Biostar TA785GE 128M modded Bios X2@X4 ready for downloading

Fresh from NDA today we have the modded bios for the first Biostar 785G board.

grab this file here
http://www.4shared.com/file/12280804...128M_0720.html

Please ready before flashing
Set your system back to stock prior to flashing and after updating bios to the new one you just need to follow this steps
HT link @ 1.6GHz
ACC @ all cores
Value(all cores) @ -2%


and of course its work :D

http://img300.imageshack.us/img300/2931/016gvt.jpg
http://img355.imageshack.us/img355/8...550x4prime.jpg

but haven't tested it much as Nehalem was keeping me occupied ,so today I decided to give cold to hit the MAGIC6 barrier with a X2 @ quad and using a pocket board :D

http://img80.imageshack.us/img80/9586/1ok.jpg
http://img233.imageshack.us/img233/5636/6ghzok.jpg

you would like to try it at your own risk
;)

modded bios collection :D

TA785GE 128M
http://www.4shared.com/file/12280804...128M_0720.html

TA790GX 128M
http://www.4shared.com/file/11825671...0GX_128M_.html

TA790GX XE
http://www.4shared.com/file/11825679...A790GX_XE.html

TA790GXB A2
http://www.4shared.com/file/11825686...90GXB__A2.html

TA790GX_A3(R1)
http://www.4shared.com/file/11799696...X_A3__R1_.html

TA790GXBE(R1)
http://www.4shared.com/file/11799703...0GXBE_R1_.html

TA790GXE(R1)
http://www.4shared.com/file/11799719...0GXE__R1_.html

TA790GXE_128M(R1)
http://www.4shared.com/file/11799712...128M__R1_.html


:D

That's just insane stuff :),thanks for posting :up:

and whats new about your x4 965 BE? tested it now?

Quote:

---

Originally Posted by informal

That's just insane stuff :),thanks for posting :up:

---

thx m8

Quote:

---

Originally Posted by FlanK3r

and whats new about your x4 965 BE? tested it now?

---

please dont share too much,because that board is TDP rated for 125watts cpu hehehe

http://img219.imageshack.us/img219/4794/965onair.jpg
http://img522.imageshack.us/img522/1822/cpu4602.jpg

all air with dual San Aces @ 260CFM each
room temp 20c
;)

:eek::eek::eek:
4.6Ghz on air and on that cheap board?? :clap:

Simply amazing stuff,again:D
You're the man indeed :yepp:

PS hehehe @ 125W rating &965BE comment :)

Quote:

---

Originally Posted by informal

:eek::eek::eek:
4.6Ghz on air and on that cheap board?? :clap:

Simply amazing stuff,again:D
You're the man indeed :yepp:

---

I cant wait for the winter
5GHz maybe :D

Quote:

---

PS hehehe @ 125W rating &965BE comment :)

---

im sure about the MB but 965BE is just speculation :D
i guess ;)

Quote:

---

Originally Posted by PcCI2iminal

im sure about the MB but 965BE is just speculation :D
i guess ;)

---

Well of course :D.
Again thanks for posting the results,made my day :)

PS The LN2 X2@X4 result is simply stunning ;). The bad thing is the Ln2 is more expensive than the board + CPU :D,but extreme benchers don't mind the cost I guess :)

Quote:

---

Originally Posted by informal

Well of course :D.
Again thanks for posting the results,made my day :)

PS The LN2 X2@X4 result is simply stunning ;). The bad thing is the Ln2 is more expensive than the board + CPU :D,but extreme benchers don't mind the cost I guess :)

---

well,i spent my last 100 dollars on LN2 :S
but I got two consecutive benching days :D

Quote:

---

Originally Posted by PcCI2iminal

thx m8



please dont share too much,because that board is TDP rated for 125watts cpu hehehe

http://img219.imageshack.us/img219/4794/965onair.jpg
http://img522.imageshack.us/img522/1822/cpu4602.jpg

all air with dual San Aces @ 260CFM each
room temp 20c
;)

---

omg....with AIR is great, omg...my "little" x4 955 only 4240MHz with AIR :-/

PcCI2iminal, very good oc....

one small question about GX 128mb.. I have your latest bios and tried ACC without luck. Can you tell me settings so I can try all before I call the cpu as dud :) ? I thought that I maybe missed something in Bios.

Quote:

---

Originally Posted by FlanK3r

omg....with AIR is great, omg...my "little" x4 955 only 4240MHz with AIR :-/

---

4240MHz still amazing bro,i was stuck at same speed but its all about the room temp and the cooling :D

Quote:

---

Originally Posted by Tomasis

PcCI2iminal, very good oc....

one small question about GX 128mb.. I have your latest bios and tried ACC without luck. Can you tell me settings so I can try all before I call the cpu as dud :) ? I thought that I maybe missed something in Bios.

---

ACC @ auto will not work, please make sure the settings does match this request
HT link @ 1.6GHz
ACC @ all cores
Value(all cores) @ -2%

if it still a no go ,i think the last core of your cpu can not be unlocked :(

965 ,, a one too drool overchip indeed..

Dang ,nice clocking Bro:up:

Quote:

---

Originally Posted by gOtVoltage

965 ,, a one too drool overchip indeed..

Dang ,nice clocking Bro:up:

---

thx m8 :D

a little update

http://img87.imageshack.us/img87/8251/13294725.jpg

:D

this is what?:) DICE?

Would you say this board clocks better or worse than TForce TA790GX ?

oops nevermind DDr2.

although i dont have the board, it is always nice to see peeps getting this kind of thing up on XS rapido, nice one PcCI2iminal.

and very nice clocks there

nice initial 965 benchmarks!

Quote:

---

Originally Posted by richierich

nice initial 965 benchmarks!

---

+1 on that

might have to build me an amd rig :)

thx guys :D

Quote:

---

Originally Posted by FlanK3r

this is what?:) DICE?

---

LN2 ,i know the 5300MHz is not so impressive but its only an uATX with a very poor VRM

Quote:

---

Originally Posted by trans am

Would you say this board clocks better or worse than TForce TA790GX ?

oops nevermind DDr2.

---

both are equal on air

Thanks for sharing and info PcCI2iminal-san :up:

Quote:

---

Originally Posted by PcCI2iminal

thx guys :D



LN2 ,i know the 5300MHz is not so impressive but its only an uATX with a very poor VRM



both are equal on air

---

PcCI2iminal, I am very impressed with your hwbot world record with the x2 550/biostar ta785GE 128M!
:toast: this would be my 1st amd rig since 939 dfi lanparty/bh5 days. I am looking for a cheap setup just to get my feet wet and I have no ddr2 left. I gave it all away so this would have to be AM3 for sure.
Whenever I buy boards the 1st thing I do is go to hwbot and check all the wr's in the same platform i'm looking to buy. All the x4 955be are either in MA790FXT-ud5p / crosshair III / M4A79T Deluxe / or dfi m3h5
Your x2 result is what interests me since they can be unlocked. What I always do with a new board/cpu is 1st I'll get it home and stick a stock fan on it and load a fast win install and then take the stock cooler off and start making cpu templates by placing a piece of thin paper over the socket area and rubbing lightly over it with a pencil so I can cut a template for the socket insulation. you know the drill..........

Then bench it under dice or ln2 and then if its worth keeping I'll use it as my gaming rig until the next wave comes along. This is how the game goes and you all know it.

anyway I can get a open box (rma) TForce TA790GX A3+ AM3 AMD 790GX from newegg for 78.00
http://www.newegg.com/Product/Produc...2E16813138141R

and a x2 550 for $102 http://www.newegg.com/Product/Produc...82E16819103680

$180.00 total.

should I go for it and see if I can beat your hwbot wr? or should I wait for a 965 to hit retail channels in US? I really need 4 cores going for my editing. I'll tell you what I'm currently running since I sold all my good hdware was still worth something. Here's my aging hardware:

-rampage extreme x48
-c2d wolfdale e8200 @3.6ghz
-8gb assorted ddr3
-win7 64
-2 x 4850 crossfire
-tx750 psu
a gtx480 rad on the cpu with a D-Tek FuZion V2

I think I really cant go wrong with a new rig for 180 bux. My last question is does the TA790GX A3+ clock as well as your ta785GE 128M under subzero temps? I need ddr3.

thanks man and keep breaking records!

http://i239.photobucket.com/albums/f...alsmith/wr.jpg

Quote:

---

Originally Posted by ZoLKoRn

Thanks for sharing and info PcCI2iminal-san :up:

---

Thanks Zolk ;)

Quote:

---

Originally Posted by trans am

PcCI2iminal, I am very impressed with your hwbot world record with the x2 550/biostar ta785GE 128M!
:toast: this would be my 1st amd rig since 939 dfi lanparty/bh5 days. I am looking for a cheap setup just to get my feet wet and I have no ddr2 left. I gave it all away so this would have to be AM3 for sure.
Whenever I buy boards the 1st thing I do is go to hwbot and check all the wr's in the same platform i'm looking to buy. All the x4 955be are either in MA790FXT-ud5p / crosshair III / M4A79T Deluxe / or dfi m3h5
Your x2 result is what interests me since they can be unlocked. What I always do with a new board/cpu is 1st I'll get it home and stick a stock fan on it and load a fast win install and then take the stock cooler off and start making cpu templates by placing a piece of thin paper over the socket area and rubbing lightly over it with a pencil so I can cut a template for the socket insulation. you know the drill..........

Then bench it under dice or ln2 and then if its worth keeping I'll use it as my gaming rig until the next wave comes along. This is how the game goes and you all know it.

anyway I can get a open box (rma) TForce TA790GX A3+ AM3 AMD 790GX from newegg for 78.00
http://www.newegg.com/Product/Produc...2E16813138141R

and a x2 550 for $102 http://www.newegg.com/Product/Produc...82E16819103680

$180.00 total.

should I go for it and see if I can beat your hwbot wr? or should I wait for a 965 to hit retail channels in US? I really need 4 cores going for my editing. I'll tell you what I'm currently running since I sold all my good hdware was still worth something. Here's my aging hardware:

-rampage extreme x48
-c2d wolfdale e8200 @3.6ghz
-8gb assorted ddr3
-win7 64
-2 x 4850 crossfire
-tx750 psu
a gtx480 rad on the cpu with a D-Tek FuZion V2



thanks man and keep breaking records!

http://i239.photobucket.com/albums/f...alsmith/wr.jpg

---

thanks m8 ,your goal is not that hard to get ,you have the skills and you just need to buy a good X2 550
well ,i think all these X2 550 BE does 5.8GHz+ on LN2 ,because Ive tried several chips and me got 6GHz in all of them ,but to find a good for unlocking is not so easy,just 50% of all Mojo's AMD 550 can be unlocked.

but in the other hand,these chips are very cheap and you can start to looking for a good chip for unlocking or just ebay the fully locked chips.

Quote:

---

I think I really cant go wrong with a new rig for 180 bux. My last question is does the TA790GX A3+ clock as well as your ta785GE 128M under subzero temps? I need ddr3.

---

TA785GE 128M can reach insane clocks like TA790GX A3+ ,but is hard to handle in extreme conditions.
so ,if you want a easy way to get 6GHz+ and the WR on HWbot go TA790GX A3+

but,if you want a good challenge...TA785GE 128M is a way to go :D

TA785GE 128M retail version at home :D

http://img245.imageshack.us/img245/632/001cex.jpg

Okay i just ordered the 790GX A3+/ 550be

***********************UPDATE

just got the cpu. Its 0925 APMW.

so far so good.