Post here if you tried it. Looks like it worked for me, trying to test now
Instrructions http://forums.guru3d.com/showthread.php?t=335318
http://gpuz.techpowerup.com/10/12/26/avh.png
^That is a 6950!
0.9v idle
1.175 load
Printable View
Post here if you tried it. Looks like it worked for me, trying to test now
Instrructions http://forums.guru3d.com/showthread.php?t=335318
http://gpuz.techpowerup.com/10/12/26/avh.png
^That is a 6950!
0.9v idle
1.175 load
wow this is awesome! congrats your chip is golden :)
Very interested on seeing if more of these cards can unlock successfully.
Isn't Device ID # wrong ? 6970 should be 1002-6718 and 6950 1002-6719.. it would be better to see before-after performance results at same frequencies..
Can you please post the exact make and model of your 6950, also lets see some results if you can to see if theres a difference.Quote:
Originally Posted by Bodkin
I have an HIS 6950 in the mail so I can test this out once it arrives. Does this mean that the 6950 is just a crippled 6970?Quote:
Originally Posted by Rattle
Will this work with a Sapphire 6950?
Old 3d mark score was x1100
New 3d mark score is x1789
Clocks are the same, as far as I can tell it works, seems there is no laser cut
Its a HIS 6950
Should've post this here - http://www.xtremesystems.org/forums/...&postcount=750
Btw guys, i get artifacting in ati tool scanner, quite badly. But in all the benchmarks i've run i haven't seen any :confused:
My 6950 never artifacted in the scanner. I tried lower clocks, 6950 speeds, still artifacted. But i haven't seen any in game :shrug:
Artifacts in 3D mode for me.
powercolor 2 cards.
Getting artifacts too, but the card flys along in game :S
When are you getting atifacts?Quote:
Originally Posted by Bodkin
Did you put your switch on position 2 to keep the original bios?
Only getting artifacts on atitool 3d scanner, nothing else, furmark is fine. Bios 2 is the backup so flashed bios 1
What about GPUTool stability test? Could you please test with GPUTool?Quote:
Originally Posted by Bodkin
Run for 5 mins so far, seems fine!
15 min mark and its still not artifacting
That's great! Thank you! :clap:Quote:
Originally Posted by Bodkin
NICE
I just ordered a 6950
I have no self control rofl
I flash my sapphire 6950 and it worked gained about 100pts in 3dmark11 clock for clock
Any artifacts? :D
Thats not alotQuote:
Originally Posted by Alucard-
30 mins in and still nothing :)
Yah that scale closed with my running on 3dmark 11 too about 100pts, looking to approve for all :up:Quote:
Originally Posted by Alucard-
Ran it for a good 10-15 minutes as well, no artifacting. I remember it being a good tool to test my 4890 core with, but same with ati tool :shrug: gpu tool tester is hotter though, more on terms with furmark etc.
http://paulyd.co.uk/oz/6970%20gputool.jpg
Some more benches here: http://www.xtremesystems.org/forums/...&postcount=758
rofl! i've already put the card in the shopping cart (232,99€, from powercolor), but didn't check out yet. artifacting with the atitools artifact scanner doesn't sound too good :(Quote:
Originally Posted by Rattle