Kingston Technology 2x 512MB DDR1 suggested timings
Guys, these lame Kingston Technology two 512MB sticks have bad even the SPD values: 2.5-3-3-8 (at least at 2.5V), but I wonder, if someone can suggest how to push them beyond 229MHz.
Because they did not make the 229MHz even stable. They seems to work:
http://s13.postimg.org/6tjxx38l3/Kin...ant_errors.jpg
...but then fail bad :(
I did not exactly want to reduce the O/C, so I was tweaking as much, as I can and get them at these timings:
http://s30.postimg.org/5c35srskh/Kin...nt_errors2.jpg
To run semi-stable. Good for benches, bad for usage. What shocked me, that for example even 2.90V to them did not improve stability a bit (in fact, things get worser...!!!). So auto (therefore around the 2.5V) seems to work best.
Then I tried relaxing the TRRD, TRWT from 2 to 3, but again things get - worser! WTF!
Then I tried the Async Latency from 7 to 8nS and it get... worser. Unsurprisingly things get worser at 6nS too... But the 8nS was surprising to me. Someone can enlighten me there...?
As the mobo, it is a Asus A8R32-MVP Deluxe (Radeon Xpress 3200) and the Opty can take over 2800MHz at 1.425Vcore, tested, so no problemo there. But the rams do suxx, so...
There are the important bios settigs:
http://s28.postimg.org/82s2d5cnd/Asu...eluxe_bios.jpg http://s27.postimg.org/72z0973un/Asu...luxe_bios2.jpg http://s27.postimg.org/a4udww6db/Asu...luxe_bios3.jpg http://s27.postimg.org/xkcb28q4f/Asu...luxe_bios4.jpg http://s11.postimg.org/7fpkzwbkv/Asu...luxe_bios5.jpg
(on the sidenote, when I saw the SPD, then I realized that the TRAS values for 200MHz was 8 and I used 7, as recommended for AMD64 memory controler, so might there I should start...? SPD values for 166MHz are 2-3-3-7, but at 229MHz I'm far from 166MHz...)
Funny fact: relaxing the TRAS to 8 did not help as well. Oh, well...
So as next I trying relaxing the TRC from 7 to 9 and TRFC from 11 to 12, but it still looks bad as WOT suddently quit on me, so...
Ideas need.
And once again this weird behaviour - relaxed timings TRC from 7 to 9 and TRFC from 11 to 12 - give error just sooner...!
http://s30.postimg.org/go4ggcvht/Kin...nt_errors3.jpg
WTF if going on there :rolleyes:
Tried TRFC relaxing to 13 from 11 and it seems to work more stable:
http://s21.postimg.org/yz9e08p5z/Kin...nt_errors4.jpg
But it still failed. So I tried TRFC 14 and TRC 8 (as compared to well working TRFC 11 and TRC 7) and it crashed even in YouTube video... so, very bad.
More relaxed timings = worser stability. What it this?! Some sort of sick joke?
