http://www.tomshardware.com/forum/28...-water-cooling
To save some typing I've supplied a link to my cooling, as I am 4Ryan6 at Toms Hardware, if you have any questions that are not answered for you in the link, I'll be glad to answer them here.
Best to all here! Ryan :)
For anyone that has the slightest interest in a 24/7 peltier based water chilled system, then I would encourage you to read Ryan's work log. I think that not only will you find it a very interesting read, but if you are so inclined, you will find a blueprint to building a fully functioning, and relatively compact system.
Thanks!Quote:
Originally Posted by Reefa_Madness
Hows things with you?
I know this day, Mothers Day, will be tough for you once again as is every day you face without Gracie, I pray for God's Grace to get you through! Ryan
Thanks, Ryan...probably harder on the kids, as the reminders are everywhere they look. It has been 3 years, so while the pain from the loss is still there, perhaps the wound has healed somewhat.
Plus we take comfort in knowing that we will see her again in due time.
Very interesting.
:)
How efficient would a setup like this be? I can't help but think it would use a bunch of electric.
Peltiers are not efficient, and never have been claimed to be so, to the best of my knowledge.Quote:
Originally Posted by madmaxx
It falls more into the category of acceptable use!, for the below ambient cooling trade off.
Both peltiers energized use a constant 400w wall power, at 200w each, that's the equivalent of running 4 100w lights when both are energized because it is a constant power draw, that wattage is a personally solid tested power draw fact, from actual wall outlet readings.
In my beginning of seeking a below ambient cooling solution I was using a 54qt Coleman camping cooler and freezing ice in gallon jugs with a 10 gallon total water volume with the jugs submerged, I was using 2 freezers to freeze the ice, the peltiers dropped my monthly power bill by $50 US dollars, compared to running 2 freezers freezing the ice for the cooler.
http://www.tomshardware.com/forum/27...-water-cooling
So to me the expense is more than acceptable, as my goal was to have the peltiers be able to drop my water temperature in the insulated reservoir down to 10c, and they handle that and beyond, so the electrical expense is absolutely acceptable to me, but however, it may not be to you!
The electrical use is what it is and there's no getting around that, so it's either an acceptable expense or not, it's up to the individual user, but if the setup is duplicated you'll get the same results.
Going below ambient is going to cost an additional added expense anyway you look at it besides the expense for the hardware itself, that has to be taken into consideration from the beginning.
Whether it is extreme, or mildly extreme as what I class this cooling solution, and this particular cooling solution requires electrical power and the hardware cost to achieve it, anything of any useful value will cost you something!
When you consider what it would take in the traditional radiator water cooling realm just to get as close as possible to ambient, then this initial hardware cost to go below ambient is more than logical especially when you take into consideration my 3770K is overclocked to over 5ghz and it has not been delidded!
Check the CPU temperature at the time of the validation.
http://valid.canardpc.com/cache/banner/mkpbvq-5.png
Oh,I know these guys :D
Bong cooler stays sub-ambient all the time. (6-11c in res) :P http://www.overclock.net/t/406256/th...56k-fail/0_100
with just 1 pump.
Ryan's gets cooler, though.
Sup schmuckley?Quote:
Originally Posted by schmuckley
How've you been doing?