Amazing stock cooler
Printable View
Does it throttle the multi under load??????????????????
I don't know i have a 980x without power limitation and i use high multi.
Still no info when it gone b avaible in UK =/
Iīm using stock cooler, i have done 5ghz bit only suicede shot :(.
To benhching on 3dmark vantage the 1,32 vcores is not enough....
yess ....you got nice chip Bro...:up:
you just need higher Vcore and you can run Vantage try with raise higher Vcore like this one...:)
http://img442.imageshack.us/img442/428/11577108.jpg
Anybody in Belgium.....just snagged this board..its in stock @ alternate.be and 2 Zotac 480's :D:D 8 zotacs left
Can someone confirm this test:
Boot on the borderline stability; make sure you just past a Spi 8m or 16m and memtest, then with same settings go to BIOS and select enable 2 cores only on the 980x, see if that causes instability.
Have just found somewhere in the uk with RE3 stock!
http://www.pixmania.co.uk/uk/uk/5427...&CodePromo=oui
http://www2.picturepush.com/photo/a/...x/DSC03494.jpg
I will try with more vcore!!
I am testing BIOS 0534, seems it is the best BIOS up to now! ;)
Can you share it or is it just for you to test?
Thanks
RampageIIIExtreme0534_rom.zip
Really someone can give me some input on bloomfield bclock...
Thanks!
Try to reflash, it works perfectly here!
Use Asusupdate to flash 0534, it will be okay, no such warning! :)
Just got the board a couple hours ago and popped the 920 in. I got this BCLK right away and have been working on it since. It won't go even .2 more BCLK more than this, seems like a pretty hard wall. It doesn't want to go this high with any higher multi on the proc either, even if I turn off HT, lower Uncore and mem (didn't realize it defaulted to 2T on the mem until I took the screen shot). Anyway, it was a first shot with it and I haven't used an Asus board in a while. I'm sure with some tinkering and/or some cold, it's going higher.
I am going to try it with the 534 BIOS and see what gives...
http://i10.photobucket.com/albums/a1...e/243_bclk.png
is that under phase Boostevo ?
Nah, WC. I just got the board and haven't made any insulation yet...