Supermicro SuperServer 7046GT-TRF; The Ultimate Workstation

Recently I had the opportunity to spend 2 weeks evaluating this system.
It arrived at my home in what can only be described as “one huge box” that weighed in at 82lbs and was
27”x13”x38” in size.
After getting over the shock of the size of the box and opening it you start to understand why it needs this size shipping box. The case is in a fitted foam container protected in every direction and the case itself is far from small. In fact it’s the deepest case I’ve run into ever.
Case dimensions are 18.25”Hx7”Wx27.25”D
Inside the box are the following:
Case with preinstalled SM X8DTG-QF motherboard
2 boxes with heat sinks inside
A box with 2 power cords, the cdr with all the drivers, a bag of asst screws and 2 keys for the lockable front faceplate.
Attachment 102294
Attachment 102295
Attachment 102296
Next I started to take a close look at the construction and the best way to describe this is that Supermicro seemed to have told a group of engineer’s to “make the best possible and use nothing but the best in parts.
Everything is top end on this from the steel used to make the case to the fans to the excellent job done with the wiring and layout.
Panels fit perfectly and the black painted finish is excellent quality.
Behind the drives and before the motherboard area is a bracket with 4-92x38mm San Ace fans and at the back of the case are 2-80x38mm exhaust fans
All six of these are hot swappable and with a simple push of the lever they come out easily.
Behind the drive area is a SAS/SATA backplane with SES2 support for up to 6 hot swappable drives in removable cages.
There are also two 5.25” bays and one 3.5” fixed bay.
Attachment 102297Attachment 102298
Attachment 102299Attachment 102300
Then we come to the motherboard and what an incredible piece this is.
It’s a Supermicro X8DTG-QF and if it’s missing any features I’ll be darned if I can find one.
When you see the board you’ll understand why the case is as deep as it is.
The board itself is app 15” tall by 13” wide.
It has every feature one could ask for.
4-PCI-e X16 slots
2-PCI-e x4 in x16 slots
1-PCI-e x4 in a x8 slot
2-pci 33mhz slots
DUAL Intel 5520 chipset and that’s 72 pci lanes available versus the normal 36 so it is possible to run up to 4 video cards with each receiving a x16 signal
12-DDR3 DIMM slots capable of up to 192 gig total

Next we come to the power supply or should I say power supplies.
2-1400w 80 PLUS Gold Certified units that are hot swappable.
These have an efficiency rating of 93%.
Like all the other parts, removing and replacing is a breeze with just a lever to activate.
1100w on 110 power here in the USA and 92A on the +12 line.
1400w for you folks on 240v power.
Enough to do anything you want and then some.
Also worth mentioning here is the leads from the PSU.
Everything is well thought out and all the additional power leads you will need for your vid cards are already in place waiting to be connected.
Attachment 102306Attachment 102307
A little bit on the heat sinks that are included.
Most companies when they do include heat sinks which isn’t common include what could be best described as “CHEAPIES”
I don’t know who made these but they look very much like the Thermalright Ultra 120’s except of better quality in fit and finish using 92x38mm fans vs the ThermalRight’s 120x25mm fans.
Attachment 102308Attachment 102309
Last thoughts;
I always try and look at things with a clear and open mind.
If I see flaws in a piece of equipment I do mention them to the manufacturer but honestly, I can’t find any flaws in this design.
Everything and I mean everything is made of the highest quality.
You couldn’t ask for better.
It is expensive in todays world but not really when you break it down and see what you’re getting for that money.
The case is built like a tank and should provide years of service.
Those power supplies are worth their weight in gold.
The board by itself is one hell of a good design with every feature one could ask for.
Put this all together in one package and your getting excellent value for the money spent.
I did run some benchmarks with this system but they were with cpu’s that are still under NDA .
I can say this, you won’t be disappointed.
More info can be found here for the system:
http://www.supermicro.com/products/s...7046GT-TRF.cfm
An old line crossed my mind while spending time just looking at how this was all put together:
“A thing of beauty is a joy forever” and that fits so well here.
You’ll still be enjoying the system long after you’ve forgotten the money spent for it.
I’d like to thank Doug Herz from Supermicro for the loan of this system.
Thanks for reading.
Dave Hunt
Movieman at XtremeSystems forum

Hot Damn Dave! This machine is a freaking beast - I love it!

Quote:

---

Originally Posted by TheGoat Eater

Hot Damn Dave! This machine is a freaking beast - I love it!

---

I did too.. Trust me when I say I did NOT want to send it back.
Actually tried to buy it from them! Beautiful design and great quality.

I am assuming this is a x58 board? What chips are you using? Any overclocking available? Also, how loud is it? How is the heatsink on the chipsets? Good or bad?

Quote:

---

Originally Posted by Utnorris

I am assuming this is a x58 board? What chips are you using? Any overclocking available? Also, how loud is it? How is the heatsink on the chipsets? Good or bad?

---

dual socket 1366, dual 5520 chipset
chips used during test were my X5680's at 3330/3458 on turbo
No overclocking available. Sound levels weren't bad, not dead quiet but not bad at all.
Heatsink really surprised me, within 1-2C of my TRUE's with same chips on another board.
Didn't add in any performance figures as I wrote this and planned it to post before the NDA ended on the westmere's but then got caught up in the W555 build.

Nice little write up Dave!! Followed the link you posted and WOW...that IS the DEEPEST case I've ever seen!

wow nice psu SSS:D

more pics :D

Quote:

---

Originally Posted by Expat GriZ

Nice little write up Dave!! Followed the link you posted and WOW...that IS the DEEPEST case I've ever seen!

---

27" front to back..:D

Quote:

---

Originally Posted by Hondacity

wow nice psu SSS:D

more pics :D

---

thats 14, all I took..I still want one..:rofl:
Couple 5680's, a nice 5970 or Fermi card.. You know, just your average email machine..:D

Holy :banana::banana::banana::banana:; that's a nice barebones! 8 hot-swap SATA bays? Were those SATA-II or SATA-III?

Quote:

---

Originally Posted by Bobsama

Holy :banana::banana::banana::banana:; that's a nice barebones! 8 hot-swap SATA bays? Were those SATA-II or SATA-III?

---

Sata II I beleive..

Man....that's what I call a TRUE monster....:)

Needs more drive bays. What is it with people designing cases that can't fit 16 drives or more?!

:D Sure, it's over the top but that's my requirement.

Every dual CPU is of course superior and great, at least compared to a SP systems. But after wa have got OC-ability of double CPU on EVGA SR-2, and with these high prices on high-end Xoen DP CPUs, how can we justify buying an un-OC-able MB/system?

Is there any hope they can make this to become OC-able with a BIOS update, or one has to live with stock CPU speeds?

I have seen one at Cebit. GPU slot were populated with some dual-GPU cards (dunno if Teslas or GTX295s), but the thing looked almost divine. I maybe starred at it for a minute or two, but it felt like a few seconds :D
This really is quality tech

Quote:

---

Originally Posted by Aerou

I have seen one at Cebit. GPU slot were populated with some dual-GPU cards (dunno if Teslas or GTX295s), but the thing looked almost divine. I maybe starred at it for a minute or two, but it felt like a few seconds :D
This really is quality tech

---

Teslas, you can even order it with them pre installed.


To sam_oslo:
I hear you but for some OCing isn't in their plans and imagine this with a pair of X5677 quads at 3600 or X5680 6 cores at 3458..
Still huge power..
in my SM X8DA3 dual 1366 MB the X5680's did app 82% at 3458 of what they are doing in the W555 board.
This is XS so we push the limits but many don't.
Personally for a daily driver to do all I'd love this setup with one big vid card( or 2..:D..) and a bunch of large drives for data and a couple SSD's in raid1 for the OS..
Perfect combo IMHO.

Needs more ram slots... :rofl::rofl::rofl:

That PSU is insane :up:

Amazing motherboard, and case; particularly the motherboard. Though, I agree with Particle about the case, in that it needs more drive bays.

Quote:

---

Originally Posted by SAL36864

Amazing motherboard, and case; particularly the motherboard. Though, I agree with Particle about the case, in that it needs more drive bays.

---

There's room for 2 more in the 5.25" bays and thats a total of 10..
With 2 tera drives available you need more than 40 terabyte storage?:rofl:

Quote:

---

Originally Posted by Movieman

With 2 tera drives available you need more than 40 terabyte storage?:rofl:

---

yes! blu-ray movies are at 15 gigabytes minimum

Quote:

---

Originally Posted by ridney

yes! blu-ray movies are at 15 gigabytes minimum

---

+1 for that already have 6TB of blu-rays

Quote:

---

Originally Posted by ridney

yes! blu-ray movies are at 15 gigabytes minimum

---

Get a NAS!:rofl:

Quote:

---

Originally Posted by =[PULSAR]=

+1 for that already have 6TB of blu-rays

---

OOH really? Got a list?:D

Just spent an hour on the phone with a guy describing this setup and he's ordering one tomorrow!:up:

Movieman, you get to play with all the toys. :( :P Very nice review, and God what a system. Too bad they didn't let you keep it.

Quote:

---

Originally Posted by chuchnit

Movieman, you get to play with all the toys. :( :P Very nice review, and God what a system. Too bad they didn't let you keep it.

---

Thanks.
God's truth,the build quality is really special and that PSU is a mind blower.
Then the board will take anthing you can throw at it.