Here might be the help for those MSI k8n neo2 users who have hard time to reach high

explain:**
please note: This bios is not publish yet!

1. Only for XS members
2. nothing to do with Gskill
3.do not publish the bios I email you
4.please do seriously compare the difference between previous and the one I will send you.
5. Try for your own risk.
6.Drop me a line (after you post your problem here) only if you really have problem regarding can't get high FSB.

** I don't know if this way is proper way to help friends here.
If I am wrong, please advise me (all the mods)

Sorry can't give a link here and bear with my broken English.

I truely hope it helps.

better keep it private ;)

Quote:

---

Originally Posted by tictac

better keep it private ;)

---

Ya that's what I mean,I will just PM or email the file only

btw..
where did you get that avatar?
that's very famous figure in our traditional Taiwanese palm drama named "Silver Fox"

Quote:

---

Originally Posted by Onepagebook

btw..
where did you get that avatar?
that's very famous figure in our traditional Taiwanese palm drama named "Silver Fox"

---

got it from Kuang Shao :toast:

Hmmm since you don't have any problem cold booting with vapo... wonder if this is it :P Can you send me a copy so I can futiley try cold boot again? :P (or were u using the stock 1.35 beta?)

Pls could you send me the bios as well....Thanks
Trying higher fsb's with Adata ddr600 and my 3500+ Winny.

i would realy like to try it out
great if u could pm me :)

Check your PM guys,

Do you know what this bios changes? Can you please send me it.

Thanks

If this fixes the cold boot issue send it my way please.


I just took down my entire mach I about an hour ago and going back to air with this combo because of this issue, what a pain in the ars. I was going to rma the chip anyway but still it's troublesome.

May I grab a copy too dont know when I will install it going away tomorrow for a couple of weeks but I will try it when I get back from hols
Thanks

im not a super member but could i grab it

Interesting... bios temp do reads way high now... but doesn't lock up (newcastle atm)
Just shipped my winne out today so I guess I will have to wait again... :P
My guess is the lockup issue is gone since board is running with "high" temp.
Shouldn't have spent the money on buying 2 sets of TCCD sigh... someone's 3ghz winnie probably is gone by the time when I am ready... -_-;

PS) Stability seems fine for now. Gonna hard test few things I couldn't.

Onepagebook, you mentioned this might help users who can't get to high FSB. I'm currently having issues with reaching even *low* FSB with my double-sided BH5 :D

If this bios might help, may I grab a copy as well?

I would really like to try it out.
Thanks.

I would like to try it out too. Thanks

one here too please onepagebook!
Im doing some tests right now for max settings and after that (probably next week)
ill post new findings.

Thanks

I would like to try it also please.

I'll have one as well please Onepagebook.

My problem.
I seem to hit a wall with OCZ EB.


Splits mail

oh #hit

on one hand i would be really pleased if this fixed the Mach2 issues, but on the other i just sold my Neo2 so i don't wanna have to buy another one :rolleyes:

can someone confirm this bios fixes the booting / freezing cold temp issue?

I'm having problems overklocking my 3500+ NC.
It´s only stable at 2450MHz in prime95.
This bios might help me a lot with stability and higher FSB.

Edit: My email: turhezz@spray.se

//turez

Isn't that what a bios savior is for? (Also got LOTS of spare bios chips) :D . Heck hot flashed 1.3b6 in a vnf-250 B4 I got my winnie, still using it!

Stuck @ aroud 270-275 using 2 diff winnies and 4 diff TCCD sticks (2 pqi + 2 Gskill) :bsod: :brick:

BIOS PLEASE! :slobber: :hehe: Thanks MikeE

Id like a copy too ;)

Quote:

---

Originally Posted by mad mikee

Stuck @ aroud 270-275 using 2 diff winnies and 4 diff TCCD sticks (2 pqi + 2 Gskill) :bsod: :brick:

---

Same here. Send it to me also please :).

ditto, thanks Onepagebook . . .