Usual rules... got a card? Post up high-res pics and lets get hardmods sorted out :) :up:
The guy I work with just bought one so I *might* be able to get 5 minutes with it+ a camera or get him to do it
Printable View
Usual rules... got a card? Post up high-res pics and lets get hardmods sorted out :) :up:
The guy I work with just bought one so I *might* be able to get 5 minutes with it+ a camera or get him to do it
HD 5750 VMod
http://www.abload.de/img/5750-vcore-modyzyv.jpg
http://www.abload.de/img/img_1830rxlf.jpg
http://www.abload.de/img/img_1832gxse.jpg
tested and aproved, for results see hwbot 5750 categorie ;)
Thanks guys :D
What IC's? Hard to read from pics...
sorry :) it is a uP6201BQ
What about Vmemmod any one found that i am getting four HD5770 soon
The 5770 reference has no IC2 interface ? Aka soft vmod, if you flash it to the asus bios you'll can use the Asus software for change the vcore.
Best regards
Wy is it that it is only asus there can make software with voltage change for the HD4770 and HD5770?
5770 has Volterra VT243WF memory VRMs (those north of GPU VRMs), and those chips don't need any external controllers so no need to try to find one.
Shamino posted a possible mod for VT242WF over here - and it should work on VT243WF too. If it works on VT242WF, that is.
Thanks alot for that info
The vgpu mod works fine it is the same as on the HD4770
I found this a couple of days ago...
Do u think it would work???
http://img97.imageshack.us/img97/4655/pencilhardmod.jpg
As what ?
Is it memmod for the 5750?
Where is it located?
Edit found it...
Has anyone found the vMEM measuring points for the 5770????
Also hard mod for the 5770???Seems 1,35 is too little for 1100 core :P
I found them!!!Here are some measuring points for the voltage on 5770!GDDR5 get 1,6ish volts right???
http://img11.imageshack.us/img11/7663/vmeasuring.jpg
hard mod is the same as for the HD4770 and vmem is measured best at the small smd capisators around the mem chips adn i can do 1100mhz core at 1.312v on all my 4 cards
1100?????WOW what brand and what bios is this on???Also did u measure the volts with a multimeter???
it is saphire all 4 cards and yes it is measured in afterburner if u set it to 1.35 i get 1.39
i cant seem bench over 1040/1420 stable...U are very lucky on 1100 man!!!
This is probably world exclusive!!!5770 CAP MOD!!!
The card works but i have yet to confirm any stability improvements during HIGH OC...Maybe i need another 3 caps added...And some 16volts on the input too...Will update soon!
http://img22.imageshack.us/img22/796/dsc01893j.jpg
http://img8.imageshack.us/img8/3451/dsc01891z.jpg