Printable View
Playing around again, heres the setup:
Phenom II 965BE C3 CACAC AC 0945DPBW #N#####N#0662 - Lapped
Sunbeam Core Contact Freezer
Gigabyte 890GPA-UD3H - thanks to brian (chew*) and Simon (64NOMIS)
2GB Crucial Ballistix CAS 8 DDR3-1600 D9GTS - thanks to Angelo (chispy)
2x Western Digital Caviar Black RAID 0
OCZ 700w GameXStream
19c ambient...kinda chilly in here for my tastes.
We will start the evening off with SuperPi 1M:
http://img133.imageshack.us/img133/3258/4387superpi.png
*reserved*
*reserved**
Looking great!
great start,cant wait to see how far you can push your new setup Beep.
are you planning on trying WCing in the future?
Great results Beep...:up:
your new toys seem "juicy"...keep up pushing:D
he mentioned in an earlier thread that he wanted to go with wc setup.
Quote:
Originally Posted by radaja
Hey Beep, you were having heat issues a while back. Are you still having them now?
I lapped my CPU so now it's all bronze looking copper with a mirror finish ;)Quote:
Originally Posted by aythrea
It wasnt flat and most of the contect was on the outside of the heatspreader.
At 4 Ghz 1.520v my temps at max are about 50-52c and idle is down to 31-32c
wPrime was supposed to be posted but my score was rubbish. I'll try again later...
Heres my highest moderately stable, it fails right at the one hour mark. Temps are just borderline... http://img13.imageshack.us/img13/3706/155v4040.jpg
But I'm running 4.11 @ 1.55 and 2.8 NB in my sig, it does all my games, whatever else I do...cant run Prime95 for one minute though XD
http://valid.canardpc.com/cache/banner/1081367.png
http://valid.canardpc.com/cache/screenshot/1081367.png
4.5 is surely there....
BTW thats one core but NB was @ 2.86-ish
I already beat my old mobo on validating by 50 Mhz and about 80 Mhz stability.
Nice RAM Timing you got there
nice Beep, lapping maybe help u too.
Very good results, and that's on air! :up:
Good job, keep tweaking it! It seems like this board is better for OCing, huh?
Yeah, it's quite a bit better. I'd assume the BIOS'es still need work though I'm really suprized that I've not found one bug in this F4 BIOS yet. :yepp:Quote:
Originally Posted by zalbard
Gigabyte fixed voltage problems and I can select to run ram all the way down to 1.25v IIRC. :up: Increments are great also, they are in .02v so 1.60 to 1.62 etc. Much better than .1v increments. I havent played with any voltages other than CPU_NB, CPU vcore and DDR3 yet. Gonna try CAS 6 or at least tighten timings even more and run 1M again. Theres more in this, I have a pic from a faster run. :P
VERY nice Beep!!
I'm really glad to hear they fixed the voltage tuning options, .1v was just way too coarse....
Have you done any stability testing yet or are ya still just looking for highest valids?
Yeah, while temps are a bit better I'm still limited by my heatsink.
4 Ghz @ 1.52v is stable, 4040 Mhz with 1.55v is for the most part stable and I'm outta headroom. Were temps down another 3-4c I might be saying 4.1 Ghz stable but 4.11 (sig) @ 1.55v is fine for gaming and about every task I need as long as temps dont push over 50c. @ 4 Ghz / 2.8 NB idle is about 33c
Try it on ln2 ;) gurantee you will find a preety good bug for sureQuote:
Originally Posted by BeepBeep2
~1.52 seems to be the "sweetspot" for my chips too, and I have pretty darn good water!
I get the feeling that unless you go very cold electromigration may be coming into play on these chips at higher voltages.
If it makes you feel any better, theres NO WAY I can get my IMC Prime Stable above 2650 (on either chip), reguardless of how much voltage I throw at it.
How's the new board so far Beep? I'm willing to jump the 890 wagon as soon as more FX boards show up :) I see very nice clocks on the ram! Are you cooling them as well with a vent?
@ Daveburt714: LOL on water and with enough voltage I'm sure I could do 3000 24/7. I can cold boot 2950 on air :shrug: 2820 is stable @ 1.375v
The DDR2 UD4P was giving me trouble on NB clocking on all of the BIOS'es, I could bench high-ish around 3000 @ 1.45v but for 24/7 I couldnt go past 2600.
Nope, the RAM was running passive @ 1.95v...(could actually be borderline safe for 24/7).Quote:
Originally Posted by chinook
I guess if I wanted I could push 2.1v into them but I wont torture them that bad.
I couldnt get CAS 6 nomatter what I did, not even at 1600 at any voltage. The board just doesnt post.
did you try it with lower dividers?Quote:
Originally Posted by BeepBeep2
Yeah I can do 1300 Cas 6 but that really doesnt help too much when the ram does 1800 7-6-6. I still couldnt break 6-6-6 <----evil lol or 6-7-6 at 1600 on the lower divider.Quote:
Originally Posted by crazydiamond
is the same with stability as my CPU :) (1.532 4032 MHz, with 1.52V 4010MHz). Or u have it at x64 ?
32-bit :)Quote:
Originally Posted by FlanK3r