I think 903 is best atm
Printable View
I think 903 is best atm
Ive gotten further with my Celly D with 903 than any other BIOS so far. My conroe should be here sometime mid week, its a 6600 Retail, so we will see where it goes.
People who have this board, do you like this board? Would you recommend it to someone why is trying to get an OC of only like 3GHz or so?
Quote:
Originally Posted by ruler22
easily.
Definately a fine board if you only want 3ghz ;)Quote:
Originally Posted by ruler22
Hopefully this will get better with newer BIOS-versions...Quote:
Originally Posted by lawrywild
Does anyone else have the problem where cpu-z reports the wrong cpu voltage once you go over 1.425-1.450 in the bios? Not sure if this is a bios issue or a cpu-z bug.
Quote:
Originally Posted by vmsein
yes. ignore it.
P5WDH ; retail box E67600 ; ddr 1000 4 5 4 15 ; bios 0903
If I select anything over ddr 900 in bios I get no post at all
Hyperpath 3 disabled
vdimm 2.2
vcore 1.4265
pcie 105
pci 33
vmch 1.55
I can now enable mem timings as before it would not boot if I did that.
EDIT: It seems that the limitation of posting with more than ddr 900 selected in bios has something tied to what fsb you are running. I lowered my fsb to 270 at the suggestion of another member and now I can select ddr 1080 and am in windows. So my ram is @ 540Mhz 4 5 4 15 1:2 so far. But I am not liking the low fsb. Super Pi is slower
tallman why 105 for pci-e ?
having problems with mine ..running FSB 370 atm at 1,425v ...45-47c under occt torture...pretty nice...but i want more :D ...thx devil will try SPD for RAM...hope it helps...but it seems voltage doesnt help much when making it stable......
That was a through-back from when I was pushing my 805D. It worked there so I tried it here. Now I am back to auto volts for everything except vcore and vdimm and I am at 366 fsb, 1.5 vcore 2m prime stableQuote:
Originally Posted by [G.N.U.]Fragman
Attachment 49923
cpu-z shows wrong volts and AiBooster shows wrong fsb,,,,,,AiBooster also shows the randon 255-256c core temp
all the asus software is so slow..like it was coded in java....uses everest to tell me most of it....
how about that FSB thingy down at vdimm (below vcore) ???
and the last ihc i think the name is...something to change ?
Yeah, I have Everest now too. It sure puts a lot in sys tray though
fsb termination----I tried changing it and am back at "auto" with it
ICH voltage---I played with it also----again, I am back to "auto" there as well
Quote:
Originally Posted by MacClipper
Happens in AiBooster also
I know this is not exactly what you are looking for in this thread, but my biggest problem with the Asus P5 DH is simply finding one. They seem to be out of stock EVERYWHERE except EBAY where sellers are nearing $300 counting shipping...
wow now i feel good about paying under $250 shipped for mine a while ago
Some of you may be interested in this that I found in another thread
Credit for the post below goes to lopri:
" People who can't go past 360~370FSB, it's not because your board is crappy. It's by design. ASUS is forcing tight chipset timings at 1066 strap, which will set the FSB wall at base 266FSB +100FSB. (It's too long to explain and I just learned about it myself). If you want to go past that wall, you HAVE TO give up 4:5, 3:5, etc. 1:1 will take you up around 430 (333 base FSB + 100). After that you have to give up 1:1 to go up higher, but at that point the chipset will physically give up at 1.65V max. Again, it's by design. Asus went on the route to tighten the chipset timings that's why we see the fastest PI scores on this board. On the contrast, Gigabyte went on the opposite way (w/ DS3, I don't know about other models) and that's why we see such sky high FSB but their memory dividers/timings are all messed up.
If your memory is good up to 1066MHz, try running 1:2 @266FSB. It'll run like a charm. "
I have one of these mobo's pre-ordered at acortech.com (they told me they had 2 in stock when i ordered, but they lied and they were pre-ordered) but im going to see if I can get one off newegg when they get them in stock again, which should be tomorrow or tuesday
Try here:http://www.antaresdigital.com/Quote:
Originally Posted by csidden
looks good tooQuote:
Originally Posted by dad11345
http://www.resellerratings.com/seller11455.html
even mentions someone getting a conroe from them, WAY early...
EDIT unless they were talking about yonah or something, WAY late...
Interesting, BUT i cant to run my RAM on 1066 @everything defaults = FSB 266, if i will set at default 1066 mem divider my system is posting but with loading of windows i have this message : File : C>//////win/...config is broken, repair it with CD and push R key ... and reboot ...Quote:
Originally Posted by Tallman
can you guy tell me max FSB of E6300 on this board ?
There are benches with mine and a 7950 GX2 here:
http://www.nvnews.net/vbulletin/showthread.php?t=74516
About the 8th post.
Purchased (I got the last one!) - Thank you! :toast:Quote:
Originally Posted by dad11345
:toast:
My P5WDH shipped today, my retail E 6400 is at home allready!!
:banana: :banana: :banana:
So, you'll see some benchies tomorrow maybe...^^