The Gigabyte UD3 FSB Shootout: Post Your Highest FSB. TOP 10 Inside!!

Printable View

Show 100 post(s) from this thread on one page

10-21-2008, 08:57 PM
Zucker2k

*CALLING ALL JOE OVERCLOCKERS*UD3 FSB Shootout: Post Your Highest FSB. TOP 10 Inside!

Gigabyte has recently demonstrated the next innovation in high frequency + stability computing with the release of the UD3 (Ultra Durable 3), as well as 2oz copper line of motherboards spanning Intel P45 and X58 chipsets. To read more about this technology go here: UD3 Technology

The recently released P45 has been spotted on XS benching 3D at an unprecedented 670FSB :eek:, and even more impressive, pushing a 45nm quadcore easily to 540FSB; thread here Quadcore @ 540FSB here

Simple Question: Is your board better than a UD3P? Let's see some overclocks; even if you fall short, it's okay. At least try to make it to the top ten list.

Please keep it short and to the point, I'll update the thread with a list of the top 10 FSB overclocks from this post. CPU-Z validations are welcome. Cheers.
************************************************** ************************************************** *******************

Top 10 FSB Shootout: Dual Core

1. Antoine76 - Gigabyte EP45T-Extreme - E8600 @ 8x702.42 FSB
2. Mrcape - Biostar TPower I45 - E8400 @ 9x678.52
3. Deux - Biostar TPower I45 - Xeon E3120 (ES) @ 9.5x638.76 FSB
4. Nikk - DFI LP DK P45 - E8400 @ 6x625
5. pangingIII - Gigabyte EP45-UD3R - E8400 @ 7.5x620
6. Benny Lodewijk - Gigabyte EP45-UD3P - E8600 @ 6x620 FSB
7. Zucker2k - Asus Rampage Formula - E8600 @ 7.5x600 FSB
8. zodden - Gigabyte EP45-UD3P - E8400 @ 7x575 FSB
9. Philbrown23 - Biostar TPower I45 - E8500 @ 9.5x526.6 FSB

Top 10 FSB Shootout: Quadcore

1. NapalmV5 - Gigabyte EP45-DQ6 - Q9650 @ 9x556 FSB
2. Systemviper - Gigabyte EP45-UD3P - Q9650 @ 9x535 FSB
3. Leeghoofd - Asus P5Q Deluxe - QX9650 @ 9x500 FSB
4. Zucker2k - Asus Rampage Formula - Q9550 @ 8.5x495 FSB
10-22-2008, 12:35 AM
mustkill

interesting.. however i do not believe in durability. This is because no1 is gonna use a board for 5years+... so whats the point of it being ULTRA durable?

no real OC-er uses fossil old boards... and thus do not require that durability that GB provides.....
10-22-2008, 02:05 AM
Benny Lodewijk

1. With this technological innovation, among a host of others new features currently being introduced by Gigabyte, is UD3 the real deal, or a gimmick?

I believe this is real deal. I remember GIGABYTE starting to introducing All Solid Capacitor Motherboard for more durability few years ago and then Ultra Durable, Ultra Durable2 and now Ultra Durable3. And we can see other brands follow the trend from GIGABYTE.

2. Is Gigabyte set to take on Asus?

Can't comment about this :D

3. What brand of board are you using, and how far has it pushed your CPU on the FSB?

I'm using GIGABYTE P45-Extreme and GIGABYTE EP45UD3P. (click the link for FSB information)

4. Would you seriously consider Gigabyte for your next upgrade after learning of this new technology?

Already upgrade to UD3.

I want to add something about UD3. GIGABYTE just release their newest testing for UD3.

http://www.gigabyte.com.tw/FileList/...tracool-10.jpg

details : http://www.gigabyte.com.tw/FileList/...ultra-cool.htm
10-22-2008, 05:51 AM
Zucker2k

2 Attachment(s)

Those are interesting thermal shots right there.

Here's my rampage formula at 600 FSB
10-22-2008, 08:53 AM
pangingIII

1. is UD3 the real deal, or a gimmick?
that's a good question but sorry i don’t know the answer yet.

2. Is Gigabyte set to take on Asus?
i think so, yes.

3. What brand of board are you using, and how far has it pushed your CPU on the FSB?
please see below.

4. Would you seriously consider Gigabyte for your next upgrade after learning of this new technology?
cannot consider at this time.

http://img227.imageshack.us/img227/9...x75cpuzkq8.png

http://img151.imageshack.us/img151/2...200cpuzxh7.png
10-22-2008, 09:00 AM
mrcape

This I did on Biostar I45/e8400 -

http://valid.x86-secret.com/cache/banner/395178.png

I want to see if this Gigabyte offers anything beyond that. It's hard to say past 650fsb unless you compare using the same ram, cpu, conditions etc.. I am tempted to grab one of these GB boards.
10-23-2008, 10:42 AM
sunny7day

670fsb has proven to work already, I'm going to buy the ddr3 version tomorrow and try it out! :)
10-23-2008, 10:48 AM
antoine76

702.4fsb with 2cores activated on gigabyte ep45t-extreme :

http://valid.x86-secret.com/cache/screenshot/428100.png

http://valid.x86-secret.com/show_oc.php?id=428100
10-23-2008, 11:25 AM
systemviper

Here's a Q9650 @ 535
http://valid.x86-secret.com/cache/banner/436087.png :surf:

.
10-23-2008, 11:30 AM
systemviper

here's a QX6850 @ 503FSB

http://valid.x86-secret.com/cache/banner/433647.png :surf:

.
10-23-2008, 11:57 AM
philbrown23

the link in my sig is the highest I've gotten on my biostar but im memory limited. the first post does not seem up to date as there is someone with 700+ fsb and your highest listed is less than that.
10-23-2008, 12:05 PM
nikk

i have posted here my first attempt at 600mhz fsb with my new dfi lp dk p45 & e8400

validation, superpi 1/32m and 3dmark06 pics included

1. is UD3 the real deal, or a gimmick?
we'll see.

2. Is Gigabyte set to take on Asus?
i wouldn't mind if they slapped around asus for a while:D.

3. What brand of board are you using, and how far has it pushed your CPU on the FSB?
posted above

4. Would you seriously consider Gigabyte for your next upgrade after learning of this new technology?
not atm
10-23-2008, 12:36 PM
Leeghoofd

1. With this technological innovation, among a host of others new features currently being introduced by Gigabyte, is UD3 the real deal, or a gimmick? Could be a better board due to a new revision chipset... I'm not impressed by high FSB as it's for benching only... 24/7 rocks my world

2. Is Gigabyte set to take on Asus? Could be they got a winner here... but would be nice to see the average Joe push it insterad of P3tit, Hipro5 and co

3. What brand of board are you using, and how far has it pushed your CPU on the FSB? Asus P5Q Dlx 500FSB on the QX9650 is doable for benching though for 24/7 Heatoutput is too high

4. Would you seriously consider Gigabyte for your next upgrade after learning of this new technology? yep I could, awaiting more news but really hesitating to go P45 again... think X48 bundled with DDR3 will be again on my list as last 775 mobo...

http://users.telenet.be/OAP/P5QDlx/4500-1200.JPG
10-23-2008, 01:02 PM
systemviper

With the new chips coming out soon the only reason i went for the gig board was that is was 106 after a 20 mir, plus DDR2 which i had some fast stuff, so it was so cheap and had potential that i wanted to play.
10-23-2008, 04:22 PM
zodden

First my highest CPU mhz. Notice how high auto settings raise volts? Can't stay at those settings and expect to keep the CPU! :D

http://img183.imageshack.us/img183/5291/crazysb0.jpg

and highest FSB

http://img227.imageshack.us/img227/4228/575x7tf1.jpg

My ram is the limiting factor here for sure.
10-23-2008, 06:46 PM
nikk

improved max fsb a bit:

625x6 validation

625x6 superpi 1m
http://img399.imageshack.us/img399/2...pi1mic1.th.jpg
10-23-2008, 07:05 PM
golfjam

systemviper,what happened to your pics??
10-23-2008, 09:47 PM
systemviper

1 Attachment(s)

looks like I captured the wrong settings screen

super pie 9.942s :surf:

.
10-24-2008, 01:10 AM
NapalmV5

systemviper congratz! :up:

you and i are the only two @ 4.8ghz on air so far

enjoy :toast:

now match my 4.9ghz on air :D
10-24-2008, 05:45 AM
systemviper

bastage :surf: plus i want 700 on my ram..

you got any settings posted, :rolleyes:

NapalmV5 :up: Ill be trying today.....
10-24-2008, 07:14 AM
Zucker2k

I've updated the top ten list. I know there are more capable boards out there, keep 'em coming.
10-24-2008, 08:31 AM
NapalmV5

Quote:

Originally Posted by systemviper

bastage :surf: plus i want 700 on my ram..

you got any settings posted, :rolleyes:

NapalmV5 :up: Ill be trying today.....

try fsb/ram 1:1 and get more outta the q9650.. the chipset on your ud3 has more left in it :up:

but i dont want you to blow up your ud3.. it aint the dq6/extreme

heres my 5ghz 556x9 q9650/giga ep45 dq6
http://valid.x86-secret.com/show_oc.php?id=423924
10-24-2008, 09:36 AM
systemviper

Quote:

Originally Posted by NapalmV5

try fsb/ram 1:1 and get more outta the q9650.. the chipset on your ud3 has more left in it :up:

but i dont want you to blow up your ud3.. it aint the dq6/extreme

heres my 5ghz 556x9 q9650/giga ep45 dq6
http://valid.x86-secret.com/show_oc.php?id=423924

:worship: 5G NapalmV5

any settings...... :YIPPIE:

I'll have to scope that board.
10-25-2008, 10:43 AM
NapalmV5

i shouldve mentioned that 5ghz is on vapoLS :)
10-25-2008, 11:02 AM
Solid Snake

I have my new GIGABYTE UD3P , i will testing coming soon

jojojojo:shocked:

Show 100 post(s) from this thread on one page