote:
Originally Posted by Splave
noticed in this thread there are some that have nothing on screen, some only have memtweakit, some have AIDA64, some both, some have no readings on AIDA, some have covered up timings on asrock ram reading thingie
seems a bit all over the show :)
the key to successful 32m benching. .
http://i.imgur.com/2YDuKoL.jpg
gotta love the local grown goodness:yepp:
hello there berries
http://img12.imageshack.us/img12/4881/mlxt.png
Lol,bit of kangaroo meat
sin's OC guide with some of the kangaroo photo bomb screenshots regarding timings, volts etc on the BBSE etc
http://www.xtremesystems.org/forums/...%28OC%29-Guide
Bunnying!
thats one weird looking rabbitQuote:
Originally Posted by dinos22
Splave - 7:21:563 - 40x100 - 1333.4MHz - 8-12-8-28-88-1 - ASRock Z87 OCF-M - Gskill 2000mhz 2x2GB/PSC - 1.945v - All on Error
http://i.imgur.com/oFWpODK.jpg
Yay
how much do you, guys, gain from CW?
3.3-3.75 usually on haswell
something Im working on now ;) getting pretty fast now
http://tinyurl.com/5m55ftw
looking good ;)Quote:
Originally Posted by Splave
Installed new os,tweaked everything i had in sighht,as george would say,opaaaaa :D
Alex-Ro - 5.59.797- 50x100 - 1400.0MHz - 9-12-12-18-108-1 - Asus Maximus VI GENE - Corsair Platinum 2666C10 Samsung HCH-9@1.9V,all air@28 C
http://img541.imageshack.us/img541/6841/rm0.png
Aaaand,special delivery from Mars :eek:
Alex-Ro - 5.59.468- 50x100 - 1400.0MHz - 9-12-12-18-108-1 - Asus Maximus VI GENE - Corsair Platinum 2666C10 Samsung HCH-9@1.9V,all air@28 C
http://img69.imageshack.us/img69/7127/0k2q.png
Next stop,frozen psc and cpu :)
Awesome runs Alex:up:
Lil' bro M6G lookin' good:D
nice alex, looking good there on air, 4 samsung sticks are looking interesting combination
im about where you are splave for psc on air, been doing 4ghz so far as my air chips are being :banana::banana::banana::banana::banana:y for 5ghz uncore,
ive compared 4.8 and 4.9 uncore at 5ghz, 4.9 is very close, maybe 100-200ms slower, but thats not confirmed could just be waza, 4.8 on the other hand is 500-1500ms slower..
id be quite interested in picking your brain on waza pro.
sure msg me
AndreYang- 5:55.984 - 39x128.3 - 1368.3MHz - 6-11-7-25-64-1 - ASUS Maximus VI Extreme- GSkill 2400mhz 2x2GB/PSC - 2.24v - LN2 CPU/Mem
http://iamxtreme.net/andre/5G-M6E.jpg
whoooaaa mister andre..... :D
9 hours is for a good waza run. It kills me, no more again.
Wow!Quote:
AndreYang- 5:55.984 - 39x128.3 - 1368.3MHz - 6-11-7-25-64-1 - ASUS Maximus VI Extreme- GSkill 2400mhz 2x2GB/PSC - 2.24v - LN2 CPU/Mem
9 hours, you beast! seems people do take this thread seriously :)Quote:
Originally Posted by AndreYang
Andre your going to make us work for it!
l0ud_sil3nc3 - 5:57:046 - 50x100 - 1300.5MHz - 6-10-6-24-78-1 - M6E - GSkill 2400 c8 2x2GB/PSC - 2.0v - LN2 @ all
http://i.imgur.com/54rR0TS.png
Can we get a 6.5GHz low clock/slow clock challenge? I think YoungPro and Fredyama wanted this.
:D seems they are the only ones that have a 6.5 32M cpu till now :)
lol youve caught the bug havent you, first you re-binned all your sticks for the right combination, now youve spend 9 hours playing low clock challenge, nice one dudeQuote:
Originally Posted by AndreYang
yeah dude, Fred-san said there is no need for 5ghz, he did his efficiency testing at 6.5 lolQuote:
Originally Posted by Planet
opa, nice one Dr.Dre!
I have been benching all day and it seems no matter what, vdimm can not exceed 2.1v so pretty limited clocks.
OCF is a breeze to bench one you figure out what your cpu likes voltage wise.
l0ud_sil3nc3 - 5:57:563 - 39x128.2 - 1368.4 MHz - 7-11-7-28-88-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.1v - LN2 @ all
http://i.imgur.com/wFo8xf2.png
l0ud_sil3nc3 - 5:56:953 - 50x100 - 1300.7 MHz - 6-10-6-24-68-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.1v - LN2 @ all
http://i.imgur.com/UYZkYf8.png
cpu seems like it could run with less at 5Ghz, but a healthy dose of vcore is never a bad thing:)
some 4Ghz action, this one is for you Zen;)
l0ud_sil3nc3 - 7:19:344 - 50x100 - 1300.9 MHz - 6-10-6-24-68-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.1v - LN2 @ all
http://i.imgur.com/AgWUEUF.png
frozen pics shortly. . .
Quote:
Originally Posted by AndreYang
nice bro . still ur style :up:
Quote:
Originally Posted by l0ud_sil3nc3
wow huge ice ... how much time u bench ?
and also nice result . time to find better psc ....