Big Mama LN2 Dewar arrival party E6850 + Gigabyte X38 + Corsair PC10K = 5.35Ghz 2D/3D

hi guys

TEAM.AU Strikes again!

i bought a s/h dewar and thought i'd give it a crack yesterday. The plan was to bench XFX 780i with tripple 8800GTX in tri-sli with QX9650 but things went bad after changing from water to LN2. After struggling with the setup for half hour on LN2 it stopped working.......after some hair dryer action etc all parts tested ok but it was time for Josh (moloko) to go and so did all the nice goodies

well that wasn't going to stop me having some fun with some of my gear :D :up: so i chucked together my favourite setup and went for it quickly :)

Can't help myself and i have to say this would be a fitting soundtrack if i had time for the youtube video edit FINAL COUNTDOWN hahaha <<loves that song and solo>>

Test Configuration:
Gigabyte X38-DQ6 DDR2 Motherboard (F3 bios)
Intel Core 2 Duo E6850 720Axxx
2GB DDR2 Corsair Dominators PC10000
Single 8800GT PCIe 2.0 512MB Graphics Card (Stock cooler)
Corsair HX620 Power Supply
Kingpin Dragon Evo 2.4 Superpot :D ... soon to meet younger bro F1 Extreme that santa is delivering :D :D
Big Mama 35L MVE LN2 Dewar
80GB Samsung SATA Hard Drive
Windows XP Pro 32bit

I was limited to 1.79v idle and 1.76-1.77v under load in vcore due to OVP on the mobo....gotta remove that lol but i maxed out the FSB on the chip anyways

i benched the GFX at only 700MHz core and 922-999 on RAM


BIG MAMA in the house
http://img180.imageshack.us/img180/5386/img1654gc2.jpghttp://img179.imageshack.us/img179/7578/img1686pi3.jpg
http://img179.imageshack.us/img179/8343/img1639fu1.jpg


Did a quick 8M SuperPi (don't mind the time)
http://img183.imageshack.us/img183/3...superpilm5.jpg



3DMARK03 run at 5.3GHz on YOUTUBE
this was the first run no tweaks and bad strap on RAM plus really loose subtimings
also auto gfx settings so result is not what i was going for
plan was to see if i can make it run 3D that high in such a short period

http://img183.imageshack.us/img183/5...345268ppg3.jpg


3DMARK05 = 27,090 points (had to submit direct but Futuremark is down atm)


AQUAMARK 3
http://img340.imageshack.us/img340/8...265527puk7.png

3DMARK01 (87K pretty decent considering the GPU clocks)
http://img338.imageshack.us/img338/8...6996p88zd8.png

1M SuperPi 9.531s @5345MHz
http://img166.imageshack.us/img166/2...rpi9531kk0.png

32M SuperPi 9m 33.061s @5350MHz
http://img177.imageshack.us/img177/3...i32m9m3uk1.png
http://img186.imageshack.us/img186/2...i32m9m3vo1.png


GIGABYTE BOARD SWIMMING IN WATER AND PERFORMING LIKE A TRUE CHAMP
http://img509.imageshack.us/img509/5123/img1716rl3.jpg
http://img174.imageshack.us/img174/8516/img1712lz7.jpg
http://img165.imageshack.us/img165/5703/img1711zc3.jpg


dinos22 :up:

first i ran down Pro's E6850 32M time on dry ice and now you go and post this. do you think the the cross-hairs are not going to find you? i'm coming for ya Dinos...me and my dry ice are coming :D

awesome work and a very nice looking dewar. not in appearance of course but in capacity ;). those waterworks shots of the board are priceless, your going to have to start benching in a tub to keep the mess to a minimum...keep up the good work man :up:

hahahah i bought an Asus X38 P5E3 DLX from OBP so now i'll start to tweak some monster runs too :D

there'll be plenty of backups :D

Quote:

---

Originally Posted by dinos22

hahahah i bought an Asus X38 P5E3 DLX from OBP so now i'll start to tweak some monster runs too :D

there'll be plenty of backups :D

---

hehe, i see your P5E3-Dlx and raise you an Asus Maximus Extreme and a kit of TWIN3X2048-1800C7DFIN, and lets not forget about the Ballistix which have already proven their worth on P35. looks like we have the makings for one heavyweight 32M bout...ding ding :D

http://www.xtremesystems.org/forums/...&postcount=182

Awesome stuff Dinos, just the thread to kick me in the backside to get moving with my monster benching marathon ;) Might try a E6850 in my Gigabyte X38-DQ6 to see if it can boot up properly - hope my X38-DQ6 isn't down for the count still heh

What's the full batch details on E6850 again L720A??? ? :)

what did the wife think of the dewar purchase ? :)

Shame about triple-SLI issues :(

This Dewar not for long storage of liquid nitrogen. This Dewar need for transportation of sperm of animals! :yepp: Therefore at it such thick aperture and capacity for immersing in nitrogen :D

Very nice results dude! :)

Good start, looking forward to see the rest :D

Quote:

---

Originally Posted by Nordling

This Dewar not for long storage of liquid nitrogen. This Dewar need for transportation of sperm of animals! :yepp: Therefore at it such thick aperture and capacity for immersing in nitrogen :D

---

LOL :D :D

Quote:

---

Originally Posted by eva2000

What's the full batch details on E6850 again L720A??? ? :)

---

im sure its his new 745 ;)

...

nice results dinos, cant wait too see the chip maxed out :up:

damn thats alot of wateeeer ;)

hahah thanks guys

nordling i bought it from a veterinary hospital (sperm dewar) w00t :D

i have the board coated in LET (Liquid Electrical Tape) two coats and in Sydney it gets toasty being summer and all lol but i've never killed a board (fingers crossed)

eva it's 745

oh btw this chip WAS maxed out

i also benched with 6 multi and no gain in FSB at all...same as 9x so more vcore would not gain me anything :(

i do have another chip coming in january which should easily bench way past 600 on LN2
that should be very interesting

already the effect of australian internet censor is having its effect :rofl:

nice run there dinos!

you lost me on the internet sensor comment
thanks for compliments :D

this dewar is amazing

i left it alone for 24 hours to see what the evaporation rate is
maaaaaaaaaaaaaaaan...i don't think anything left the tank at all :eek: :thumb:
me=happy :D

Looks really good and cool video while running + some cool pics.

Like Marc says, there is alot of water there, but good you use LET.

Keep pushing it, looking forward to your 600fsb gem.

i just realised i had maxmem for all the 3d runs
no good....that will also give a boost in numbers
but no point benching on stock air

i think i might buy some ATI cards as they seem fun to bench with and you can use the heatsink and stick a watercooler on it which is swell

was 594.5fsb is the max fsb?

Love the video's, keep em coming

Nice benchin bro,cant weait to see your results with those 2 high fsb cpus you got from opb....

Your dewar looks like the one Ive been using, its not mine though I jsut borrow it from the ln2 supplier.... I can sure use those wheels as it gets pretty heavy when full.....
http://ocidb.com/albums/userpics/100...670_-_Copy.JPG

thanks guys

Quote:

---

Originally Posted by coolice

was 594.5fsb is the max fsb?

---

i jumped to 600 and it was an instant freeze with highest and lowest multi so yeah

Holy crap, you werent lying, it acctually is for animal sperm, rofl

even I like your pics very much I would prefer some thumbs as reading while scrolling sidewards sucks :p:
Nice run but looks like you need my magic E6850 for more action :D :D :D

Quote:

---

Originally Posted by SoF

even I like your pics very much I would prefer some thumbs as reading while scrolling sidewards sucks :p:
Nice run but looks like you need my magic E6850 for more action :D :D :D

---

I have no problems reading the thread in a small window. you just need to get a bigger monitor.

Quote:

---

Originally Posted by safan80

I have no problems reading the thread in a small window. you just need to get a bigger monitor.

---

maybe he's using a 15" LCD EEK heh

left the dewar for 8-9 days and after checking the level i only saw about 1-1.5cm LN2 drop

that's pretty good
really happy with that actually :D

That's awesome. I've never even tried leaving it for that long but I've always meant to. Well over a week of nearly perfect hold time sounds great.