[Project] DP's Watercooled Banquet Table :-P

Banchetto is Italian for Banquet in case anyone didnt get my joke :D

This will be an on going work log of my water cooled Banchetto case. As of right now she is air cooled and awaiting a few things before the transformation begins.

Specs:
Banchetto 101 Bench case
Intel D0 920
Asus P6T6 Revolution
G.Skill 6gb DDR3 1600
Sapphire 4890 TOXIC
Intel X-25 E 64gb SSD
Seagate 7200.10 250gb x 2

Water cooling parts:
HeatKillers 3.0 Nickel plated
Koolance P6T6 Motherboard Block
EK Acrylic/Nickel 4890 Block
355 Pump - XSPC Res Top
2 MCR320 mounted via Custom laser cut acrylic mount
3/8"-5/8" Primochill LRT Pro tubing
Feser One UV Orange fluid

Things Im waiting for:
Ek 4890 Block
2 Rads
MDPC sleve
misc fittings
Rad bracke
Rad Fans

http://i297.photobucket.com/albums/m...s/DSC_0476.jpg

http://i297.photobucket.com/albums/m...s/DSC_0479.jpg

http://i297.photobucket.com/albums/m...s/DSC_0484.jpg

http://i297.photobucket.com/albums/m...s/DSC_0448.jpg

http://i297.photobucket.com/albums/m...s/DSC_0449.jpg

For anyone that missed my post in the LC section this is how the bracket will look once cut:

http://i297.photobucket.com/albums/m...d_Bracket1.jpg

http://i297.photobucket.com/albums/m...Banchetto1.jpg

http://i297.photobucket.com/albums/m...Banchetto2.jpg

Stay tuned for more!

I didn't know that lol. I wonder how many people did.

Looking forward to updates. I like that SSD mount.

Love the blocks, very sleek looking.

those are some great shots, what camera are you using?

thanks, its a nikon D60 with kit 18-55 lens. im still a dslr nub but I have been practicing.

I'll have some new shots up tonight

do you have a build log of the assembly of the acrylic stuff you have right now? that looks really interesting!

Suscribed!!!

whats with you guys and your expensive cameras?

looks really good :D

Quote:

---

Originally Posted by Stvwndr219

do you have a build log of the assembly of the acrylic stuff you have right now? that looks really interesting!

---

I didnt get the acrylic stuff in yet, this is actually going to be the build log as I go through the process of water cooling my rig. :)

Can't wait to see how your acrylic radiator brackets turn out....

Also great job on nickel plating the HK 3.0 :up:

So I finished painting my DVD drive and my Mosfet heat sinks. I dont want to water cool the mosfets because I think it tends to look cluttered when you start having that many blocks, but having the heat sinks copper wasnt going to go with my nickel theme. So, I decided why not black.

http://i297.photobucket.com/albums/m...s/DSC_0504.jpg

http://i297.photobucket.com/albums/m...s/DSC_0506.jpg

http://i297.photobucket.com/albums/m...s/DSC_0511.jpg

For those interested in the HD mount. I made these on my lathe out of 1/4" Aluminum rod.

http://i297.photobucket.com/albums/m...s/DSC_0490.jpg

Radiator bracket is in, taking pics now!

sub'd this is going to be good

I was originally making the bracket out of 3/8" clear acrylic but based on the opinion of the laser shop, they recommended that it might be more cost effective if had two 3/16" brackets cut and sandwiched together.

Keep in mind the protective film is still on so that I dont scratch them before they are mounted permanently.

http://i297.photobucket.com/albums/m...s/DSC_0643.jpg

http://i297.photobucket.com/albums/m...s/DSC_0644.jpg

http://i297.photobucket.com/albums/m...s/DSC_0637.jpg


http://i297.photobucket.com/albums/m...s/DSC_0639.jpg

The smaller square cutouts match the cutouts on the original bracket and the larger square cutouts will accommodate the cables going to the mobo

http://i297.photobucket.com/albums/m...s/DSC_0631.jpg

http://i297.photobucket.com/albums/m...s/DSC_0633.jpg

http://i297.photobucket.com/albums/m...s/DSC_0635.jpg

The height appears to be perfect. I was worried that I wouldn't be able to get the 2nd rad to sit lower then the video card but as you can see the card is still the highest point (which is what I wanted)

http://i297.photobucket.com/albums/m...s/DSC_0636.jpg

Here is a quick shot of the cable routing. Plenty of room to fit everything

http://i297.photobucket.com/albums/m...s/DSC_0630.jpg


Everything else will be here at the end of the week so more pictures to follow. :)

those dual rads are going to look sick. nice job with the bracket.

one question: how will you connect your graphics card? there doesnt seem to be any room between the card and the bracket.

Quote:

---

Originally Posted by barretp

those dual rads are going to look sick. nice job with the bracket.

one question: how will you connect your graphics card? there doesnt seem to be any room between the card and the bracket.

---

Thanks!

Do you mean the DVI cable? There is actually plenty of room between the back of the mobo and the bracket. if you look at the last pic the DVI cable is actually partially visible. :up:

Oh my bad, I totally missed the last two photos

Lets see some picks of the rads mounted plz! :D

Excellent work DP, I really like the radiator bracket/mount. :up:

Wow, this looks really good. I like you idea for the sdd mounts!

I'm loving these bench tables, look very cool when done neatly.

Quote:

---

Originally Posted by Liderc

I'm loving these bench tables, look very cool when done neatly.

---

It will look really clean once all the water stuff is on there and once Nils gets some MDPC back in stock. :D

Quote:

---

Originally Posted by genERIC

Wow, this looks really good. I like you idea for the sdd mounts!

---

Thanks, I am thinking about making them out of Delrin next for a little bit of stealth.

looks amazing :up:

Quote:

---

Originally Posted by skinnee

Lets see some picks of the rads mounted plz! :D

Excellent work DP, I really like the radiator bracket/mount. :up:

---

As soon as I get them in I will have pics up. Hoping by friday