just ordered a 1055T, and my mobo isnt supported, shopping time, want input

ok so shockingly the K9A2 CF which has a better chance of starting a fire than running any kind of OC, got support for X6 cpus, but the K9A2 Plat got nothing, (and checking bioses, the last one for my board was in september, and the CF had 3 since then, shocking how little they care about one of their best original 790FX boards)

so im looking for something that can hold 2 gpus, toggle turbo, and has decent controls for volts, and NB/HTT multis (my current board does not have independent multi control and it sucks with the NB is the limiting factor and i cant touch it)

also im gonna need some ram (2x2GB) something decent, no way do i need the best

budget is 150$ for the board, but cheaper is better
ram, 130$ limit, but again, cheaper is better

thanks for the help guys, i havnt been able to keep up with everything since i havnt had to buy a new board for years, and looks like i have to get something now, and hopefully something i can drop a BD into later

sofar im looking at

Asus M4A89GTD Pro (non usb3)
OCZ Fatal1ty 1333mhz

total is 260$ before 20$ tiger direct rebate, and 32$ cash back from bing
think it looks good? or can i do better?

Quote:

---

Originally Posted by Manicdan

sofar im looking at

Asus M4A89GTD Pro (non usb3)
OCZ Fatal1ty 1333mhz

total is 260$ before 20$ tiger direct rebate, and 32$ cash back from bing
think it looks good? or can i do better?

---

This should be good.
I've seen couple of nice OC on that mobo already, so this shouldn't be an issue.
1600MHz RAM would be better to feed 6 cores, but there is a chance you can squeeze some more of that OCZ kit.

I've got 2GHz G.Skills for my build
http://www.newegg.com/Product/Produc...-281-_-Product
Not the best RAM for AMD but good price/perf and who knows how it will really fare on Thuban.

Quote:

---

Originally Posted by Lightman

This should be good.
I've seen couple of nice OC on that mobo already, so this shouldn't be an issue.
1600MHz RAM would be better to feed 6 cores, but there is a chance you can squeeze some more of that OCZ kit.

I've got 2GHz G.Skills for my build
http://www.newegg.com/Product/Produc...-281-_-Product
Not the best RAM for AMD but good price/perf and who knows how it will really fare on Thuban.

---

thanks, for the price they are incredible, i know alot of ram can be pushed alot with a slight voltage increase.

btw what does happen if my motherboard dosnt support it, do i just have to set the frequency manually, or will it flat out not work?

Now THAT is a good deal for ram.

I'd be curious to buy that just because it's only a slight jump in price and you really won't have issues in the future if you need something faster than 1600. :up:

If you have an asus board, it'll match too.

These are what I use
http://www.newegg.com/Product/Produc...-440-_-Product
Little higher in price $140
But they do
1333 @ 66616
1666 @ 77719
1866 @ 88822

Quote:

---

Originally Posted by Manicdan

ok so shockingly the K9A2 CF which has a better chance of starting a fire than running any kind of OC, got support for X6 cpus, but the K9A2 Plat got nothing

---

So after actually reading what you wrote.... I realized.... I asked MSI this question....

Will there be x6 support? Here's what I got as a response....

Quote:

---

Dear Charles,

Thank you for contacting MSI Technical Support. Regarding your concern, there will be bios update for new Phenom II x6 processor in the future, so please refer to MSI website to get bios update later.
bios
Thanks for your cooperation in advance!

Best regards,
MSI Technical Support Team

---

This is good news, BUT I don't know what the max bus speed is on this mobo (I can only get 250mhz stable) and if it won't even approach 285 b/c it we are both mobo limited, x6 will not be a good chip for us and moving to 890fx is more realistic.

it almost sounds like a generalized answer, ive seen 2 people ask on their forum and both just said, sorry nope. never mention of future support, or listing that board directly

when u sent the question, was it directly in regard to the Plat? or just for generalized support? and how long ago did you ask?

check g.skill flare.. i dont know if it gets fast in stock enough :(

http://www.techpowerup.com/120785/G...._Platform.html

G.skill Eco otherwise?

Quote:

---

Originally Posted by Manicdan

thanks, for the price they are incredible, i know alot of ram can be pushed alot with a slight voltage increase.

btw what does happen if my motherboard dosnt support it, do i just have to set the frequency manually, or will it flat out not work?

---

Every DIMM has several SPD timings and frequency tables written to it. So for instance 2GHz module will have:
1. 2000MHz 9-9-9 1.6V
2. 1833MHz 9-9-9 1.5V
3. 1600MHz 8-8-8 1.5V
4. 1333MHz 7-7-7 1.5V

If your mobo/CPU officially supports only 1333MHz DDR3 (most CPU's on market from both Intel and AMD) then that value will be used as default. Better motherboards will try and look for highest supported timing/voltage combination. All in all this means it should boot even on motherboards with only DDR3 1333MHz support.

Quote:

---

Originally Posted by Lightman

Every DIMM has several SPD timings and frequency tables written to it. So for instance 2GHz module will have:
1. 2000MHz 9-9-9 1.6V
2. 1833MHz 9-9-9 1.5V
3. 1600MHz 8-8-8 1.5V
4. 1333MHz 7-7-7 1.5V

If your mobo/CPU officially supports only 1333MHz DDR3 (most CPU's on market from both Intel and AMD) then that value will be used as default. Better motherboards will try and look for highest supported timing/voltage combination. All in all this means it should boot even on motherboards with only DDR3 1333MHz support.

---

was talking about the cpu. i know most ram has weird profiles like that

Quote:

---

Originally Posted by Tomasis

check g.skill flare.. i dont know if it gets fast in stock enough :(

http://www.techpowerup.com/120785/G...._Platform.html

G.skill Eco otherwise?

---

Flair has an awesome heatsink. :up:

The Eco are nice too, although I don't really know how much power they safe in the real world. The silver heatsink is a nice change as well.

Good kits overall by the look of it.

Quote:

---

Originally Posted by [XC] Synthetickiller

So after actually reading what you wrote.... I realized.... I asked MSI this question....

Will there be x6 support? Here's what I got as a response....




This is good news, BUT I don't know what the max bus speed is on this mobo (I can only get 250mhz stable) and if it won't even approach 285 b/c it we are both mobo limited, x6 will not be a good chip for us and moving to 890fx is more realistic.

---

i used to have issues with my board hitting 250. turns out if i turn it from trfc 90 to 110 it helps alot. plus run ur ht voltage up at like 1.275ish. currently running 290 fsb on a 50$ board. i could run 300 ( max in bios btw ) but my ram don't like it too much. but that's fine.

Quote:

---

Originally Posted by Tomasis

check g.skill flare.. i dont know if it gets fast in stock enough :(

---

Here's a guy testing Flares:
http://www.coolaler.com/showthread.php?t=237083
:cool:

Quote:

---

Originally Posted by cezar

Here's a guy testing Flares:
http://www.coolaler.com/showthread.php?t=237083
:cool:

---

wow they really are getting 1000mhz at 1.65v, thats impressive enough right there.

however its at 2t, how bad is that for DDR3?

so heres the pros and cons, if i keep my current motherboard, i have ddr2 using up more power for probably +30% performance loss (on the ram, not sure about real life) and i dont know if i will be able to access those extra multipliers up to x16, so ill be stuck at x14 (which i dont think will be a very big deal since i should be ok with 3.6ghz base, and turbo around 4.2)

whats the expected price for those flares? over 150$ might not be worth it

2t is more or less a restriction on the cpu's imc. u probably can run 1t with no issues, unless the imc is weak and u have all 4 dimms populated then u might have to run 2t ...

yeah the simple rule is 4 dimms means 2t, 2 dimms is 1t, but im not sure how much of a perf hit comes with that. im kinda stuck right now, my first 2 sticks i bough in early 08, 1GB each, so then i bought 2 more for 35$ (freaking awesome, lol) so i have 4GB, but with 2t timings, and i think that might only loose 5-10% of the everest memory benchmark test

does anyone still know what i can expect if i try to put the 1055T into my motherboard, even though it supports C3 chips, but not X6 chips? its due to arrive tomorrow, so i will find out, but id rather have an idea before i force it in

well theres a 50/50 chance it will work... either it will or it wont :p:

It may boot and you'd have to manually set the voltages/settings etc... or it wont boot :P.

Cheap DDR3 set:
http://www.newegg.com/Product/Produc...82E16820231277

Quote:

---

Originally Posted by Manicdan

yeah the simple rule is 4 dimms means 2t, 2 dimms is 1t, but im not sure how much of a perf hit comes with that. im kinda stuck right now, my first 2 sticks i bough in early 08, 1GB each, so then i bought 2 more for 35$ (freaking awesome, lol) so i have 4GB, but with 2t timings, and i think that might only loose 5-10% of the everest memory benchmark test

does anyone still know what i can expect if i try to put the 1055T into my motherboard, even though it supports C3 chips, but not X6 chips? its due to arrive tomorrow, so i will find out, but id rather have an idea before i force it in

---

im running four dimm at 1t :p: maybe im lucky :D im also running 90ns instead of 110.

maybe I should run everest benchmark?


with recent memory purchase I jumped largely from 2g to 8gb :) huuge difference especially when I run several adobe apps.

Quote:

---

Originally Posted by Manicdan

was talking about the cpu. i know most ram has weird profiles like that

---

:doh:
Now I get it ...

I extracted the CPU patch data from the 790FX-GD70 and added it to the K9A2 Platinum 1.9 BIOS:
http://sites.google.com/site/apokalipse/7376v19.7z

will that actually work? and if it was so easy, why didnt msi do it?
(please dont blow up my pc, ill test it tomorrow after i see what happens when i use just 1.9 stock)

Don't know for sure, though I only added data to it, so I would think so.
I used MMTool to do it.

As to why MSI hasn't done it yet? I don't know. Maybe they just want you to upgrade?

well sofar using bios 1.9 on the k9a2 plat for a 1055T lets you get into the bios, but letting it load after that only shows a blinking cursor on a black screen and nothing happens

interestingly enough, i had access to multiples up to 16.5x.

i might try the flash, but i havnt done that the right way in so freaking long, and i dont have a floppy, or blank cds, and i lost my thumb drive