-
5.1GHz 980-X On...... Water! *Validated*
-
Sweet! Congratulations to you.The new Gulftowns look like big fun. Is that full tilt on the CPU multiplier?
-
Nopes, Looks like iv got a lot more headroom :)
Would like to point out this is an A0 CPU ;)
Recently bought a pot from Otti to see what this can do under LN2 :D
-
1 Attachment(s)
Nice little chip you got there and a good result. Have you done any Vantage runs yet?
Here's my Vantage result with 980-x on water.
-
Hi man,
No vantage runs yet, im not a fan of 3D benches due to my crap GPUs and random scores, id much rather 2D benches like WPrime and SPi,
I have 2x GTX280's, 1x GTX260 and 3x 8800Ultras
-
Ok, I'll try to hit the 5 GHz to night with cooled water and do some WPrime and SuperPI runs. Yuo've got the Q3QP like me right?
I've also got a Q3FE but it's half dead now, did some LN2 benching with it and hit 5,6 GHz.
-
wow, very nice cpu! great job :up:
-
looks hot mate.. i envy your set-up.. :D
-
Thats not core i7 980 X cuz the cpu has stock speed of 3,33ghz ! and yours is 3,07ghz
-
Yep im Q3QP too :)
Im just using a standard WCing loop no chillers etc,
Iwaki RD-30>Sqiftech Apogee XT>PA120.3>EK400 Res>Iwaki RD-30 (I have another PA120.2 that i can whack in the loop if i feel like it ;))
Im gonna get a Q3FE hopefully, LN2 it :)
How did you half kill it?
@Beleno - Cheers dude great chip waiting on my Q3FE ;)
@PyronOrm - you need to research a bit more mate, 3.07GHz IS 980-X its a Q3QP the Q4EG is 3.33GHz Rev B1 mine is RevA0 ;)
@belmontrich - Cheers man!
-
Quote:
Originally Posted by
Mutant_Tractor
Yep im Q3QP too :)
Im just using a standard WCing loop no chillers etc,
Iwaki RD-30>Sqiftech Apogee XT>PA120.3>EK400 Res>Iwaki RD-30 (I have another PA120.2 that i can whack in the loop if i feel like it ;))
Im gonna get a Q3FE hopefully, LN2 it :)
How did you half kill it?
Your loop is similar to mine, I'm using DCC pluss in a XSPC 5,25 res> PA120.3>Apogee XT with no chillers.
As I live in Norway all I've to do to get chilled water is to open the window/door and place the system close to it, it's -10 C outside:p:
I've got now idea how the Q3FE half died, it boots with vcore below 1,2 but just bsod with anything above:shrug:
-
Dang, this is pretty sick, what was the BIOS-set voltage?
-
Quote:
Originally Posted by
Mutant_Tractor
Yep im Q3QP too :)
Im just using a standard WCing loop no chillers etc,
Iwaki RD-30>Sqiftech Apogee XT>PA120.3>EK400 Res>Iwaki RD-30 (I have another PA120.2 that i can whack in the loop if i feel like it ;))
Im gonna get a Q3FE hopefully, LN2 it :)
How did you half kill it?
@Beleno - Cheers dude great chip waiting on my Q3FE ;)
@PyronOrm - you need to research a bit more mate, 3.07GHz IS 980-X its a Q3QP the Q4EG is 3.33GHz Rev B1 mine is RevA0 ;)
@belmontrich - Cheers man!
Q3FE / Q3QP arent 980x , That s only pre sample Gulftown.
Q3VG (3.33Ghz B0) and Q4EG (3.33Ghz B1) are 980x :D
-
hmmm gpu-z sys Ati Hd 5800 and HD 5900 ? weird
-
Quote:
Originally Posted by
PytonOrm
hmmm gpu-z sys Ati Hd 5800 and HD 5900 ? weird
Yes its weird but I wanted to try out quadfire on my R2E and I already had 2x 5870's so the only solution was a 5970. I now got a P6T7 and 4x 5870 that I will try out today.
-
Quote:
Originally Posted by
Mydog
Yes its weird but I wanted to try out quadfire on my R2E and I already had 2x 5870's so the only solution was a 5970. I now got a P6T7 and 4x 5870 that I will try out today.
:D:up:Ok
-
Quote:
Originally Posted by
Mydog
Your loop is similar to mine, I'm using DCC pluss in a XSPC 5,25 res> PA120.3>Apogee XT with no chillers.
As I live in Norway all I've to do to get chilled water is to open the window/door and place the system close to it, it's -10 C outside:p:
I've got now idea how the Q3FE half died, it boots with vcore below 1,2 but just bsod with anything above:shrug:
Ahh cool :)
I might run my rig outside, im unsure how reliable the temp sensors on my cores are though, showing 36-46*C when prinning @ 5.1GHz with my fans on full blast through the rad and on the shipset (All Scythe Ultra Kase 3000 150CFM fans + Scythe Kama Flex 80mm 90CFM fans)
Hmm, that doesnt sound right... did it only start after the LN2?
Quote:
Originally Posted by
zalbard
Dang, this is pretty sick, what was the BIOS-set voltage?
Voltage i set was 1.58VCore :)
Quote:
Originally Posted by
Pt1t
Q3FE / Q3QP arent 980x , That s only pre sample Gulftown.
Q3VG (3.33Ghz B0) and Q4EG (3.33Ghz B1) are 980x :D
Ahh gotcha, that said RevA0 is far superior to RevB0 much like with i7-975's,
I know of someone who has both Q3QP, Q3FE, Q3VG + Q4EG and by his results under LN2 the best performing is by far the Q3FE (6.5-6.6GHz) then Q3QP (6.4GHz) then Q3VG (6.2GHz) and finally Q4EG (6.1GHz) it may not seem like a lot but there are worl records to be had ;)
-
Quote:
Hmm, that doesnt sound right... did it only start after the LN2?
It started during the LN2 run after about 4 hours, thought it was ice problem with the first memslot at first.
-
For sure you insulated right?
Condensation is a killer...
-
Yes insulation was good, but after 4 hours ++ I got some ice on the first mem slot.
-
Hmm, could it have anything to do with it shorting out and perhaps messing with the mem controller on the chip?
-
thats my thought too, cause it bsods on everything but stock vtt
-
That definatly sounds like your mem controller is gone then :(
And theres very little you can do to a broken chip :/
-
The only thing to do is to set the vcore to 2,2 and say godbye:ROTF:
-
Hahahaha!
Well you can run it at stock volts for the rest of its life on air ;)
