My PC3500Quote:
Originally posted by EmineM
what kingston ram are you using OPP?
I'm going after Hipro5 :)
OPP
Printable View
My PC3500Quote:
Originally posted by EmineM
what kingston ram are you using OPP?
I'm going after Hipro5 :)
OPP
A few more and I beat Hipro :D
I have to turn up some v-core:D
OPP
that's it. me wants one. lol
got a pic of the rig for fun? what's going on with the northbridge?
Looking good, bro. :thumbsup:Quote:
Originally posted by OPPAINTER
A few more and I beat Hipro :D
I have to turn up some v-core:D
OPP
3 more and I've got him:D
OPP
can the shuttle boards do that high of a FSB as well?
that is one sweet overclock
378 1:1?
thx :p:Quote:
Originally posted by MickeyMouse
lol 378 3:2 for 252mhz ddr
or 378 5:3 for 226mhz ddr
I doubt he's at 5:4 301mhz or 1:1 378 ;)
The high FSB is worthless for 3D. You have to lower your LDT the higher you go affecting the 3D performance.
I used 166 divider for the 9 multiplier, 150 for the 8.
OPP
I got my Shuttle AN50R and A64 3200+
FSB355 1:1 from Japan
Although I am sorry, Ocer of Japan does only SuperPI.
http://magnumjp.com/Temp/4_355.png
See this thread.
http://cal930.hp.infoseek.co.jp/index.html ËCALs PC BBS
and this thread.
http://magnumjp.com/BBS_cgi/c-board.cgi
Welcome to the paradise!!!!!!Quote:
Originally posted by Raoh
I got my Shuttle AN50R and A64 3200+
FSB355 1:1 from Japan
Although I am sorry, Ocer of Japan does only SuperPI.
http://magnumjp.com/Temp/4_355.png
See this thread.
http://cal930.hp.infoseek.co.jp/index.html ËCALs PC BBS
and this thread.
http://magnumjp.com/BBS_cgi/c-board.cgi
http://magnumjp.com/
Hi ! cpulloverclock
http://magnumjp.com/Temp/FSB400MAX.png
Hi Raoh!
Are you using a shuttle AN50R?
LDT @what? 1x?
which voltage?
What memories have you used?
however, it's a superb score! :thumbsup:
byez :cool:
Hi ! Burner Man
shuttle AN50R
LDT@Auto X2.0
Twinmos Winbond BH-5 0247WD Vddr 3.70V
Hello higher clock lovers!
Raoh , I and our friends are just enjoying higher FSB itself:D
Hi cpulloverclock, thanks for checking my site
http://www.oohashi.jp/
And I'm a beta-tester of CPU-Z, so I received CPU-Z 1.20b
from Franck directly. It's AMD64 capable:)
I also love 3DMarks, but now I'm busy at baking Super-PI(E);)
Oh, Burner Man, just a moment for K8N-Pro Vmod details:)
Hi, ok I understandQuote:
Originally posted by kyosen
Hello higher clock lovers!
Raoh , I and our friends are just enjoying higher FSB itself:D
Hi cpulloverclock, thanks for checking my site
http://www.oohashi.jp/
And I'm a beta-tester of CPU-Z, so I received CPU-Z 1.20b
from Franck directly. It's AMD64 capable:)
I also love 3DMarks, but now I'm busy at baking Super-PI(E);)
Oh, Burner Man, just a moment for K8N-Pro Vmod details:)
U can try a Sandra mem bench at 355 1:1 for example with the best timings?
thx
400FSB?Quote:
Originally posted by Raoh
Hi ! Burner Man
shuttle AN50R
LDT@Auto X2.0
Twinmos Winbond BH-5 0247WD Vddr 3.70V
i was readin' the manual on the shuttle
it says max FSB is 250?...
n are there any clear pictures on doin' a voltmodd on cpu n ram.
also where do i get the veriable risister at?
Soon ... they ... will arrive ...
Dont understand ?? I'll tell ya!
I've just ordered 2GB Mushkin Level2 with BH-5 Chips !! :D
To for me, and to for my dad.
Sweet :)
Why doesn't they produce ram with BH-5 chips anymore ??
finaly my A64 rig is up and running :) :)
but i cant run CL2.. i can do it on low speed but not with 226fsb 1:1.. i think maybe i need some more volt.. :)
300 1:1 is incredible pc ice. how much vdimm did that take?
OMG that is just sick pc ice :drool:
With what Vdimm and Vchipset is that done ....
LDT @ 1x i asume :D
hey...SmokeyTheBandit
how mutch volt do you fead your BH5 ? I have a problem to run Cas2 on my sticks.. it can be voltage ?
i give them 2.88v on 440mhz on 2.5-2-2-5 now. must go down to 420mhz to get cas2 ..
orac, my bh-5 mems can do 260 1:1 2-2-2-5 on all board i'v tested, exept on k8n, if I use 1:1 only do 220 cas2 but if i use mems set to 166 (5/3 i think) i can do 320 or more at cas2 (ddr510 2-2-2-5)
maybe a problem with k8n, 1:1 and cas2 :)
regards
verry nice scores. I'm gonna wait for the NF3 250.