Quote:
Originally Posted by Micutzu
Thanks a lot ;)
Printable View
Quote:
Originally Posted by Micutzu
Thanks a lot ;)
i have some mushkin pc3200 lv2 black old bh-5 i could throw in and dump for you wwwww if you need me to.
Let us have it, dump and post here.
Great... more happy ocers :D verry pretty. keep on goin to repair all the ram ;)
But dont fool youre ram and keep the honour to yourself so dont drop other spd's in youre mem where it aint build from!
Part number is a bit wrong. I checked it and timings were 2.5-3-3 that are not typical for any GOLD series.Quote:
Originally Posted by Micutzu
Can someone attach SPD for OCZ EL 400MHz Gold (NOT VX!)?
OCZ4001024ELDCGE-K
Anyone got a dumpfile of Mushkin BH-6 512MB?
sorry hope no one got that dump forgot i pulled my vx and put my tccd in.
Here is some more dumps(i will make twinmos dumps soon also)
Edit: added KHX3200 256mb and Twinmos pc3200
Waus mod: can you put all files in first page(it will make it easyer for evry one later).
Waus-mod if this will work on my redline one half dead and one dead you deserve an OSCAR..
Hey guys,
this is most likely a conflict between cpuz and clockgen. As far as I understand from what you reported, both programs are configuring the smbus in an different way. Therefore, when updating with clockgen, there is a chance that the actual write is made on the SPD. I'm still not 100% sure about what could really happen, but I'll work on adding a fix right now.
Sorry for the inconvenience, it's a chance you noticed the problem.
Franck
I will have some Mushkin pc3500 lvl 2 within a week; if need be I can post a dump then.
Question: do you think this technique will work for TCCD as well? In particular, I am referring to the problems many users experience in not being able to run CAS 2.5 after some time, which I have heard is SPD related. This would make a lot more users happy!
Great find.
:toast: cpuz
Frenchy are not a lot present here :D
lol hot swap kills both stick and your moboQuote:
Originally Posted by Ratax
dont do that
try different mobo, until you find one that can boot it
or try some special spd programmer as i mentioned earlier
Waus-mod: Hmm i stil not get all of this if i have uses 4x 512 and want to write the new spd for only dimm1 how can i do that?(Left hex, and right hex do i dont understand)
here is my dump of corsair 3200ll ver1.1 BH5 256MB stick
Lastviking,
Just look on the tutorial on the first page. As described you get in your dead stick, then load the dump and then the full rewrite function. then gets the spd reloaded and your mem is back alive :)
Hmm does not that write it to all sticks?, hmm one more thing i got one of my muskin to have 2-2-2-6 timings and pc3200 speed instead of pc3700 and i cant make it back to orginal with the saved dump from the muskin stick..wierd i think this program got some bugs. All my sticks was alive before and stil is it but i wanted to se if i could make the muskins sticks run with twinmos sticks.Quote:
Originally Posted by Waus-mod
Yes there are SPD programming devices like this:
http://www.memorytesters.com/ramcheck/rcplus.jpg
But they are expensive and not often used. Most RAM manufacturers offer lifetime warranty, so why bother.
on mine redline it's does'nt work at all they are the same as before i tryed:(
Did they died in a dothan setup? if you follow correctly it will work, if the spd is damaged.
Wow i have the same problem with my CPUZ showing FFF and that i have 2gb mem instead of 512mb
Could some one post a Dump for Corsair PC-3500XMS BH-5 rev 1.1
Not sure if you 512MB or 256MB but here are both:Quote:
Originally Posted by neoman
thx a lot m8 :)
Well after that my CPUZ is showing that i have CMX512-3200LL :O
But i have PC-3500 hmm
no not on a dothan setup, it was on my fx rig but i have to try i out it could have workedQuote:
Originally Posted by Waus-mod
Have got Dump Files for:Quote:
Anyone got a dumpfile of Mushkin BH-6 512MB?
Mushkin Special 2-2-2 DDR400 512MB BH-6
Infineon 6-A DDR333 256MB BH-6
Infineon 6-A DDR333 512MB BH-6 Link will follow soon.