A8r32-mvp

Printable View

Show 100 post(s) from this thread on one page

02-27-2006, 01:33 PM
hal2710

A8r32-mvp

Hi All,

Got this baby today..

Having fun 12 min of O/C !!!!!

http://valid.x86-secret.com/show_oc.php?id=75118

LOL :banana: :banana: :banana: :banana:

Hal2710
02-27-2006, 01:39 PM
GoriLLakoS

Aren't you on nda?????:D
02-27-2006, 01:58 PM
AndreYang

NDA~~~~~3/2 post~~:)
03-01-2006, 07:26 AM
Rodzilla

Mine will be here tomorrow or Friday :cool: Get some FX-60 action going on! Oh... btw... I'm on a rampage today... ZZF is the devil!
03-01-2006, 07:39 AM
korda

If someone spots the new bios for this mobo, please reply here. :D
Asus hasn't posted it yet.
03-01-2006, 12:37 PM
Rolle2k

Anybody who have this board that can tell how stable the CPU voltages are?
I would like to know if it's better or worse than the old DFI lanpartys (the ones with 3-phase power).
Maybe somebody who have both boards that have swapped the DFI to the ASUS, and can tell which one that the CPU goes higher on (stable of course)?
03-01-2006, 12:39 PM
JasonDTM

They said vcore + vid totaled up to 1.7v but vdimm is still locked around 3.2v or 3.3v from what I've heard.
03-01-2006, 12:52 PM
SIOUX

1.55 is max vcore for this board:( and 3.2 max vdimm
03-01-2006, 12:53 PM
Rolle2k

JasonDTM: yes, but that doesn't tell anything about the vCore stability :)

SIOUX: no, it should be two vCore settings, and it should be possible to get over 1.7v when you max both of them, that is for cpu's with 1.35v default voltage.
03-01-2006, 01:21 PM
Rodzilla

Quote:

Originally Posted by Rolle2k

JasonDTM: yes, but that doesn't tell anything about the vCore stability :)

SIOUX: no, it should be two vCore settings, and it should be possible to get over 1.7v when you max both of them, that is for cpu's with 1.35v default voltage.

You are 100% correct! Also note it's dependant on the cpu you have installed.
03-01-2006, 01:28 PM
SIOUX

As far as i can se in the vrzone review the bios let you get 1,4v + 0.02 from the other setting

"To boost core voltage over 1.4v, you can use the VCore over-voltage option to give it up to a +0.2v boost."
03-01-2006, 01:35 PM
Rolle2k

Quote:

Originally Posted by SIOUX

As far as i can se in the vrzone review the bios let you get 1,4v + 0.02 from the other setting

"To boost core voltage over 1.4v, you can use the VCore over-voltage option to give it up to a +0.2v boost."

Anandtech tested up to 1.75v in their review if i remebered correctly, so vrzone must have missed one setting.. with a 1.35v cpu you have voltage first up to 1.55 (or whatever it was) and then there was another setting that could add +0.2v if i remembered correctly.

Anyway as i'm on air, this will be enough.

But then my question again. is the CPU voltage stable? or does it float alot?
03-01-2006, 01:42 PM
SIOUX

Quote:

Originally Posted by Rolle2k

Anandtech tested up to 1.75v in their review if i remebered correctly, so vrzone must have missed one setting.. with a 1.35v cpu you have voltage first up to 1.55 (or whatever it was) and then there was another setting that could add +0.2v if i remembered correctly.

Anyway as i'm on air, this will be enough.

But then my question again. is the CPU voltage stable? or does it float alot?

well...i hope you/they are right:)
03-01-2006, 01:46 PM
Tony

0307 Beta bios, used on the AT review I hear...

grab it here.....use and flash at own risk!!!!
03-01-2006, 01:47 PM
Rodzilla

Tony... you are the man! People (including myself) have been looking for this! :up:
03-01-2006, 02:00 PM
mongoled

Must admit, was left a little dissopinted with wht i saw at the vr-zone review. The board looks like its ok, but does not offer the crazy ovrclks tht DFI offer out the box. Unfortuntely its going to be a while be4 DFI board shows up (im guessing this).

Hopefully forum members can show tht my above thought are wrong

:)
03-01-2006, 02:10 PM
Blacklash

Yep this is coming:

http://www.anandtech.com/mb/showdoc.aspx?i=2703&p=2

I am skipping ASUS this time. Should be a couple of weeks until it's available, or possibly sooner.
03-01-2006, 02:21 PM
mongoled

Quote:

Originally Posted by malficar

Yep this is coming:

http://www.anandtech.com/mb/showdoc.aspx?i=2703&p=2

I am skipping ASUS this time. Should be a couple of weeks until it's available, or possibly sooner.

Nice one, very happy now, just hope we dont see any silly delays

:woot:
03-01-2006, 02:37 PM
VulgarHandle

Quote:

Originally Posted by malficar

Yep this is coming:

http://www.anandtech.com/mb/showdoc.aspx?i=2703&p=2

I am skipping ASUS this time. Should be a couple of weeks until it's available, or possibly sooner.

this looks to be the board ill be getting..

finally, been 2 months now i been trying to decide which board to get, and finally see that this is close enough to my build time, can't wait
03-01-2006, 03:16 PM
CrashOv3r1De

So how you guys liking the board? Stable

Is there enough room for 2x CF cards or is the layout bad like the A8n32 sli dlx
03-01-2006, 03:29 PM
althes

This should be interesting
03-01-2006, 03:37 PM
Rodzilla

Quote:

Originally Posted by CrashOv3r1De

So how you guys liking the board? Stable

Is there enough room for 2x CF cards or is the layout bad like the A8n32 sli dlx

There is more space between the 2 x16 slots now... so it should be a better fit :up:

All reviews say it's very stable on a high OC. It's a very promising board!
03-01-2006, 03:45 PM
korda

Quote:

Originally Posted by Tony

0307 Beta bios, used on the AT review I hear...

grab it here.....use and flash at own risk!!!!

Tony's the man! :banana:

Thanks. :)
03-01-2006, 04:21 PM
matt samoohi

korda how did u get ur asus i thought they were scarce its only the luanch date!
03-02-2006, 06:41 AM
korda

Quote:

Originally Posted by matt samoohi

korda how did u get ur asus i thought they were scarce its only the luanch date!

They started selling the boards a little early here. :)

If i only could figure out how to get the board stable over 300 MHz HTT. The bios Tony posted is slightly better for OC though.

Show 100 post(s) from this thread on one page