Why are the voltages all reported as 1.1v?
Printable View
Why are the voltages all reported as 1.1v?
Wow, another super chip there C-N! lucky you ;)
OCM :up:
2D Benches:
http://hwbot.org/signature.img?iid=5...se&iehack=.jpg
http://hwbot.org/signature.img?iid=5...se&iehack=.jpg
http://hwbot.org/signature.img?iid=5...se&iehack=.jpg
http://hwbot.org/signature.img?iid=5...se&iehack=.jpg
http://hwbot.org/signature.img?iid=5...se&iehack=.jpg
Still have a lot of work ahead of me in Super Pi and timings/subtimings.
OCM :up:
Quote:
Originally Posted by ProStreetCamaro
Sure, ill contribute some to this.
http://i131.photobucket.com/albums/p...s281/gflop.png
Grats on a great chip mate! what you doing with the previous one? :DQuote:
Originally Posted by C-N
Somehow CPU-Z reports qpi/vtt with the UD5, they have it working on the UD7 so not sure why we cant have it fixed!Quote:
Originally Posted by DavidNJ
Ye things are going good atm..... should buy a lottery ticket :DQuote:
Originally Posted by OC Maximus
What vcore you running your 2600 at & have you got internal pll enabled or disabled for your 5.2**GHz runs?
Quote:
Originally Posted by ProStreetCamaro
Lets have a my Gflops are bigger than yours competition!
http://img.photobucket.com/albums/v4...ro/Holycow.jpg
Love the flops guys, I've started putting some results in the 3rd post in of this thread & when I get time I'll sure add a Gflops league table....Quote:
Originally Posted by Hoss331
Thnaks mate, I havent thought about it but as you are asking I'll probably hold onto it for now just to make sure the 2600 breaks in ok then build a new work rig with it.Quote:
Originally Posted by Johnny87au
F6c is out.:D
Mr. Stasio, what is new in F6c?
Any clue?
A new bios f6c, yummy. I will test it out tonight after work.
Fixed AHCI/RAID issue from previous beta F6b.Quote:
Originally Posted by SteveRo
(for all P67 range beta BIOS dated 01/18/11)
Edit:
Also,I managed to flash BIOS with Q-Flash.
Was running 1.4v for most benches but bumped it up to 1.55v and keep it there so I don't have to constantly keep changing vcore since my temps are good.Quote:
Originally Posted by C-N
I'm seeing max of 41c with 1.55v vcore @ full load. :yepp:
OCM :up:
Quote:
Originally Posted by OC Maximus
On water?
Yes.Quote:
Originally Posted by ProStreetCamaro
http://hwbot.org/signature.img?iid=5...se&iehack=.jpg
OCM :up:
I am liking that build, very clean there OC. I currently have two monster liquid systems and my Torture rack which is the shad. I am planning yet another and this time I will be using the new rev2 Moa3 from watercool in Germany. Very nice build quality and I could replace the rad in my truck with this, massive is the word.
wow OCM that is one sweet setup there :shocked:
2600K is rocking.... going to be fun benching this one :D
Cant (fails test 15) & probably wont bother trying again to get it to run 32M
http://i106.photobucket.com/albums/m...600K/57GHz.png
Nice! Looks like you found one. Careful now and lets see some numbers. Awesome job C-N.:cool:
ads CN to my hate list :shocked:
it's probably just heat mate, make the CPU colder and also try bumping vtt a bit and vmem
other thing you can do to reduce temps a bit maybe is run 2 cores only and no HT
Woah, rocking 57x multi... Badass! :DQuote:
Originally Posted by C-N
That is a seriously nice 2600K C-N :up:
Thank you ;) Note the splatter all over my screen. Acetone can be a real b:banana::banana::banana::banana: :)Quote:
Originally Posted by flesheatinvirus
Thanks ;) Got it setup where I can just swap out GPUs thru QDC's or just run the CPU on water. BTW, A/C is sitting 2' away from the radiators blowing full blast. Fans on rads are blowing right on over the board. Everything stays nice and cool to say the least :yepp:Quote:
Originally Posted by dinos22
@ C-N. Your x57 is making me sick to my stomach. :rofl:
I need to get my hands on another chip ASAP.
OCM :up:
whau, this is nice! How about max stability (example with safe 1.4V, I dont believe datasheet and 1.52V is right for aircooled 24/7, Francois told nothing and Im waiting at answer :) )
Just pot luck my friend, careful & me don’t play nice together :DQuote:
Originally Posted by flesheatinvirus
Numbers will come after I have to burnt the chip in & fully understand the voltage ranges it likes. Going to explore 5GHz with 4/8 SP1 first as that’s where I'd like to run 24/7.
LOLQuote:
Originally Posted by dinos22
Could be related but they still looked good to me, I have a single stage somewhere that might see the light of day again if I get carried away.Quote:
Originally Posted by dinos22
Gave it up to 1.2vtt made no difference but didn’t try a tad more vdimm.... maybe it needs it at 5.7GHz but I know the ram is good at this speed & voltage up to 5.3GHz with my 2500K
Saving that one, probably won’t drop cores but I really don’t need HT so will probably leave it off from now on.Quote:
Originally Posted by dinos22
Quote:
Originally Posted by zalbard
Thanks, makes me wonder if x57 really is the limit the SB can run.Quote:
Originally Posted by Sniper
He he... good game aint it!!!!Quote:
Originally Posted by OC Maximus
Have only run LinX, 3D & Pi at 5GHz DDR2133 HT on with SP1 @ 1.39v in bios & it passed so looks good for my 24/7 setting.Quote:
Originally Posted by FlanK3r
I don’t mind what voltage it runs as long as the temps don’t run away. Its running about 75oC full load LinX on air in a 14~16 ambient which im happy with. 5.2GHz needs more voltage I think 1.45 & then she hits 80oC but I haven’t fully tested 5.2 just short 5/10 runs to get the voltages close.
slap it on SS pronto mate :D
http://hwbot.org/signature.img?iid=5...se&iehack=.jpg
Wow bro nice, you using 2x triples? Whats your ambients because at 1.55 your temps are unreal mate! :)