OBR,
please show us your new results since we all need to decide if we should buy one of those E8x00 or not!
greets
junkY
Printable View
OBR,
please show us your new results since we all need to decide if we should buy one of those E8x00 or not!
greets
junkY
Here is my Wolfy :D
http://img81.imageshack.us/img81/9137/wolfy4050ul4.jpg
This clock at this voltage looks very good :)Quote:
Originally Posted by icywater
Is this max or why don't you clock your wolfdale higher?
Is that clock also orthos stable? Please tell us more about your hardware!
My Mboard is ancientQuote:
Originally Posted by oc_junkY
P5B-D bios 1226
Nocture HSK
2gb Ballistix tracer pc6400
Currently orthos on 4350 Mhz 1.43v.
Could you post a coretemp pic plz?
on air?Quote:
Originally Posted by icywater
Retail or ES chip?
sorry don't have coretemp, post later.Quote:
Originally Posted by deadlock7
Retail, The store i went too only have 2 E8400, and They are both on hold.Quote:
Originally Posted by jas420221
Great! P965 really can still take on these babies. :D
Quote:
Originally Posted by deadlock7
Can you please post coretemp, 43°c on Air can't be right @ 4Ghz...Quote:
Originally Posted by icywater
My E8400 is running at 58°c @ 3.6Ghz.
Wow that is a very hot chip, what cooling are you using? I get ~58-62°C @ 4ghz on a quad 45nm on air!Quote:
Originally Posted by BassKozz
Updated Sig...Quote:
Originally Posted by antari
See "Everyday Rig".
I am currently running E8400 @ 400mhz External CLock | 9x Multi | 1.2725V
mine is 3hrs prime stable. 50-56 load temps. set to 1.35 in bios, 1.29 underload in cpu-z. aircooled thermalright ultra 120
http://i84.photobucket.com/albums/k2.../4kruninfo.jpg
My E8400 was purchased a few days before official release and it's Orthos stable well over 10 hours at 1.33v idle and 1.30v full load. It passes every benchmark I've thrown at it. I can post screens if needed but it would be tomorrow before I can post them if you want to see Orthos run more than 8 hours.Quote:
Originally Posted by OBR
I think either your setup was off or you had some really bad samples.
It doesn't take much to make a Super_pi run, it won't be Orthos stable at that voltage, I guarantee it. You're going to have to go up at least .05v for Orthos stable.Quote:
Originally Posted by icywater
Here is mine ;
http://img208.imageshack.us/img208/4567/4100tk9.th.jpg
What are your temps/voltages?Quote:
Originally Posted by vera