got a sample here too
XEY PSC 2133 7-10-7 kit, will test them soon
Printable View
got a sample here too
XEY PSC 2133 7-10-7 kit, will test them soon
2300MHz 7-10-7-27-1T
http://i458.photobucket.com/albums/q...2600K/108a.jpg
nice job owikh84
can i say good memories need good cpu ?
1,05 VCCIO did 107BCLk on normal aircooling
+2270 memories 7-10-7- 1,69 mm not bad for 100euro kit
Attachment 119301
looks very nice guys :up:
currently oos in US, even memoryc... good 24/7 ram? it's ok to run this kit 1.7v 24/7?
saw 2133 8-9-8 in stock now in memory3C go with them if u want fly
As my CPU is very mediocre at this run on air board and mems had to do the work- the hint of Hiwa is very good, with a little bit of luck you will get a very good kit with the 2133 C8- this is the weaker of my two kits for a little low clock testing on Gene-Z which I just sold, one day later I had to RMA my UD5:rofl: so I´m powned by fate :D
http://www.abload.de/thumb/4ghzgene1...ill32mg8ku.jpg
You see the voltages on the screen, VCCIO and VCCSA are coupled at Z68 Gene, 1,10 is VCCIO, leave VCCSA at 0,925 ca., PLL is 1,775V, in my opinion V below 1,8 is good for decent results, the ram voltage is right, 1,66
P.S. I think max bclk depends as much on the board as on cpu, it is the combination, same cpu only did 107,4 on UD5 P67
yes they are all in one :D a lot of them can do +2000 6-8-6 too
Yes, and some OCZ 2133 Blade can do that too, even on P55 :D - but these are no longer available as far as I know :p:- so go and buy the Ripjaws before I do :rofl:
http://www.abload.de/thumb/10026-8-6...loadcpgpeq.jpg
Yep, too bad my cpu max. @ 106 BCLK because this ram still can go higher:)
http://img809.imageshack.us/img809/2...enshot089o.jpg
cool screen for 2133 8.9.8 memories dumo they are very nice BBSE ICs
here is another test with 2133 7.10.7 kit with XEY PSC
2200 7.10.7 1.55
Attachment 119325
Attachment 119328
WTH one more time gskill and nice PSC for daily use
1920 8-8-8-24-1t 1.60 ????????
Attachment 119329
i am gonna test CL7 tight tRCD now :D
is that normally indicative of 7-10 binned PSC or did you just get really good ones?
1.58v @ 2200MHz give you alot of head room right? or does it not scale with voltage?
it's sample but 100% retail IC and black PCB
they are not handpick try yours
tRCD is right setted 8 in bios and they are PSC not BBSE
the 2133 8.9.8 are BBSE ot hyper
all other memories with high tRCD 10 or 11 are PSC @ high freq
i can't believe this
RipjawsX 2133 7-10-7 can do
first i try 7-8-7 1.60 ok it's done
Attachment 119330
then i tried 6-8-6 huhuh
Attachment 119331
:eek: geesus.. you sure you don't have hyper?
Those are some godly PSC..
With those volts, i've never seen psc get to tRCD 8 with cas 6 above 1600mhz
pretty sure they are XEY PSC ICs
Guys plz test ur memories at Cl6 and 7 with tight tRCD and let us know.
checked again
http://img51.imageshack.us/img51/3543/img1329qd.jpg