Holy sh*t! :slobber:
And I thought I was crazy :)
Printable View
Holy sh*t! :slobber:
And I thought I was crazy :)
Damn! Someone's making a BIG comeback! :D
What temps are you getting under load....
macci is going to make OPP and FUGGER look like kids playing in the backyard soon Im afraid...lol
macci did you consider making a 3 stage cascade ? Your 2nd cascade with your SC12 compressor as the 3rd stage with i dunno, R14 ?
I think it was with the older one thats on the GPU. The newer should preform even better;)Quote:
Originally posted by MickeyMouse
I saw -88c or lower with a 4.4+ P4 somehwhere looping 2k1 ;)
macci: Do you now have the EE to play with?
heres my first run with new machine from hell.
please note the calibration sticker on my meter.
thats cool macci, you cut the side off a revco chest. awsome setup! im gunna have to send a pic of that to earl (director of tech service revco) they'll get a kick outa that.
was it a pain to saw it off? cause it looks goog like that. where did you put the heat exchanger?
Awesome temps Captain :D
Jason, I've got 350FSB so far (RAM 263) :DQuote:
I still think a A64 alone with a 310-320mhz fsb 5:4 divider with a 3ghz+ speed even tho SC ddr would come really fkn close to 30k
CC, some nice temps there sir :)
what stuff you using there?
the heatexchanger is on the left in the piccy (you can see some PU-insulation there)
Macci, that is a amazing sight. I bet all the stuff required for that cost quite a bit but its like the system of everyones dreams so who cares :D
Jason, yea 350fsb was with K8N -nonpro mobo...but it was only when GF4 was plugged in. With XT I haven't gone higher than 270 3d stable.
With the K8N Pro things seem to work a bit better (it seems to be clock to clock faster than the non pro too). So far I've ran full 3dmark loop at 311FSB with XT in it :)
totally non modded mobo still. but it took a while to find somewhat working bios settings.
something like 305 6:5 ram with 9.5x multi should do nicely if I can do it 3dstable :)
the A64 would run superpi 1M at 2920MHz so far with spreader on.
That's a very good temp from CC , -110C next ? :)
Macci, that is a great setup, how is
1) the video card doing with the cascade on compared to before?
2) can you give us a clue to what sort of scores you are getting for 3dmark2001 whilst you continue to fine tune ?
3) Do you cool that beer down whilst benching with your rig ?
Wer're not going to see an AMD64 beating up FX51/P4 EE's are we ?
:eek:
Regards
Andy
Macci!
lol...what more can i say?
A giant among midgets...
C
Good questions. Macci, let us know. :)Quote:
Originally posted by zakelwe
Macci, that is a great setup, how is
1) the video card doing with the cascade on compared to before?
2) can you give us a clue to what sort of scores you are getting for 3dmark2001 whilst you continue to fine tune ?
3) Do you cool that beer down whilst benching with your rig ?
Did you rent out a studio or something? 4 compressors, a CRT monitor, and a heavily overclocked computer would overload a circuit in any home.
Most homes in USA have 10A 110Vac power circuits, what are they in Europe, mainly Finland?
over here its 3x 32A (Poland) @ 240V
230V, usually at 10A. But in our house we also have some 6A and 16A. Depends on your needs.
Making some changes again Rev 12 incomming
17 years later :-)
Hay Macci hows the weather in Finland:D Cold I bet:D
I just want to get in touch with everybody,, else here's a flash from the past.
See attached
https://www.google.com/search?rlz=1C...w=1536&bih=782
Any updates?
I have the Auto ready, wiring it into its new location this week.
-156c
Wiring done.
I am making a clam shell for MSDT and HEDT sockets, getting ready for long duration runs.