Hey, just wondering if anyone knew what ic these use:
http://www.crucial.com/store/partspe...2KIT12864AA663
Printable View
Hey, just wondering if anyone knew what ic these use:
http://www.crucial.com/store/partspe...2KIT12864AA663
It's definately D9, not sure which exactly, but they are good IC's.Quote:
Originally Posted by kemist
In the 3DGM review, it hit 800Mhz 3-3-3-10 @ 2.4V
In the BCCHardware review, it hit 824Mhz 3-3-3-12 @ 2.35V
The only issue with this ram is the price, ungodly expensive!
D9DQT according to this site
http://forum.lowyat.net/index.php?showtopic=298646
Micron BT-3, B6-3
but again not really sure if crucial put better IC with that aniversary heatspreader
d9gmh, i have a kit ;)
$230 doesn't seem to much
http://www.newegg.com/Product/Produc...82E16820148017
Pyr0,
are this rams capable 1000 @4-4-4-5 2.3/2.4v?
Quote:
Originally Posted by Pyr0
does this kit also have D9GMH?
this kit
4-4-4-8 = 2.3VQuote:
Originally Posted by ocfx
yesQuote:
Originally Posted by khurios2000
I was referring to Crucial's MSRP, but Newegg's price is quite reasonable :)Quote:
Originally Posted by Pyr0
:banana: lucky me, bought a used kit last night for 200 bones :woot:Quote:
Originally Posted by Pyr0
I managed 800 3.3.3.12, but needed 2.4V for it. AFA cosmetics, it's nice to see all modules touching tape, then spreader. They're kinda purty too. :D
http://img.photobucket.com/albums/v2...M/Crucial3.jpg
Yes, they can do 1000Mhz @ those timings.Quote:
Originally Posted by OCFX
D9GMH
http://img504.imageshack.us/img504/9...0046hq6.th.jpg
Newegg no longer has them and ChiefValue is OOS.
Mine won't boot at cas4 but will boot and run stable at 5-4-4-12 DDR2-1000 2.3v even 2.4v didn't give me cas4 and I'm unwilling to go higher so I left well enough alone. Still hella good as it's cheaper than buying any DDR2-800 and hoping to do 1000 with similar timings.
I did also notice newegg removed the listing (they had stock earlier today though) and I just got mine so I must have ordered at the right time.
edit: Maybe my board undervolts and I should try higher than 2.4? I have no mods to it. What do you think? worth it to try 4-4-4-x DDR2-1000?
or just don't touch it? I do have a 60mm fan blowing on them
Try this:Quote:
Originally Posted by Dredd
http://img244.imageshack.us/img244/876/crucialcq5.jpg
So in order: 4-4-4-10-4-35-10-10-10-10 and the other settings exactly the same. I hope this helps.
Set vdimm @ 2.45v and see if you get it going.
Check with I did with a P5B Deluxe WiFi:
http://img296.imageshack.us/img296/4...0fsboq8.th.jpg
Thanks but it won't post even at 2.45v and those settings. But 2.25v (in bios) boots at 5-4-4-8-4-35-10-10-10-10 But as soon as I set cas4 it won't boot at anything past 800Mhz.
Quote:
Originally Posted by Dredd
what bios?
0711Quote:
Originally Posted by Revv23
I know there's a newer revision. DO you think I should get it?
try 4-4-4-12-5-35-4-10-5-13
what are your voltage settings for nb, sb etc.
No go even at 2.45v even 4-6-6-18 is no good *shrug* I've tried NB/Sb/iCH at max volts and it still wouldn't post at cas4 DDR2-1000. I probably have a set that just won't do it :slapass:Quote:
Originally Posted by Pyr0
I'm even running the latest BIOS 804 and no change. Oh well I did manage to boot at 5-4-4-4-4-35-10-10-10-10
edit: Now I got it to boot with 804 bios and 1.7v on the NB and 1.6v on the SB 2.4v on memory (tried this with 711 I think and no go)
DDR2-1000 4-4-4-8-5-35-10-10-10-10 why would I need so much voltage on the NB/SB?
How high can you guys go @ 3?
3-3-3-12 @ DDR2-800 with 2.35v was ok hereQuote:
Originally Posted by Jodiuh
Crucial's Tenth Anniversary modules are not even mentioned on that page...Quote:
Originally Posted by khurios2000
Besides, D9DQT is no longer in production.
They use D9GMH (B6-3) which can be found on my DDR2 RAM List.
They do. The ICs used on Tenth Anniversary DIMMs are handpicked by Crucial.Quote:
but again not really sure if crucial put better IC with that aniversary heatspreader
I maxxed my voltages on the FSb termination, NB, SB, and ICH (running 2.3v on memory) to boot 4-4-4-12-5-35-10-10-10
Gonna run memtest
damn I was just about to order this stuff from newegg and all the sudden they aren't carrying it :( I just I'll go back to the dominator 6400c4 (same IC's) the crucial at the price was a steal.
Unfortunately it's probably limited edition and won't be available again. I think Crucial should consider re-releasing it under a different name as a high performance overclock friendly part. Something similar to the mushkin redline or Dominator series. If they can make sticks that do DDR2-1000 at cas4 and they're rated for 667 that's amazing results. Especially at the price they retailed for (MSRP is $311.99 at crucial.com now)Quote:
Originally Posted by SkyGod
well thats to bad :( I'm kicking myself for not ordering the other night I had them in my cart at the egg, and I figured i would just wait (I haven't yet decided on all the components for my new rig) I thought to myself, if I wait worst thing that will happen is they will get cheaper... no dice :( you snooze you loose, lol
** this is not my day, the egg doesn't have the 6400c4 dominator up anymore either :( they had it up a few weeks ago then took it down, then put it back up earlier this week.