-
ASUS Maximus II Formula - new P45 king?
-
sweet pwr/rst buttons ;-)
-
New function of LCD Poster first shown with this motherboard. We can select in BIOS what to be shown - temperatures, voltages or RPM's :) Nice!
http://tiny.pl/k9vd
High hopes for 600+ FSB for Wolfdales.
Yorkfield quite common.
http://img213.imageshack.us/img213/2197/quadaf4.th.png
-
Jeebus what's with the heatsinkery? Got a Crosslinx chip under there or something?
-
Seems stock NB & Mosfets heatsinks are removable without removing heatpipes!
Sweat, but do you think MCW30 & MIPS P5E Mosfets waterblocks will fit on top of heatpipe?
-
must have one...! i'm waiting here...
-
-
Do you know the release date & approx $$ yet?
-
P45 has one disadvantage which is odd PL :(
http://img511.imageshack.us/img511/5994/crypq1.th.png
For trusty B2 Conroe, 480FSB seems to be stable, 485 now i see too, but 490 - no go :(
Quote:
Originally Posted by
NIZ
Do you know the release date & approx $$ yet?
Next week probably it hit stores around the globe :up:
-
2 Vcores? one for booting and one as actual working volts? Or what is it?
I think I'll get one, I know, I should stop spending money, but somehow that board is taunting me:p:
-
Quote:
Originally Posted by
pmp
Is that the lowest the board allows PMP or auto in bios ? (I hope the latter ) I have noticed the same behaviour on P5Q Dlx too when running 1:1... Running another divider than 1:1 brings a PL of 2-3 lower... at auto with bios and it could be lowered some 2-3 more with manual settings...
-
p45's are starting to come out. pmp, did you buy this board or was it a prototype that you're testing?
-
Let's flash its BIOS in our Maximus/Rampage Formula I to get more performance, LOL....
I'm sure that will work!
-
Quote:
Originally Posted by
vbo
Let's flash its BIOS in our Maximus/Rampage Formula I to get more performance, LOL....
I'm sure that will work!
In ya dreams it will :rofl:
Give us some more teasers PMP plz :D Make me sell my P5Q Dlx :rolleyes:
-
Looks great... I'm interested in one if it is proven to overclock a Q9450 better and will use the same blocks I have on my current Maximus Formula.
-
Quote:
Originally Posted by
Leeghoofd
Is that the lowest the board allows PMP or auto in bios ? (I hope the latter ) I have noticed the same behaviour on P5Q Dlx too when running 1:1... Running another divider than 1:1 brings a PL of 2-3 lower... at auto with bios and it could be lowered some 2-3 more with manual settings...
Actually with those settings, PL11 worked, PL10 didn't. Tommorow i will flash it with latest BIOS, which should behave alike those from P5Q Series, and we'll see.
Yup, 1:1 makes PL Poo Poo :(
Quote:
Originally Posted by
WhiteFireDragon
p45's are starting to come out. pmp, did you buy this board or was it a prototype that you're testing?
It's retail version already.
Quote:
Originally Posted by
naokaji
2 Vcores? one for booting and one as actual working volts? Or what is it?
I think I'll get one, I know, I should stop spending money, but somehow that board is taunting me:p:
I'm not sure yet. Dual VCore is available only when it's from 0,80V > 0,95V then it disappear. Maybe it's wise, for those who will run cold CPUs like E72xx or E82xx with passive cooling, underclocked, when one core wouldn't go with low VCore as other one ? :)
Quote:
Originally Posted by
Leeghoofd
Give us some more teasers PMP plz :D Make me sell my P5Q Dlx :rolleyes:
Tommorow i will use Wolfdale cored chip to see how it performs...
-
I thought this board is DDR2 but your CPUZ shows DDR3 so this board is going to 2 or 3? Plus I wonder when will this be out can't wait? Oh by the way the CPU volt pin is that require 4 or 8 looks like 4 of them got covered up or it works both 4 and 8 pins? Thanks,
-
Nice looking board be good to see some proper testing:up:
-
hmm.. looking it have a little problem with Perf Lvl same as other P45 :( Thanks for sharing mate ;)
Can't wait for playing it :D
-
Quote:
Originally Posted by
mr2sw21
I thought this board is DDR2 but your CPUZ shows DDR3 so this board is going to 2 or 3? Plus I wonder when will this be out can't wait? Oh by the way the CPU volt pin is that require 4 or 8 looks like 4 of them got covered up or it works both 4 and 8 pins? Thanks,
Its a bug of cpu-z. Its ddr2.
The 8 pin molex for cpu requires at least 4, better use 8 for more stability.
-
Is there any chance that EIST will run with OC or the EPU-6 Engine let chill my CPU in idle?
If i saw the the two CPU VCore i hoped a little bit that one is for idle and the other for load :)
-
Quote:
Originally Posted by
mr2sw21
I thought this board is DDR2 but your CPUZ shows DDR3 so this board is going to 2 or 3? Plus I wonder when will this be out can't wait? Oh by the way the CPU volt pin is that require 4 or 8 looks like 4 of them got covered up or it works both 4 and 8 pins? Thanks,
Ahh exactly like Arne said above - just a CPU-Z poo poo.
Quote:
Originally Posted by
ZoLKoRn
hmm.. looking it have a little problem with Perf Lvl same as other P45 :( Thanks for sharing mate ;)
Can't wait for playing it :D
Yup, but maybe new BIOS build would make things easier :)
Quote:
Originally Posted by
jooney
Is there any chance that EIST will run with OC or the EPU-6 Engine let chill my CPU in idle?
If i saw the the two CPU VCore i hoped a little bit that one is for idle and the other for load :)
Ohh don't ask me about EPU-Six. Last time i tried to use it at clean VistaOS + P5Q3 Deluxe - it ended with OS corruption :rofl:
But IIRC (please someone correct me if i'm wrong) EPU-Six could work only (in terms of doing "something" to CPU VRM) with EIST enabled and AI Tuner set to Auto.
It has some turbo (raised fsb etc) modes available, but for me, only visible thing was damaged OS :ROTF:
-
Quote:
Originally Posted by
NIZ
Do you know the release date & approx $$ yet?
yea the ultimate questtion..
thaqt is one sweet looking MB
-
Oh yeah, I can't wait to hear the results :up:
-
Quote:
Originally Posted by
aster
Seems stock NB & Mosfets heatsinks are removable without removing heatpipes!
Sweat, but do you think MCW30 & MIPS P5E Mosfets waterblocks will fit on top of heatpipe?
Along the same line, I wonder if my Maximus Formula EK MOSFET sinks will work on this..