-
Official ASUS X38 Boards: P5E, P5E3 - Info/BIOS Thread
-
good luck!...hope it turns out to be a winner...that is the direction that i am planning to go!...DDR3
-
How did you get yours so soon OBR? Please share so we can get ours:p:
-
Here in Europe are new boards very soon ... now i have at home - DFI P35 Infinity, Gigabyte X38-DQ6, Asus P5E3 Deluxe ...
-
Nice, cannot wait to see the results. What is the price ?
-
Quote:
Originally Posted by
OBR
Here in Europe are new boards very soon ... now i have at home - DFI P35 Infinity, Gigabyte X38-DQ6, Asus P5E3 Deluxe ...
What about P5E ? I intrested about this mb ... only one right mobo with DDR2.
X38-DQ6 also I have, but no time to test :rolleyes:
Martin
-
What memory are you gonna be using?
-
-
I dont like the layout.....and those heatpipes are getting bigger and bigger, LMAO whack!!!
-
nice thread...
my Asus P5E3 Deluxe is on the way and arrived in two days (thursday) i hope.
-
i got mine today!
i have a problem voltage damper seems to be useless i have 0.05v drop in full with my QX6800 please when you'll have the board check this.
-
I'm also very interested in how well this motherboard does...I currently have Super Talent DDR3 1866 memory, Q6600 (G0) and the Asus P5K3-Deluxe running very well...but if X38 is better overall, I might jump on it.
-
Quote:
Originally Posted by
pinto
i got mine today!
i have a problem voltage damper seems to be useless i have 0.05v drop in full with my QX6800 please when you'll have the board check this.
I had that same exact issue with my P5K-Deluxe...but this P5K3 doesn't...I hope Asus fixes this as vdroop control is very important to enthusiasts...I'm awaiting on an RMA of the DFI P35 Lanparty board and hope it's vdroop control still works well.
-
Today my modules arrives ... Kingston DDR3-1333MHz CL7 ... 2GB kit.
-
I have that memory and I the setting in my sig.
-
-
do you have some vdrop issue?
-
Yes, every board on this planet has this Vdroop issue, Voltage Damper is useless ...
-
Quote:
Originally Posted by
OBR
Yes, every board on this planet has this Vdroop issue, Voltage Damper is useless ...
ouchh
this one is bad
-
ASUS P5E3 Deluxe arrived.
Just Pics. No Bench...
ASUS P5E3 Deluxe
Spoiler:
http://pics.mwirths.de/pics/thumb/DSC_0021_1.JPG
More:
http://www.mwirths.de/p5e3/pics/1024/thumb.html
1024*768
I habe bigger pics (3008*2000) if anyone want.
-
when i had p5k dlx, the droop dampner worked pretty good no less then 0.01v droop
but sata issues made me give it up for the abit, which has worse droop.
you are right though 90% of boards suffer from this to some degree or another
waiting for some more results.
-
Sure would be nice if some etailer stocked these in the States. The waiting is the hardest part......
-
Quote:
Originally Posted by
OBR
Yes, every board on this planet has this Vdroop issue, Voltage Damper is useless ...
P5K Premium with dampner enabled actually over volts by about 5mv under load for me.
-
Quote:
Originally Posted by
OBR
Hi,
can you tell me your board settings for this FSB please?
my P5E3 Deluxe seems to have a problem with high fsb...
test platform
• E6850 @ Air (540 FSB @ P35)
• Asus P5E3 Deluxe Bios 0402
• Cellshock DDR3 1800
• nvidia 6600GT
• IBM 14 GB IDE HDD
• Enermax 400 Watt NT <- maybe the problem?
• Windows XP SP2
9*400; MEM 1:2 runs without a problem prime stable.
But 430 or more the board won´t boot. Multi 6 and 7 tested.
i hope anyone can help me...
-
I had a lot of problems too ... i can to set high FSB ... but after restart PC wont to post ... and says "OC settings was bad, please set it again" ... Press F1 ... blah, blah ... i had similiar problem on some Giga board, BIOS fixed it ... we need to wait for new BIOS, 402 is very immature ...