Full Tower from the past, they don't make 'm like they used to...

Well, after realizing that I won't be able to fit 2 rads in my Chieftec Mesh case,
so I exchanged it for a vintage full tower one...

Behold:
http://i155.photobucket.com/albums/s...r/DSCF4532.jpg
http://i155.photobucket.com/albums/s...r/DSCF4527.jpg
Digg the sliding mobo tray:
http://i155.photobucket.com/albums/s...r/DSCF4530.jpg
http://i155.photobucket.com/albums/s...r/DSCF4531.jpg
And the sliding top cover:
http://i155.photobucket.com/albums/s...r/DSCF4533.jpg
All panels off:
http://i155.photobucket.com/albums/s...r/DSCF4536.jpg

The problem now is:
my rads still don't fit!!!
(the double rad fits on top perfectly, but I have a hard time figuring out how to fit the tripple one...)
http://i155.photobucket.com/albums/s...r/DSCF4538.jpg
http://i155.photobucket.com/albums/s...r/DSCF4539.jpg
http://i155.photobucket.com/albums/s...r/DSCF4540.jpg

My innitial plan was to arrange the rads something like this:
http://i155.photobucket.com/albums/s...WC_Setup_3.gif

Maybe you give will have some original thoughts on rad placement...

Update:
After thinking about it and reading your posts I came up with this:
http://i155.photobucket.com/albums/s...r/DSCF4543.jpg
http://i155.photobucket.com/albums/s...r/DSCF4546.jpg
http://i155.photobucket.com/albums/s...r/DSCF4548.jpg
http://i155.photobucket.com/albums/s...r/DSCF4550.jpg

As You can see the rad does not fit 100% yet, i have to enlarge the hole at the back that I made.

And another update:
did some more work on the case today:
http://i155.photobucket.com/albums/s...r/DSCF4551.jpg
http://i155.photobucket.com/albums/s...r/DSCF4553.jpg

The tripple rads now fits on top nicely, just needs a bit of work with the mounting brakets.
Cut the hole for the double rad, also need to make some brackets.
Enlarged the PSU hole. Some other misc pieces removed.

thats a pretty amazing case you got yourself there......very nice indeed!!

that thing is huge! I remember I had a Gateway P2-450 (yes that's 450MHz) that was a monster and not even close to the size of your case.

Quote:

---

Originally Posted by KaptCrunch

i guess you want all internal mounted rads ?

if not mount them verticle on right side of case (backside MB) with spacers allowing air to blast on right cover pulling air through rad

configure: rad/fan/spacer/right cover

or if handy.....stretch the long sills making case longer from front to back to allow for rad length and make new side panels

---

Yep I wanted all internal setup, If this case was longer than it would be awesome, tripple on top double on the bottom.
If I had a MIG welding machine I could go crazy (as in crazy moding) but as it stands lenghtening the case is a no go...

Yep both rads have a bleed ports, but i can always bleed em first and then mount horizontal...

Looks like an old Addtronics. http://www.addtronics.com/addt/index...ffa1d7c0aefe3e

Cut a hole in the back and let the triple stick out a little?

Looks like a Chenbro made for Supercom, was it a "TouchServer"?

Haha! I thought about doing something like this in that exact same case! I traded the case with a P3 oc'd to 1.2ghz (LOL) for daily running for an empty midtower I needed to do another build in. The reason I decided to dump that case was because I couldn't fit a 2x120 + a 3x120 radiator inside :( Good luck!

The only way I could come up with was to use a USB dvd drive and put the triple up front and double up top like you have in the diagram. I was thinking of using a MM hdd rack mounted to the back fan over the PSU too if it helps but 2.5" drives would really be the way to go here.

Old bieges were hueg. No surprise there, some excellent mod builds have been done in them :)

I have one that is similar size. The only problem I have with the old ones are they aren't very deep you can't even fit a triple up top.

Hah! That's not even that big! You should see some of the old AT server cases! I had one that was taller than my MM Pinnacle at one point! Not to mention the weight of all that steel!

--Matt

Yep, they sure don't make 'em like they used to...

Update:
After thinking about it and reading your posts I came up with this:

Pics moved to first post

As You can see the rad does not fit 100% yet, i have to enlarge the hole at the back that I made,
But I think it is a reasonable tradeoff.

What do you guys think?

I think you could've gotten away with top mounting the triple radiator diagonally, make somekind of shroud and let the fans blow up and out. But whatever works I guess.

Speaking as someone who owns a few of those older cases, they aren't particularly good for WCing. In general, they are really short length wise and have a lot of "dead space" (IE small empty areas that are fairly unusable except for maybe a 120.1). That said, I applaud you if you can come up with a workable arrangement for two 120.3 rads. I gave up and went with a 120.2 on the top instead.

And another update:

did some more work on the case today:
(pics moved to first post)

The tripple rads now fits on top nicely, just needs a bit of work with the mounting brakets.
Cut the hole for the double rad, also need to make some brackets.
Enlarged the PSU hole. Some other misc pieces removed.

And another update:

my project stalled a bit, because of some problems at work (working 2 jobs tends to be pretty :banana::banana::banana::banana:ty sometimes)

But I have some news for you!

Completed the radiator brackets:
120x2:
http://i155.photobucket.com/albums/s...r/DSCF4557.jpg
http://i155.photobucket.com/albums/s...r/DSCF4558.jpg
120x3:
http://i155.photobucket.com/albums/s...r/DSCF4559.jpg

Spent the whole week thinking how to mount the resevoir.
Today finally had time to do some work:
http://i155.photobucket.com/albums/s...r/DSCF4563.jpg


So, now I have to think how to route the rest of the tubing:
http://i155.photobucket.com/albums/s...r/DSCF4570.jpg
I was thinking along the lines:
http://i155.photobucket.com/albums/s...er/routing.jpg

But the problem here is that if I route the tubing through the mb i/o plate
I won't be able to use the sliding mobo tray without taking the loop apart :(
And I want to be able to slide out the mobo tray...

I'm having a hard time thinking of a way to pull this off, so I was hoping you guys could rescue me :help:

Quick disconnects? Check Koolance

is that silver coil in the res? retail? where from?
nice case and nice mods so far. i might have added another 240 between the upper and lower chamber. this will be nice when its done

Quote:

---

Originally Posted by Bond Number

Quick disconnects? Check Koolance

---

Ok thanks, just read a couple of threads about quick disconnects.
And I'm afraid I can't go that route as it would add too much restriction to my loop (and my pump isn't that powerfull to begin with)

Quote:

---

Originally Posted by KaptCrunch

Masterer the pump flow in pic is wrong, the top is outlet and side is inlet.

other then that looks good

---

:doh: guess I need to RTFM more often...

Quote:

---

Originally Posted by bot@xs

is that silver coil in the res? retail? where from?
nice case and nice mods so far. i might have added another 240 between the upper and lower chamber. this will be nice when its done

---

Yes thats silver. Ebay. Thanks! I would also like to stuff as much rad as possible in there, but I'm affraid the PSU leaves little to no room for another rad. Thanks again, I will sure try to do my best!

You could have been fitting two 360-rads there easily!! by just turning them 90° putting them side by side, so it pushes in on the left side of the case and pushes out und the right side...so something like a "super-sandwich" above the PSU ^^

Quote:

---

Originally Posted by GrossmeisterB

You could have been fitting two 360-rads there easily!! by just turning them 90° putting them side by side, so it pushes in on the left side of the case and pushes out und the right side...so something like a "super-sandwich" above the PSU ^^

---

Great idea! :up: But after a quick test fit I could only fit a 240 sandwich 90° in there without destroing the case, still better than one 360 rad possibly, but I'm too far into my design to make such drastic changes :(

Nice case you have there man...