DDR4 OC Corsair - GSkill - Adata - Crucial

Corsair up first

Vengeance LPX XMP 2666C15 XMP 2800C16 (3000C13 1T)

I had a hard time on Gigabyte X99, this board did not have firmware 25 implemented in bios. I could not get the memory up to speed. I will test with SOC and new BIOS later)
http://fugger.ipage.com/x99/gbsan1.png

Decent CPU performance
http://fugger.ipage.com/x99/cb15%20gbt.png

Stepping over to the Asus RVE - HUGE difference
http://fugger.ipage.com/x99/san5.png

5.5Ghz on 3 stage cascade, Corsair delivering strong.
http://fugger.ipage.com/x99/p4.png

Adata 2400C16 32GB 8x4GB kit (2666C13) Shows how far behind the Gigabyte board is.
http://fugger.ipage.com/x99/adata.png

Crucial 2133C15 4x8GB 32GB kit (2666C12)
http://fugger.ipage.com/x99/crucial32gb.png

Gskill 3200C16 16GB Kit "Ripjaw 4" (3400C15) Testing out past 3400, dialing in.
http://fugger.ipage.com/x99/memory-4598.bmp
http://fugger.ipage.com/x99/memory-4998.png

Where are the GSkill results? I am still producing results and the bulk will be in that tread.

The Corsair have a ton of headroom, they can be pushed above 3k with similar timing.

The GSkill are binned to the max speed and have very little headroom above max speed.

Both are capable of the same timings so far. Gskill is the better bin, Corsair have better XMP profile, I was able to squeeze more bandwidth from the Corsairs at 3k.

I have tried upwards of 1.7v pushing Hynix MFR.

The Micron single sided are crap, a cheap PCB and are capable of 2400Mhz on average.

Micron double sided are with better PCB, they are built far better than the single sided. 2666C12 should be common. Micron at that speed will deliver higher bandwidth than the Gskill or the Corsair. Its a dual rank dual side performance boost.

I have pushed up to 1.7v on the Micron, not much gain after 1.5v. Voltage will not help Micron break 2666Mhz, they top out around here and there are a few 2800Mhz modules to be found with binning.

The Adata 2400C15 are single sided Hynix MFR 2400Mhz and they will not clock much above that.

I have not tested Samsung yet.

The G.Skill 3200C16 kit is pretty nice:
http://valid.canardpc.com/480iv5

http://i61.tinypic.com/2enufdl.png

Quote:

---

Originally Posted by sin0822

The G.Skill 3200C16 kit is pretty nice:
http://valid.canardpc.com/480iv5

http://i61.tinypic.com/2enufdl.png

---

They are pretty awesome aren't they sin?

Quote:

---

Originally Posted by l0ud_sil3nc3

They are pretty awesome aren't they sin?

---

you are pretty awesome George :)

Aw, how sweet. :up:

Gskill 3200 batch 1437XXXXX voltage sweet spots

3200 CL15 @ 1.25V

http://www.overclock.net/content/type/61/id/2210016/

3200 CL12 RTLs/IOs 49/49/6/8 @ 1.595V

http://www.overclock.net/content/type/61/id/2210017/

http://www.overclock.net/content/type/61/id/2210018/

http://i.imgur.com/4m042HY.png

Exact Vdimm, more or less then system will bd or bf at boot.

I really like this Corsair LPX kit, there are Hynix MFR single sided under the heat spreader and mine do not like going over 3Ghz with XMP settings. Loosening can get 3200Mhz.

I pushed up to 1.75v and they keep scaling, I wanted to go for 1.8v+ but I am on air.

Intel 5960X 3427B
Rampage V Extreme
Corsair LPX 2666C15
Thermaltake Ultimate 3.0 All in 1 water cooler
Modded 10K BTU AC Unit
Custom air duct and hood for when things go good.

http://fugger.ipage.com/x99/lpx.jpg

That is nice AIR result Charles :)

"Thermaltake Ultimate 3.0 All in 1 water cooler
Modded 10K BTU AC Unit
Custom air duct and hood for when things go good.

Max CPU Core 0 temp 24 :) "

Gskill 3200C16 @ 3333+ 1.35V

http://www.overclock.net/content/type/61/id/2220347/

http://www.overclock.net/content/type/61/id/2220348/


Corsair DPlat 2666C15 @ 3000 1.275V

http://www.overclock.net/content/type/61/id/2220349/

I need to get more kits in for testing. Anyone seen anything from Samsung DDR4?

Quote:

---

Originally Posted by FUGGER

I need to get more kits in for testing. Anyone seen anything from Samsung DDR4?

---

are you able to sample their new 32gb single stick modules or the 128gb kits ?

Quote:

---

Originally Posted by FUGGER

I need to get more kits in for testing. Anyone seen anything from Samsung DDR4?

---

You need these!

http://www.extremetech.com/wp-conten...-2-640x409.jpg
http://www.extremetech.com/computing...ve-128gb-dimms

Looking at the NewEgg product page for Dominator Platinum 32GB DDR4 2400, it seems Corsair is using Samsung (Ver4.23): http://www.newegg.com/Product/Produc...82E16820233714

5.2Ghz on air 8core 16 thread enabled with sensors up.
I am booting into widows at this speed.
If I disable HT this chip does 5.4Ghz for screen shot on air.

http://fugger.ipage.com/x99/maxd.png

Quote:

---

Originally Posted by FUGGER

Anyone seen anything from Samsung DDR4?

---

Testing it

http://i.imgur.com/6OkZV5n.png

Quote:

---

Originally Posted by FUGGER

5.2Ghz on air 8core 16 thread enabled with sensors up.
I am booting into widows at this speed.
If I disable HT this chip does 5.4Ghz for screen shot on air.

http://fugger.ipage.com/x99/maxd.png

---

wow, Charles, where did you found?:D Air is what cooler exactly?

nice dumo my corsair kit turned out to be samsung :rolleyes:

That was using True120 and AC blast, the TT Ultimate is better. I was able to boot into windows at 5.4Ghz.