Tune up version of DFI NF4 510 bios

Printable View

Show 100 post(s) from this thread on one page

06-23-2005, 12:08 AM
Onepagebook

Tune up version of DFI NF4 510 bios

just chat with Oskar and he gave me this:
After bios update, it will show as 623

http://img295.echo.cx/img295/8907/112cx.jpg

http://oskarwu.myweb.hinet.net/dfi/b...s/510-1FIX.zip
http://oskarwu.myweb.hinet.net/dfi/b...s/510-2FIX.zip
http://oskarwu.myweb.hinet.net/dfi/b...s/510-3FIX.zip
if you feel 510 bios are better than other versions , these 3 bios are based on the 510 and fixed the following:

add dram response time fastest and fixed the program vdimm after ac off.

any problem please reply here, about the 618, he will have some fix as well. stay tune.
06-23-2005, 12:25 AM
Tirlista

I will try this tonight after work, as the 618 (-2 & -3) were not working too well with my setup, were as 510-2 & -3 were really good.

Have you had time to test them yet OPB?
06-23-2005, 12:27 AM
eva2000

:cool: :)
06-23-2005, 12:50 AM
NickK

I remember someone saying the 618 series of BIOS had issues with X2 compared to the 510 series. Any word on that?
06-23-2005, 01:07 AM
Zyklon5

Are these the same with the 6/23 that windwithme just posted ?
06-23-2005, 01:08 AM
TheMeatFrog

I think they are different
06-23-2005, 02:01 AM
Suma

Remind me what each number says (1, 2 or 3).
If I remember correctly 1 is general ram 2 is UTT and 3 is TCCD. Am I right?

Thanks,
Suma.
06-23-2005, 02:10 AM
HARDCORECLOCKER

:D "After bios update, it will show as 623" so I think it's the same WWM has posted.

According to the last BIOS release (618) DFI said:

-1 is for BH-5/UTT
-2 is for general
-3 is for TCCD

:toast:
06-23-2005, 02:39 AM
UnreaL

Thank You, will try now!
06-23-2005, 02:43 AM
UnreaL

Quote:

Originally Posted by HARDCORECLOCKER

:D "After bios update, it will show as 623" so I think it's the same WWM has posted.

According to the last BIOS release (618) DFI said:

-1 is for BH-5/UTT
-2 is for general
-3 is for TCCD

:toast:

Nah they said:
-1 is for BH-5
-2 is for CH-5/UTT
-3 is for TCCD

Well thats what I read :rolleyes:
06-23-2005, 02:59 AM
Suma

Quote:

Originally Posted by UnreaL

Nah they said:
-1 is for BH-5
-2 is for CH-5/UTT
-3 is for TCCD

Well thats what I read :rolleyes:

Quote:

Originally Posted by HARDCORECLOCKER

:D "After bios update, it will show as 623" so I think it's the same WWM has posted.

According to the last BIOS release (618) DFI said:

-1 is for BH-5/UTT
-2 is for general
-3 is for TCCD

:toast:

Well, both of you says that -3 is TCCD which is what I need.
Anyway thanks :)

Suma.
06-23-2005, 03:00 AM
Huigie

Damn, who can clear up this confusion for once and for all?

Oskar, maybe you can include a small read-me with the updates...?
06-23-2005, 03:27 AM
[XC]Atomicpineapple

Well Ive just flashed to the -2 version, from 618-2, and my 11x multi now works, before I had to do 371x7 to get 2.6GHz at 1.45 volts (actual, BIOS was set to 1.5), now 236x11 works at the same voltage, before it wouldnt even POST!
06-23-2005, 03:48 AM
NiCKE^

Updated www.dfi-bios.tk with these new bios's.
06-23-2005, 04:00 AM
HARDCORECLOCKER

Quote:

Originally Posted by NiCKE^

Updated www.dfi-bios.tk with this new bios's.

:D THX NICKE^ !!! :banana:

Found this on NICKE^'s hp: "All bioses from 5.09 and later are optimized like this, TCC* = Orange slots and BH-5,UTT = Yellow slots"

Never heard about - still on the orange ones with my BH-5.

Anyone with some further informations? :confused:

:toast:
06-23-2005, 04:09 AM
NiCKE^

Quote:

Originally Posted by RGone

-1 uses 3.26 ram table
-2 uses 3.16 ram table
-3 uses 3.10 ram table

That is correct from a msnm conversation with Oskar.

Ok a couple of other points you might want to know and consider.

3/10 ram table limits you to 'two' stick dual channel to Orange slots still.

Since the 3/16/05 bios sticks could go into Yellow or Orange slots and NOT have warning to place sticks in Orange slots. This means bios with ram tables 3/16 and 3/26 can have two stick dual channel in either Yellow or Orange slots.

Now knowing that you should be able to take advantage of this feature for "however much" you find it worth.
Yellow slots 1 and 3 are supposed better suited for HI voltage and therefore UTT/BH-5 types of memory.
Orange slots 2 and 4 are supposed better suited for normal lower voltages and therefore TCCD/TCCC/TCC5 types of memory.

RGone...

This is a quote from a moderator at DFI-Street which spoke with Oscar over msn.
06-23-2005, 04:13 AM
UnreaL

Quote:

Originally Posted by HARDCORECLOCKER

:D THX NICKE^ !!! :banana:

Found this on NICKE^'s hp: "All bioses from 5.09 and later are optimized like this, TCC* = Orange slots and BH-5,UTT = Yellow slots"

Never heard about - still on the orange ones with my BH-5.

Anyone with some further informations? :confused:

:toast:

Angry_Games said over at dfi-street that all high voltage (bh-5 + utt) should be in yellow slots. Orange for lower voltage stuff.

He said this when they advised everyone not to use the 4v jumper setting IIRC.

*bah I cant see it on forum, but I remember one of admin saying it over there...*

Hope this helps!
06-23-2005, 04:21 AM
HARDCORECLOCKER

:banana: Very nice - THX again !!!

Learned again somethin' important at XS !!!

So I will give the yellows a try with my BH-5 and if there is an improvement best is that 1 GIG of MUSHKIN REDLINE 4000 is already on the way to me..., it also should like yellow then ! ;)

:toast:
06-23-2005, 04:56 AM
SVTSnake

Yellows with my Mushkin Redline XP4000's do nothing but lock up at updating DMI screen during boot. Orange works like a champ for me :D
06-23-2005, 05:04 AM
Rabidmoose171

so... which one for bh5 again? I always thought it was 2, but im seeing mixed answers here.
06-23-2005, 05:09 AM
burningrave101

Quote:

Originally Posted by HARDCORECLOCKER

:D "After bios update, it will show as 623" so I think it's the same WWM has posted.

According to the last BIOS release (618) DFI said:

-1 is for BH-5/UTT
-2 is for general
-3 is for TCCD

:toast:

I wish to heck someone could get this straight once and for all and quit switching it around lol. I mean seriously, could someone who actually knows tell us which version is optimized for what?

I thought it was like this:

-1 is for general
-2 is for BH-5/CH-5/UTT
-3 is for TCCD

I know OCZ reps seem to always recommend -3 for TCCD based modules but AG over at DFI-Street recommends -2 for TCCD modules cause he says it works best for him. I have BH-5 myself and i dont know which one would be best so i just been using the -2 version BIOS's but if their switching it around with the new 618's then i'm clueless.

What BIOS would you recommend Onepagebook? I have a 3200+ Venice and the new G.Skill 1GBGH UTT-BH.
06-23-2005, 05:24 AM
xgman

Is the USB keyboard problem fixed in the 510 refresh?
06-23-2005, 05:24 AM
ben805

Mushkin recommended 510-2 and that's what they have been using to test the Redline on, therefore I'm going to stick with -2 version for UTT :D :D
06-23-2005, 05:29 AM
HARDCORECLOCKER

Quote:

Originally Posted by SVTSnake

Yellows with my Mushkin Redline XP4000's do nothing but lock up at updating DMI screen during boot. Orange works like a champ for me :D

:confused: Taken from #16: "Since the 3/16/05 bios sticks could go into Yellow or Orange slots and NOT have warning to place sticks in Orange slots. This means bios with ram tables 3/16 and 3/26 can have two stick dual channel in either Yellow or Orange slots."

Maybe You're on the wrong BIOS or ramtable ???

:toast:
06-23-2005, 06:06 AM
Onepagebook

Quote:

Originally Posted by HARDCORECLOCKER

:D "After bios update, it will show as 623" so I think it's the same WWM has posted.

According to the last BIOS release (618) DFI said:

-1 is for BH-5/UTT
-2 is for general
-3 is for TCCD

:toast:

NO , different

Show 100 post(s) from this thread on one page