Because nothing change between Ivy & Haswell ( Temperatures ) just put your Ihs mod and results
http://www.firegoon.com/u/fe5mny.jpg
http://www.firegoon.com/u/bwdsth.jpg
Printable View
Because nothing change between Ivy & Haswell ( Temperatures ) just put your Ihs mod and results
http://www.firegoon.com/u/fe5mny.jpg
http://www.firegoon.com/u/bwdsth.jpg
Hersounds, I knew you would be the first to slice off that IHS :)
Intel really went over board with the Paste and Black Silicone. Can't wait to see the new figures once you've cleaned that crap off and applied your latest Phobya Solution :D.
One small thing meaning to ask the line of very small transistors/caps which appear to the left of the first picture (on the CPU) are they important or can you scrape a few off?
So I guess the clamp and hammer method would work on Haswell too lol
M6E
Socket retention bracket to protect and hold down your nekid haswell
http://img571.imageshack.us/img571/9...enshota005.jpg
@ Hersounds...I'm pretty sure it will be included, but I haven't see the retail board yet.
without IHS+ liquid pro combination woo expecting some good results.
Not really!,this is from a friend on facebook mine...
http://www.firegoon.com/u/f8xyz.jpg
as you see he need 1.16 vcore, and temps are not very well as all...with 3770k same speed need 1.12 vcore ( 3226B068 batch) and temps are more lower.
What cooler?
3770k with antec 620 dual fan...4770k similar stuff i don't remember right now
you should expect good results on temps but i dont dig that u wherent stable at 5Ghz or u cant boot and after delid YES u can, that was tried before on IVY and ur temps will be better yes at 30C less using liquid pro even me im stable at SAME volts after delid on IVY
u can see here
http://www.xtremesystems.org/forums/...results/page29
Ppl at Overclock.net are talking painting the exposed metal next to the die with nail polish or mx-4 or gasket sealant prior to Liquid Metal as Liquid Metal is conductive.
if you go mx4 temps will drop 9C if you go liquid ultra u get 30C !!! u can put some silicone over the parts to protect that will do the job ;)
this one NOT the others
http://www.selectelectricidad.com/pu...aticrx_enl.jpg
Cheers have fun !
Sergio
Use nail polish for that… It's far thiner and will protect the contacts, moreover if want to remove just throw some acetone at it and wipe it clean.
Do you guys use Coollaboratory Liquid Metal or Phobya? (the film or the paste)?
:)
Gotta admit that my urge to upgrade from i5-750 got the better of me, 4760k on the way... darn it.
Great to see some delidding action on the Haswell!
Did you have a chance to test your own yet Hersounds?
Anxious to see some Haswell delid results. :)