k-ohashi Pentium-M LN2 is cooling25 second, ID3.3G

Printable View

Show 100 post(s) from this thread on one page

10-30-2004, 05:38 PM
sxs112

k-ohashi Pentium-M LN2 is cooling25 second, ID3.3G

測試配備
M/B: AOpen i855GMEm-LFS / BIOS: R1.01
CPU: Pentium M 755 SL7EM/7416A480
CPU Cooling: LN2
Chipset Cooling:
Memory: SanMax BH-5(339WF)B-V 512MB x1
VGA: GeForce2GTS(AGP)
HDD: IBM DTLA-307015
Power Supply: Zippy-460WS
Vcore: 1.424V
Vddr: 3.198V, Vio: 3.521V
OS: Windows Server 2003 Enterprise
MEM: CL2-5-2-2, 400/266/133/267 MHz設定(3:4)
edit: DDR-BOOSTER use

http://219.113.251.125/c-board/file/...N2_PI-yaki.jpg
LN2

http://219.113.251.125/c-board/file/...213.55_x18.png
3213Mhz run 25s

http://219.113.251.125/c-board/file/...302MHz_x20.png
CPU 3.3G

source
10-30-2004, 05:47 PM
Charles Wirth

I see an OCZ DDR booster!

I need a desktop board...

Dothan showing some muscle :)
10-30-2004, 06:14 PM
I²K

I said it a year ago...

Athlon pro MHz Power combined with Intels ocing Power = Pentium-M Power :-)
10-31-2004, 05:29 AM
Mathias-K

Impressive! What would the temperature be @ only 1.4xV? Couldn't you do those volts on high end water / phase change?
10-31-2004, 08:49 AM
Jeff

Quote:

Originally Posted by IÂ²K

I said it a year ago...

Athlon pro MHz Power combined with Intels ocing Power = Pentium-M Power :-)

And I've been saying it since I received my 1.5GHz Dothan notebook a few months back. After running a 51s SuperPi at the stock 1.5GHz... you knew these chips would be good if they scaled... and they do. ;)
10-31-2004, 09:38 AM
Siphilon

Quote:

Originally Posted by FUGGER

I see an OCZ DDR booster!

I need a desktop board...

Dothan showing some muscle :)

I hear the desktop boards should be available in the U.S. fairly soon :toast:

Keep your eyes open and ill do the same...once ive secured one I will pass on the info :p:
10-31-2004, 09:57 AM
saaya

*opens his pentium M adapter folder and starts the pcb design program*

:D
10-31-2004, 10:46 AM
Siphilon

Quote:

Originally Posted by saaya

*opens his pentium M adapter folder and starts the pcb design program*

:D

haha...even better! do you need any venture capital? :p:
10-31-2004, 02:22 PM
caater

i'm wondering if it's doable.. though test-phase needs 478 wires to be soldered :D
and i'm wondering what will IC7 think of p-m.. :confused:

/me starts dl'ing and comparing p4 and p-m specsheets

Quote:

Originally Posted by saaya

*opens his pentium M adapter folder and starts the pcb design program*

:D
10-31-2004, 02:58 PM
saaya

dont need any capital, pcbexpress is sponsoring me :D i get the pcb for free :D
all i need is two dead 478 boards so i can use the sockets for an adapter, thats it...

and caater, im still looking for a place that can solder the parts together for me, but i think i found a place :)
10-31-2004, 04:01 PM
Siphilon

Quote:

Originally Posted by saaya

dont need any capital, pcbexpress is sponsoring me :D i get the pcb for free :D
all i need is two dead 478 boards so i can use the sockets for an adapter, thats it...

and caater, im still looking for a place that can solder the parts together for me, but i think i found a place :)

hrmmm do you need the actual pins from the socket as well? I remember ripping apart a bad board once and using the socket as a pin straightener (at the time I had dozens of chips that I needed to straighten for someone...long story).

Anyway, I know when I ripped the socket from the board the actual contacts remained w/ the pcb...

lmk
10-31-2004, 04:28 PM
caater

another interesting note - it seems that pci/agp lock is missing? :o
10-31-2004, 04:47 PM
Siphilon

Quote:

Originally Posted by caater

another interesting note - it seems that pci/agp lock is missing? :o

can we focus on the positives here ! :D
10-31-2004, 05:16 PM
grimREEFER

Quote:

Originally Posted by saaya

dont need any capital, pcbexpress is sponsoring me :D i get the pcb for free :D
all i need is two dead 478 boards so i can use the sockets for an adapter, thats it...

and caater, im still looking for a place that can solder the parts together for me, but i think i found a place :)

have u tried getting support from abit.....
u would make them and yourself milliones if u could get it to work
10-31-2004, 08:24 PM
kyosen

Hello, I'm k-ohashi as known as kyosen :cool:
Thanks for your interest to my OC result!
...and thanks especially to sxs112 for beginning new threads:)

> another interesting note - it seems that pci/agp lock is missing? :o
--
AGP/PCI lock is available on AOpen i855GMEm-LFS!
I simply want AGP clock for 3DMark etc. and also want to show
robustness for higher AGP/PCI clock of this motherboard ;)

I'll try LN2 cooling again...in FSB/mem=3:5mode.
10-31-2004, 09:49 PM
caater

Quote:

Originally Posted by kyosen

Hello, I'm k-ohashi as known as kyosen :cool:
Thanks for your interest to my OC result!
...and thanks especially to sxs112 for beginning new threads:)

> another interesting note - it seems that pci/agp lock is missing? :o
--
AGP/PCI lock is available on AOpen i855GMEm-LFS!
I simply want AGP clock for 3DMark etc. and also want to show
robustness for higher AGP/PCI clock of this motherboard ;)

I'll try LN2 cooling again...in FSB/mem=3:5mode.

Oh, nice to see you here.. good job on that mobile :)
btw, is dothan more low temperature tolerant than prescott?
afaik prescott hangs if temp goes lower than ~150C...

And.. try to get x800 for 2001se goodness :D
10-31-2004, 10:48 PM
crotale

Is it only me, or does the Dothan scale bad?
At around 2.5GHz they own A64/FX clock/clock.
But now, "only" 25 seconds at 3.2GHz.
(FX 3.35GHz = 24 sec)

Impressive results! I just hope to see some DC boards coming out.
11-01-2004, 12:30 AM
Denniscooldelux

has that bord a agp pci fix? 119agp and 59pci is to many for the mÃ³st pci devices and for the most videocards.
11-01-2004, 02:02 AM
kyosen

Quote:

Originally Posted by Denniscooldelux

has that bord a agp pci fix? 119agp and 59pci is to many for the mÃ³st pci devices and for the most videocards.

Yes, this board has AGP/PCI clock option in its BIOS,
which is selectable from 66/33, 75.43/37.72, 88.00/44.00,
and we have to set 75.43/37.72 or 88.00/44.00 for fixing AGP/PCI clock.
If we choose 66/33 setting, it behaves synchronous in case of using
AOpen's clock-mod soft.
Now Mr. abo's SetFSB is also available for modding clock ;)
11-01-2004, 02:12 AM
Denniscooldelux

:toast: :slobber: perfekt. :slobber: anybody know where to buy dothan for low money? in germany the prices are to high i think.
11-01-2004, 02:37 AM
caater

Quote:

Originally Posted by Denniscooldelux

:toast: :slobber: perfekt. :slobber: anybody know where to buy dothan for low money? in germany the prices are to high i think.

try eBay.. i've seen 1M p-M's going there for like $50 and 1.5-1.6ghz dothans for ~$150.

kyosen/k-ohashi, how about a nice max-fsb stress-test? :toast:
11-01-2004, 03:13 AM
kiko

Quote:

Originally Posted by kyosen

Hello, I'm k-ohashi as known as kyosen :cool:
Thanks for your interest to my OC result!
...and thanks especially to sxs112 for beginning new threads:)

> another interesting note - it seems that pci/agp lock is missing? :o
--
AGP/PCI lock is available on AOpen i855GMEm-LFS!
I simply want AGP clock for 3DMark etc. and also want to show
robustness for higher AGP/PCI clock of this motherboard ;)

I'll try LN2 cooling again...in FSB/mem=3:5mode.

hi kyosen i am waiting for this board and i would like to know if is possible to use 3:5 beyond 133 FSB and if 237/238 is the limit of your ram at 3.2v.
10x (thanks)

Ciao
11-01-2004, 09:00 AM
jan

Quote:

Originally Posted by kyosen

Now Mr. abo's SetFSB is also available for modding clock ;)

would you post a link to this setfsb? i should get the board in a few days. :)
11-01-2004, 09:11 AM
Siphilon

Quote:

Originally Posted by jan

would you post a link to this setfsb? i should get the board in a few days. :)

http://www13.plala.or.jp/setfsb/
11-01-2004, 09:26 AM
jan

thx :)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 11:54 PM.

XtremeSystems