HERE we go again......AMD this time...Some BH-6 action...

Just started with stock heatsink and very low frequency........Borrowed FX53 CPU.... :D

To be honnest this mobo - DFI NF4 SLI-D - is rock stable..... :D

Config. for now.....

Motherboard : DFI NF4 SLI-D
PSU : ENERMAX 550 Watts(old) - ALSO tested with the Zippy 700Watts and it was OK.....
DDR Maximizer(all the way - keeps mobo tooooo cool)...... ;)

Rams : 2 x 256MB Kingston Value Rams PC2700(DDR333) at Cas 2 - 2 - 2 - 5 and ........3.82Vdimm(so far - more to come)..... :D

3D Benchable at 287MHz 1:1....so far and climbing... ;)

EDIT: Forgot to mention.....Bios 3.10 Official


http://www.thelab.gr/images/Hipro5/A...288MHz_png.png

http://www.thelab.gr/images/Hipro5/A...88_1_1_png.png

Wow, that is some amazing speeds for PC2700 KHX BH6. Generic PCB I assume?

Any pics of the DDR Maximizer in action? ;)

anything with 1gig???

Quote:

---

Originally Posted by EnJoY

Wow, that is some amazing speeds for PC2700 KHX BH6. Generic PCB I assume?

Any pics of the DDR Maximizer in action? ;)

---

Hmmmm.........I'll take a shot for you......in a minute........I have to boot up, change the mouse and the keyboard and I'll come back...... :D

Quote:

---

Originally Posted by situman

anything with 1gig???

---

No sorry.......ALL of MY Ram modules are 256MBs - 7 of them...... :D

He,he,he..........I'm back......... :D

You asked for it...... :)

http://www.thelab.gr/images/Hipro5/A...Maxi_1_jpg.jpg

http://www.thelab.gr/images/Hipro5/A...Maxi_2_jpg.jpg

http://www.thelab.gr/images/Hipro5/A...Maxi_3_jpg.jpg

http://www.thelab.gr/images/Hipro5/A...Maxi_4_jpg.jpg

http://www.thelab.gr/images/Hipro5/A...Maxi_5_jpg.jpg

Is that the Kingston HyperX you've been sleeping with under your pillow for the last 2 years ? :D

Great results Hipro !

very nice, My BH-6 takes 285-286 without the capacitors mod

it helps or ur BH-6 are already awesome??

WOW


slot 3 = yellow slot

slot 1 = yellow
slot 2 = purple
slot 3 = yellow
slot 4 = purple

Dual ddr is possible I believe with the Slot 1 and 2 (It works), slot 2 and 4 (normal), slot 3 and 4 (yes???), slot 1 + 2 + 3 + 4 (yep)

wow :slobber: :slobber:

truely amazing, well done hipro!

I want one of those Maximizers :D

:toast:
like always :)

Thank you guys........ :)

Ram modules are in Dimm2 and Dimm4..........At Dimm3 is the DDR PCB of the DDR Maximizer........ ;)

Quote:

---

Originally Posted by Major Slaughter

Is that the Kingston HyperX you've been sleeping with under your pillow for the last 2 years ? :D

Great results Hipro !

---

Thanks.......... :)

No they are 2 x 256MB Kingston VALUE Rams.......I had bought them about 33 Euros each........ :D

Quote:

---

Originally Posted by cpulloverclock

very nice, My BH-6 takes 285-286 without the capacitors mod

it helps or ur BH-6 are already awesome??

WOW


slot 3 = yellow slot

slot 1 = yellow
slot 2 = purple
slot 3 = yellow
slot 4 = purple

Dual ddr is possible I believe with the Slot 1 and 2 (It works), slot 2 and 4 (normal), slot 3 and 4 (yes???), slot 1 + 2 + 3 + 4 (yep)

---

They are at Dimm2 and Dimm4 as for the mobo's writings......Cpu-z shows them as slot 3 and slot4.....

Looks pretty insane. What makes this better than a commercial product like the OCZ DDR booster?

FAST UPDATE......... :D

cpu-z Validation......... H E R E ........


On the Validation page, shows my Rams at slot1 and slot2......... :confused:

Quote:

---

Originally Posted by zeebs

Looks pretty insane. What makes this better than a commercial product like the OCZ DDR booster?

---

This will be a commercial product pretty soon too...... ;)

READ if not yet........

HOLY SHAT what did you feed that PC2700 to do 288MHz and where can i get a set :o

The best fsb for my BH-6 DC mode is 302 2-2-2-5 , 3000+ inside, it seems that the memory goes up more easily with a FX

why this maximizer on DFI when board itself has till 4.0 vdimm ?? :)

Quote:

---

Originally Posted by TEDY

why this maximizer on DFI when board itself has till 4.0 vdimm ?? :)

---

Coz Motherboard now is very cool......PLUS I can change the Vdimm onthefly when I bench with different fsb's, etc. ;)

Very impressive as usual Hipro. :toast:

Awesome job Master hipro :toast:

I must have to use your DDR Maximizer, coz my BH-5 can do 286MHz DC 2-2-2-3 with 3.69V but damn, I can't get over this Vdimm, I cant load windows, so I think that using you DDR Maximizer is the only way to do that...what do you think??

This is the result: 286MHz 2-2-2-3 DC

:toast:

awsome score please bench