-
2-Stage Cascade Project
Its time for the next step in Phase Change cooling, so decided to build a 2 Stage Cascade.
It will consist of:
1st Stage
- Mitsubishi RE313VDMT Rotary 18k BTU/31.3cc
- 3KW Condenser 43x38x17CM
- 30cm Fan 25Watt
- 1.1L Receiver
- Danfoss TS2 TEV metering device
- Danfoss Eliminator molecular filter 1/4''
- Danfoss KP17 Pressostat
- Sight Glass
- Hi/Lo Manometers
- XMT7100 Thermometer
- R404a
1st and 2nd Stage will meet in an 40Plate HX
2nd Stage
- Mitsubishi RE207VHSMT Rotary 12k BTU/20.7cc
- Oil Separator 1/2''
- Danfoss Eliminator molecular filter 1/4''
- Danfoss KP17 Pressostat
- BartX 54mm Evaporator
- Tecumseh 2.35L Expansion Tank
- Hi/Lo Manometers
- XMT 7100 Thermometer
- R1150
Cascade will build in a 52x75cm Base Plate
https://i.ibb.co/gr4xvMF/IMG-20210323-170938.jpg
https://i.ibb.co/HxKhN5w/IMG-20210323-231834.jpg
https://i.ibb.co/nrjQrQ8/IMG-20210328-174359.jpg
https://i.ibb.co/n33LGK0/IMG-20210327-214724.jpg
https://i.ibb.co/VmgtBmt/IMG-20210327-214739.jpg
-
You have some really awesome parts, good luck with the build!
-
-
-
Very clean looking, you're making good progress on the build! What temps and load are you aiming to achieve? :)
-
Thanks, I would like to have -115C idle/-100C Load @ 350-400w.
A little more progress
https://i.ibb.co/6n05g1h/IMG-20210408-190517.jpg
https://i.ibb.co/5WndPwS/IMG-20210408-190556.jpg
And the thermostat for automatic power on the 2nd stage when 1st stage goes down to -40C
https://i.ibb.co/svtsV2j/IMG-20210408-121055.jpg
-
-
-
Man thats a very nice clean build !
-
I wish I put more time into making mine look nice, people are kinda shocked at how frankenstein mine looks. A really nice build
-
Thanks, its a really compact cascade, a bit tricky to fit them all in 50x70cm base but I am used to work in limited space :) ( human abdomen )
-
-
Thanks for the updates, very clean work. When I built my cascade 20 years ago, I waited until I had everything before I assembled and when I assembled it took me 24 hours to finish gassing the third stage.
-
-
Beautiful Work. I always thought that phase systems should be totally encased because I was dedicating the unit to one build at a time.
-
-
Fantastic results and quality craftsmanship. How has the overclocking experience been for you so far with those temperatures?
-
-
-
Very clean build, looks fantastic and seems to perform very nicely! I am beyond envious that you can get ethylene, I've been wanting that for the last 20 years or so.