I'm looking for a kit for a new x79 build. I want something that scales well with voltage. Is this the kit I'm looking for? (Elite 1866 9-9-9-27)
Or is there something better.
Printable View
I'm looking for a kit for a new x79 build. I want something that scales well with voltage. Is this the kit I'm looking for? (Elite 1866 9-9-9-27)
Or is there something better.
Yes, noticed there's currently no stock for the 1866 Ballistix at the ebay places I'm able to buy.
Wish I had bought 2 kits when the price was good.
the samsung rock on X79 check OC nubs results
for P67 patriots 2000 9-11-9-27 they do @ 2133 9-11-9-27 1T on 16GB 1,65V easy
or Mushkins Redline Ridgeback HS 2133 9-10-11-27 1,65V
crucials im about to test 16GB, but FedericoUY tested on MIVE and seem to run awesome
cheers !
Sergio
I lend my kit (that couldn't run at 2133/9-9-9 on my P8P67 Pro + 2600K) to a friend and he could do 2133/9-9-9 on his AMD FX easily.
What did I miss? :(
I could do 2133/9-11-9-27 with Mushkin 996997 at 1.60v
Hi, can you show a MemTweakIt screen to check some secondary and other timings (@2133 if you can boot 9-9-9 or at the speed you can boot them)? Maybe your board sets a value that's too low or wrong. Please do it and I'll compare with my values. Cheers.
EDIT: btw I thought I had a stable config same as yours ( 2133/9-11-9-27 @ 1.6v with Mushkins '996997', but had to bump them to 1.65v to get memtest stable ;) )
Wish someone would try the 8gb sticks. Same specs as the 4gb...
Yeah I know Im not gonna be the first to try either :lol:. Im holding off on getting these until someone trys the 8gb sticks though...
Crucial finally got the 1866 set in stock yesterday, and got my kit overnighted to me. Have an 8120 and Sabertooth now to try them out in.
Im up to 2200Mhz 9-9-9-27-2T with 1.6Vdimm so far.
2000Mhz 8-8-8-24-2T and 2200Mhz 9-9-9-27-2t 1.65V stable.
Attachment 124316Attachment 124315Attachment 124317Attachment 124318
They are performing flawless on AMD systems. Congratuations Cecil, nice speeds there. Enjoy!.
@Cecil
2200 CL9-9-9 out of 8GB sticks is about as good as it can get... Any chance of running say, 2133 1T?
4.6 GHz at 1.36v is really impressive too, most chips need around 1.4v
Do you mean 8GB dimms, or 8GB kits? I saw Crucial also has 8GB dimms, but I dont have those.
I havent done any 1T testing, as the higher OC you get from 2T always ends up faster.
Im stable up to 4650Mhz 1.356V under load. Havent been able to get 4.7 to pass though. Too much voltage (1.4V) will result in a complete crash as soon as Prime starts. 1.38V will run prime a few passes before cores start dropping out. And 1.362V will run prime for a little while before dropping cores. 1.356V BSODs from not enough voltage. CPU/NB doesnt seem to help either.
I meant 8GB kit, my bad.
As far as your stability on the 8120 goes it probably comes down to cooling. Without water people seem to hit a heat wall and drop cores pretty quick.
You need a considerable OC imo to make 2T faster. Most DDR3 of course can run 1T as far as you want so that's why I asked. I know this kit seems to struggle with 1T at higher frequencies...
I have an H100 for cooling, and at 4600 Im at 59C load CPU temp, not core temp. I thought about throwing together a real loop, but the money and hassle isnt worth the 100-200Mhz daily.
Ill give 1T a try. Before when I tested, I always found no or little difference between 1T and 2T or even 3T on the boards that had it.
Only thing Ive been able to do so far is test down to 1.6375V instead of 1.65V at 2200 9-9-9 stable. Also on a side note, got my CPU/NB down to 1.25v so far. Vcore wouldnt go under 1.35V for 4.6 though.
2340Mhz 9-9-9 (not stable)
Attachment 124370
2000Mhz 8-8-8 is 1t usable, and is faster then any speed I got with 9-9-9. Also, tRC at 47 (stable SPD rating) was faster then tRC at 40 (mobo's auto setting).
2000Mhz 8-8-8-24-1t tRC 47
Attachment 124373
2000Mhz 8-8-8-24-2t tRC 47
Attachment 124374
2000Mhz 8-8-8-24-1t tRC 40
Attachment 124371
Since i couldn't find a second kit anywhere similar to the one i have i decided to upgrade the memory to something totally different .
Ordered 4x4gb of these 1.5v crucial ballistics today .
Once I get them they will have to take it up against my 2x2gb kingston hyperx @ 1600mhz cas6 1.9V .
All this on thuban and CHIV formula .
http://www.skybed.be/temp/memory/kingston_cas6.jpg
I was able to get a heatspreader off and make a picture of the chips :
http://www.skybed.be/temp/memory/Ballistix_1.jpg
http://www.skybed.be/temp/memory/Ballistix_2.jpg
http://www.skybed.be/temp/memory/Ballistix_3.jpg
http://www.skybed.be/temp/memory/Ballistix_4.jpg