Today's Numbers: Get 'Em While They're Hot!

Printable View

Show 100 post(s) from this thread on one page

03-26-2008, 07:08 PM
Movieman

Quote:

Originally Posted by SiGfever

Daily numbers.
or
Today's Numbers.

How's that?:p:
03-26-2008, 07:09 PM
sierra_bound

Quote:

Originally Posted by Movieman

Why not..It's just a title..Suggestions??

I'm not sure why we switched from the other thread. But it seems silly to have a thread saying "Easynews goes down" when they haven't gone down all week.
03-26-2008, 07:12 PM
Movieman

Quote:

Originally Posted by sierra_bound

I'm not sure why we switched from the other thread. But it seems silly to have a thread saying "Easynews goes down" when they haven't gone down all week.

Fair enough. I only argue over the important things.
Thread titles don't matter to me..It's changed.;)
03-26-2008, 07:46 PM
Grafton

well i can say my new quad is doing its work, after getting it installed and fixing the resource share to run wcg 70% of the time i have more than quadrupled my previous daily output :D
used to do ~300 avg daily now its @ ~1400 (boinc points)
03-26-2008, 09:31 PM
[XC] junglemaster

Quote:

Originally Posted by Grafton

well i can say my new quad is doing its work, after getting it installed and fixing the resource share to run wcg 70% of the time i have more than quadrupled my previous daily output :D
used to do ~300 avg daily now its @ ~1400 (boinc points)

Great work!!! Does not always take much to increase the fun :up:
03-27-2008, 06:28 PM
[XC] junglemaster

Crazy!!!! :clap:

XtremeSystems 5,290,224

Only a minor 10k behind our friends :yepp:

I have 2 more Quads to put online tomorrow afternoon...so in 2 days time, we will be further in front :D
03-27-2008, 06:44 PM
cajer

We would have done it if i did not have to send in my memory to crucial for rma. :(
03-27-2008, 07:03 PM
Gamekiller

I'll have a quad up soon. So hopefully it helps!
I'll have a total of 8 cores on my mini-farm. :D
03-27-2008, 07:12 PM
64dragon

i've been keeping my system on over night instead of shutting it off, for a lil over a month now i've been getting projects that take longer and my points/projects seems to have gone down a lot and i need to crunch 24/7 to keep up with what i was doing 15/7.
03-27-2008, 07:17 PM
[XC] serlv

Damn! Only 10K away? Bahhh.
Still, I'm mighty happy with us being over 5 mill most days. Very strong, very nice!

I'm expecting a quad arriving tomorrow. Maybe. With another perhaps a few days behind it.
So that will help, some.

~~~~

The cruncher I just posted in the "Pics of your Farm" thread got taken down today to redo the TRUE, and a few other things. I was getting very high temps on Core(s) 0 and 1.

So I redid the mount and this time instead of putting cardboard between the bracket and the HS I used a washer that I superglued to the bracket. I went with Shin Etsu instead of MX-2, as well. So, I'm very interested in seeing how the temps look when I get it back up in a little bit. This was my fastest machine at one point and I'd like to get it back "up there".

I also mounted an eSata bracket to the front panel, and am moving my soundcard into this rig. I took a few more pics of it and will post them in that thread.
This will be my "main rig" in the back of the house.

Onward and Upward!
03-27-2008, 07:36 PM
[XC] 4X4N

Have you lapped any of the TRUE's you use? I have 2, both lapped, one has a washer glued to the bracket also. The other is the newer version and doesn't need it to be tight. But both of the them had a very rounded base. Lapping gave me about a 5 dergree drop across all cores. They are a pain to lap as holding them flat is awkward, but definitely worth it. Also, I have the Xigmatek S1283 cooler on one of my quads, and it performs real well. Just under the TRUE's performance, no need for lapping, and is $26 right now at mwave. You just need to get the bolt through kit as it come with push pins.
03-27-2008, 07:40 PM
Gamekiller

I'm planning to lap mine, any tips?
03-27-2008, 07:50 PM
D_A

Take your time. If you rush you'll end up rounding things yourself.
03-27-2008, 08:01 PM
Gamekiller

Thanks, what's the recommended grits to go through?
I want mine to be a flat, mirror-like surface. :D
03-27-2008, 08:17 PM
[XC] serlv

Quote:

Originally Posted by [XC] 4X4N

Have you lapped any of the TRUE's you use? I have 2, both lapped, one has a washer glued to the bracket also. The other is the newer version and doesn't need it to be tight. But both of the them had a very rounded base. Lapping gave me about a 5 dergree drop across all cores. They are a pain to lap as holding them flat is awkward, but definitely worth it. Also, I have the Xigmatek S1283 cooler on one of my quads, and it performs real well. Just under the TRUE's performance, no need for lapping, and is $26 right now at mwave. You just need to get the bolt through kit as it come with push pins.

You're right, lapping a TRUE is a major pain. Hard to get a grip, hard to get even pressure across the whole surface. I did one... :)

The last three coolers I bought were Tuniq's. Two of them in their boxes, awaiting chips. I've heard the Xigmatek mentioned, just not much. Pretty good, eh? I may have to try one. That is if I ever build another rig... :rofl:

~~
I'm kinda intrigued by the latest Noctua. Not cause I believe it can beat a TRUE, but does come somewhat close. What I'd really like to try is the version for S771. I have a real crap arrangement on one of my dual Clovers and would love to improve it.
03-27-2008, 08:22 PM
loonym

Quote:

Originally Posted by Gamekiller

I'm planning to lap mine, any tips?

:D
Since you asked, yes.

I use 4 grits only. I don't care for mirror finish, only flatness. http://images6.theimagehosting.com/100_2426.th.JPG So you see, 220,400,800 and 1000, along with the surface I work on.

I tape the paper down http://images6.theimagehosting.com/100_2428.ed7.th.JPG this just simplifies things so much

the thing needs lots of 220 work http://images6.theimagehosting.com/100_2429.99e.th.JPGsuper convex center and concave outer, some say figure 8 but I like back and forth, rotating the cooler 45 degrees every 15-20 strokes, hold the cooler with only enough pressure to prevent chatter or tipping

finally ready to start with 800 grit http://images6.theimagehosting.com/100_2441.th.JPG when the plating begins to disappear I make the reference lines so I can visually gauge my flatness as I progress, water on the paper becomes more important at this stage to eliminate chatter

almost ready for the 1000 http://images6.theimagehosting.com/100_2445.ecd.th.JPG so slow, now I wish I did more 220 :D by this point I am sanding only in one direction, rotating the cooler 180 degrees every 20 or so and being careful to apply even pressure

wooo hoo finally the 1000 http://images6.theimagehosting.com/100_2449.f7f.th.JPG I am pleased with this result

this is my 'polish' http://images6.theimagehosting.com/100_2450.50e.th.JPG like I mentioned, I don't care about mirror, just flat, clean and cool is ok

close enough for rock and roll http://images6.theimagehosting.com/100_2453.th.JPG :yepp:
03-27-2008, 11:41 PM
mike047

Nice post loonym:up:
03-28-2008, 04:25 AM
Gamekiller

Quote:

Originally Posted by mike047

Nice post loonym:up:

I agree, thanks Loonym.
03-28-2008, 06:27 AM
Torchon

I just installed BOINC on my new quad so this will improve my numbers. Running on stock tho. Need to get two more machines up (1x 2.6 P4 & 1x 3.0 P4).

Also, is 50°c very bad for my quad while boinc is running? I have the fan throttled down as much as I can to recude any noise.
03-28-2008, 06:28 AM
phelan1777

Quote:

Originally Posted by Slycer

I just installed BOINC on my new quad so this will improve my numbers. Running on stock tho. Need to get two more machines up (1x 2.6 P4 & 1x 3.0 P4).

Also, is 50°c very bad for my quad while boinc is running? I have the fan throttled down as much as I can to recude any noise.

no 50c is not bad, its not great but its not bad either

However 40-45c range would be more ideal.
03-28-2008, 12:28 PM
TheGoat Eater

I am back up and crunching a E8400at 4.05GHz (board limiting)after some time off... I am back baby!

Next a E8500 and a Q9450
03-28-2008, 12:34 PM
Movieman

Quote:

Originally Posted by TheGoat Eater

I am back up and crunching a E8400at 4.05GHz (board limiting)after some time off... I am back baby!

Next a E8500 and a Q9450

What? No E8600?:rofl:
03-28-2008, 01:41 PM
TheGoat Eater

no though I just ordered a EVGA 790i Ultra and OCZ DDR3-1600 Platinum 2x1GB for testing and I am stoked about it - also a PANTONE Huey color calibrator
03-28-2008, 07:26 PM
[XC] junglemaster

Something went down yesterday...

Easynews 4,458,057
XtremeSystems 4,269,494

My numbers were down around 20% too...
03-29-2008, 12:09 AM
Martijn

Everyone's numbers were down. 2CH also did a 'meager' 9M.

EDIT: That probably is because ESL is dropping in production again.

Show 100 post(s) from this thread on one page