Very important DFI NF4 series Beta BIOS

Printable View

Show 100 post(s) from this thread on one page

04-13-2005, 07:51 PM
Onepagebook

Very important DFI NF4 series Beta BIOS

Not posted on the DFI yet.
As usual, Tccd for 414-1 and 3
UTT type for 441-2 or 3

414-1

414-2

414-3

******************************
Add support for AMD Venice , San Diego Core cpu Cool n quiet

prevent Jp 17 jumper problem cause vdimm still stay at over 3.3v when jp17 set back to 1-2.
DFI recommand cumstomer need to set to 3.3v AND clear CMOS before set the jp17 back to 1-2 default position.
04-13-2005, 07:57 PM
Jesse71

Thanks you, Onepagebook :)
04-13-2005, 08:13 PM
S0nic

thanks OPB :)
I hope these new ones will help me overclock my TCCD further..
04-13-2005, 08:16 PM
chunkylover77

What does that mean adds support for venice? I have been using a venice with the stock bios and all the other bios's. Weird.But thanks for the info OPB
Edit: I searched but could not find this info. What would be the best bios for 3700eb? Anyone know?
04-13-2005, 08:43 PM
Tibu

Sorry to go off topic but, does this mean that Venice won't work with the nforce 3 ultra chipset? As in an MSi Neo 2?
04-13-2005, 08:57 PM
conrad.maranan

Quote:

Originally Posted by Tibu

Sorry to go off topic but, does this mean that Venice won't work with the nforce 3 ultra chipset? As in an MSi Neo 2?

Read the very first post in this thread and see if you notice anything. ;)
04-13-2005, 09:12 PM
TEDY

UTT type meaning AA4T and 1A4T ??
04-13-2005, 09:20 PM
MadMikeSS

W00t, downloaded... will be ready for venice
04-13-2005, 09:31 PM
Tibu

Quote:

Originally Posted by conrad.maranan

Read the very first post in this thread and see if you notice anything. ;)

I've just been :owned:

:doh:
04-13-2005, 09:35 PM
TheMeatFrog

What Dram ram drive strength are you guys using with this bios with TCCD 440 chips?
04-13-2005, 09:51 PM
Onepagebook

Quote:

Originally Posted by TheMeatFrog

What Dram ram drive strength are you guys using with this bios with TCCD 440 chips?

I always use 8 for 2x512, 7 for 2x256 :)
04-13-2005, 10:27 PM
MadMikeSS

I'm using 7, settings mentioned in the thread in Xtreme Bandwidth for G.Skill DDR600. Seems to work fine for me.
04-13-2005, 10:55 PM
HARDCORECLOCKER

Quote:

Originally Posted by Onepagebook

Not posted on the DFI yet.
As usual, Tccd for 414-1 and 3
UTT type for 441-2 or 3

414-1

414-2

414-3

******************************
Add support for AMD Venice , San Diego Core cpu Cool n quiet

prevent Jp 17 jumper problem cause vdimm still stay at over 3.3v when jp17 set back to 1-2.
DFI recommand cumstomer need to set to 3.3v AND clear CMOS before set the jp17 back to 1-2 default position.

:D Recommended for FX-57............? :p:

Now I know what killed my BIOS chip..., THX !!!
:toast:
04-13-2005, 11:08 PM
Mastakilla

lol

i really love those DFI dewds their english....

cumstomers :D

thx 4 the new bios, but as usual ill wait for the next final!
04-13-2005, 11:46 PM
Minnyboy

OPB or anyone else that's tried....

What is the best of these bioses for the VX4000/BH5 RAM??

I'm hoping to get my VX to be stable in my DFI rig at 2-3-3-8@3.3v...

Been having one h3ll of a time with these 2 sticks of mine...

Enough Off Topic...

So, is the 414-2 & 414-3 the best for UTT & would that also mean that that VX & BH5 would also be classed as UTT??

Right now I have my vDimm set at 3.2v cos if I have it set any higher, my rig just shuts off :mad:

Cheers,
Minnyboy
Downloading atm...
04-14-2005, 01:14 AM
M8tRiX

TCCD DRAM Drive strenght

Quote:

Originally Posted by Onepagebook

I always use 8 for 2x512, 7 for 2x256 :)

I have GSkill PC3200/4400 LC 2 512 TCCD 431 chips i belive.

What should my DRAM Drive Strength be for these chips ?

System Spec:

1 x FX55 WEEK 45
2 x GSKILL PC3200/4400 LC
1 x DFI NF4 SLI-DR

Also are there any performance increases apart from adding Venice support

Many Thanks,

M8tRiX :banana:
04-14-2005, 01:18 AM
Wingz

Quote:

Originally Posted by M8tRiX

I have GSkill PC3200/4400 LC 2 512 TCCD 431 chips i belive.

What should my DRAM Drive Strength be for these chips ?

System Spec:

1 x FX55 WEEK 45
2 x GSKILL PC3200/4400 LC
1 x DFI NF4 SLI-DR

Also are there any performance increases apart from adding Venice support

Many Thanks,

M8tRiX :banana:

Bigtoe said..

Quote:

If you are using TCCD you may want to try 3 5 or 7 as the drive settings as they usually seem to allow the modules to clock well.
04-14-2005, 01:21 AM
M8tRiX

TCCD DRAM Drive strenght

Thanks Wingz :banana:
04-14-2005, 01:32 AM
brassen

Which one should I use with VX?
04-14-2005, 01:37 AM
krampak

Hasn't VX UTT chips? so... ;)

Should I use 414-3 with my BH-5's ?
04-14-2005, 01:38 AM
dimasdw

Quote:

Originally Posted by Onepagebook

Not posted on the DFI yet.
As usual, Tccd for 414-1 and 3
UTT type for 441-2 or 3

what the diffrent betwen 414-1 and 3 for TCCD ?
:) thanks for the bios
04-14-2005, 01:47 AM
HARDCORECLOCKER

:confused: Hm, this thread is going to be a "what should I use for my xxx RAM" thread - why such a panic ?

Each user has a different system so it should be the best way everybody test it on his own - BOIS flash last only a few minutes.

I did so with the 3 versions of the 331 BIOS and found out that 331-1 is best for my BH-5.

Otherwise we have here hundereds of post what BIOS is to use in a few days......

:toast:
04-14-2005, 02:29 AM
vlad

Quote:

Originally Posted by HARDCORECLOCKER

:confused: Hm, this thread is going to be a "what should I use for my xxx RAM" thread - why such a panic ?

Each user has a different system so it should be the best way everybody test it on his own - BOIS flash last only a few minutes.

I did so with the 3 versions of the 331 BIOS and found out that 331-1 is best for my BH-5.

Otherwise we have here hundereds of post what BIOS is to use in a few days......

:toast:

Agreed! Just try'em out and find out what works best. So far 3.10 & 331-1 work good for me with tccd. Ill try the 414-1 & 3 next. ;)
04-14-2005, 02:32 AM
Der_KHAN

Quote:

Originally Posted by HARDCORECLOCKER

:confused: Hm, this thread is going to be a "what should I use for my xxx RAM" thread - why such a panic ?

Each user has a different system so it should be the best way everybody test it on his own - BOIS flash last only a few minutes.

I did so with the 3 versions of the 331 BIOS and found out that 331-1 is best for my BH-5.

Otherwise we have here hundereds of post what BIOS is to use in a few days......

:toast:

it would be helpful though, to have a sticky with recommended timings, drive strength, etc. for dfi nf4 boards in combination with different kinds of mem

or is there already one? :confused:
04-14-2005, 02:41 AM
vlad

There are already a bunch of DFI NF4 threads maybe all the info should be combined in one sticky. :2cents: :)

Show 100 post(s) from this thread on one page