im using the latest bios from the asus site 0701, reckon 0075 (where do i find that) would help my problems?Quote:
Originally Posted by LardArse
Printable View
im using the latest bios from the asus site 0701, reckon 0075 (where do i find that) would help my problems?Quote:
Originally Posted by LardArse
ok, so i'll install that when i get home, that 1.85v profile, is that for running 1.85vDIMM?
thats fairly high isnt it? im running stock cooling on my trident x with a fan pointed at them.
could i load the trident x profile, lower the vDIMM to something more acceptable, and then test from there?
Try first with 2X4GB and in bios set ram's XMP change to 2600 (with all mem. settings on auto) see if it boot to windows.Quote:
Originally Posted by AVulgarPicture
ok, then if it does, i should try the trident x preset for clocking it up to 2600+ (im using the 2400 C10 tridents, not the 2600's)
What I'm trying to say is...if you wanna oc your 2400 to 2600 and to check if your cpu's imc can go the distance.Quote:
Originally Posted by AVulgarPicture
I'm not sure about trdntX preset, haven't test it yet
at the moment i was trying to get my 2400 tridents to post at stock freq/timings
gonna have to try XMP settings, then maybe the new bios when i get home.
is the 0075 bios newer or older than the 0701?
thanks for your help anyway dumo. appreciated.
075 is the newest biosQuote:
Originally Posted by AVulgarPicture
Here u can find all Infos you need.
http://kingpincooling.com/forum/showthread.php?t=1659
There are single sided and double sided 2400er DIMMs out there. SuicidePhoenix' Rams are double sided, whereas some german testers had single sided ones which seem to be worse...
That's wrong, 03xx is always Samsung, 02xx is Hynix.Quote:
Originally Posted by plane501
Yeah, the first batches seem to be double-sided Hynix, and the current ones are all single-sided Samsung.Quote:
Originally Posted by @rne
mine are single sided, 0340.
Yep AVulgarPicture, yours are samsung / single sided.
Will only buy a confirmed double sided kit hynix. Otherwise it seems to be not worth the money. I think there is no argument to buy them atm.
you really think they're that bad? :-/
Hynix kit is doing better than Samsung?Quote:
Originally Posted by @rne
Given the results of some guys in a german forum who can not reach 2600 with samsung (i know his imc is capable of), I will wait a little longer to see more results...
that explainsQuote:
Originally Posted by AVulgarPicture
0701 wont work right with those single sided 4GB, TRFC needs to loosen, you can manually set 300+ or flash to 0075
New serial,black PCB.....(claim is Samsung chips)
http://i1.aijaa.com/b/00746/10148895.jpg
http://forums.vr-zone.com/hardware-d...l10-2x4gb.html
Anybody make pic of chips?
Loaded up to 0075, all my troubles gone now.Quote:
Originally Posted by LardArse
So what other threads are there on these samsungs so I can see what they're capable of? :)
Mine are 0340, single sidedQuote:
Originally Posted by theix
What can yours do, Viss? Similar to SuicidePhoenix runs?
you prolly wont be able to go high on frequency due to single sided density per chipQuote:
Originally Posted by AVulgarPicture
so hang around 2550'ish and go as tight as possible with dram voltage you are comfortable with
1.80v 2550 you can sorta tighten to:
http://www.freeimagehosting.net/t/d8cmp.jpg
http://www.freeimagehosting.net/t/mwehp.jpg
ok for benching 32m
yeh, confirmed i cant get them to run 2600. even at 1.8v
single sided confirmed the suck :(
Oh no....I pray for good chips...I preordered it 3 weeks ago...2x 4GB 2400 MHz chips, hope I will be lucky :-/...
aint that bad at all, cl9, trcd 10 does low tras, tight third timings, just about close to 200mhz over rated timingsQuote:
Originally Posted by AVulgarPicture
my pis are doing 2600+ at 9-12-9. :(