E6850+Dimastech SS1HP:Only a warming up run!82.2k 3d'01 ecc

Printable View

Show 100 post(s) from this thread on one page

11-06-2007, 11:37 AM
nachthymnen

E6850+Dimastech SS1HP:Only a warming up run!82.2k 3d'01 ecc

Arrived today ma Dimastech EVO BEAST 1HP SS:D
Tks to Andrea "Dimas":clap:
Immediatly put on my E6850.
Don't have control the contact between Evap and CPU:rolleyes:

Cpu @ 3.6Ghz with 1,32V
http://www.pctunerup.com/up/results/...44_-60bios.jpg

"THE BEAST":
http://www.pctunerup.com/up/results/...0244_beast.jpg

SPI @ 4596Mhz=10.953(1,6V & 1,75V-PLL)
http://www.pctunerup.com/up/results/...311_10.953.jpg

PIFAST @ 4560mhz(1,62V & 1,75V-PLL)
http://www.pctunerup.com/up/results/...ifast20.52.jpg

Aquamark3 @ 4512Mhz=250.565 (1,6V & 1,75V-PLL)
http://www.pctunerup.com/up/results/...729_250565.jpg

3dMark'01 @ 4452Mhz=82.290 (1,6V & 1,75V-PLL)
http://www.pctunerup.com/up/results/...0816_82290.jpg

This is just a warming up run, vga without v-mods and not pushed high... tomorrow I re-run all benchs with door and windows opened:up:
11-06-2007, 12:11 PM
metro.cl

Nice results but you have lots of room to improove on the CPU, with similar temps (yours a bit colder) i was able to bench easily at 4.8GHz and Super Pi at 4950MHz with a E6850.
11-06-2007, 12:51 PM
nachthymnen

Quote:

Originally Posted by metro.cl

Nice results but you have lots of room to improove on the CPU, with similar temps (yours a bit colder) i was able to bench easily at 4.8GHz and Super Pi at 4950MHz with a E6850.

Yes, it's only a very fast test:)
Today not many time to play:(
11-06-2007, 01:22 PM
Oliver

Looks really good ;).

Keep pushing it.
11-06-2007, 01:44 PM
splmann

Bravo !!! Looks good !!!

Regards

SPLMANN
11-06-2007, 08:15 PM
nachthymnen

Tks guys:)
I must take confidence again with cold temps bench:)
More than 1 years ago I've sell my Cascade:(
Today I run all 3d marks:)
Just a small '01 test @ 4.5Ghz in LL give me 1104Fps:D
11-06-2007, 09:12 PM
andre X_X

looks good.... 82k 3d01 with cpu only 4.4ghz looks promising :D
i got same scores with 2900XT (901/1083) on E6600 at 4.75ghz.
11-07-2007, 08:49 AM
nachthymnen

Quote:

Originally Posted by andre X_X

looks good.... 82k 3d01 with cpu only 4.4ghz looks promising :D
i got same scores with 2900XT (901/1083) on E6600 at 4.75ghz.

TKS Andre:D
Some up with 1,6V cpu, still testing, tomorrow mor V-core:D

3d'05 @ 4512Mhz=25.803
http://www.pctunerup.com/up/results/...5607_25803.jpg
http://service.futuremark.com/compare?3dm05=3651281

3d'01 @ 4500mhz=83025(sorry for the screen without the partials:( , also I can't up the score in the ORB:shrug: )
http://www.pctunerup.com/up/results/...5137_83025.jpg

I remember: 870.5fps N/432.2fps LH/751.4fps DH/317.0fps CH/

Aquamark 3 @ 4536Mhz=251.327
http://www.pctunerup.com/up/results/...502_251327.jpg

And I close with a fun SPI @ 4.8Ghz:D
I've problem with the RAM 1:1, can't set PL @ 6:(
No eram, no max mem, no real time and don't close Explorer:D
Just a cpu test:

SPI @ 4800mhz=10.641
http://www.pctunerup.com/up/results/..._pi4800mhz.jpg

Tomorrow I'll push the cpu with 1,66V.
I like to increase mhz a little bit per day:D
11-07-2007, 10:09 AM
nachthymnen

3 other fast test:

Aquamark3 @ 4608mhz=253.616(PCI @ 104)
http://www.pctunerup.com/up/results/...032_253616.jpg

Pifast @ 4656Mhz=20.08
http://www.pctunerup.com/up/results/...ifast20.08.jpg

Lobby low @ 4608Mhz=1129.9fps:D
http://www.pctunerup.com/up/results/...bby4608mhz.jpg

So cold:D
http://www.pctunerup.com/up/results/...eenShot006.jpg
11-07-2007, 01:18 PM
MadMax75

Complimenti anche di qua ! ottimi score , vedrai che migliori qualcosina :yepp:
11-07-2007, 06:40 PM
Enoc

nice runs Nacht

what temps do you get on load with that SS? looks like similar to dry ice temps...
11-07-2007, 06:47 PM
dinos22

that's a great cooler

if i had a better mix of gasses and load tuning i would probably have similar temps but i've tested a few CPUs and my E6850 easily benches 32M SuperPi at 4.9Ghz :D (FSB WALL) and E6750 easy 4850Mhz before it hits a FSB wall.....but i am trying to get some time and bench this E6750 past 600MHz FSB 3D....love the chip

so i guess what i'm saying is that your CPUs should be easily there too :) since you are about 10C cooler :D and similar sort of compressor and all heh

oh for reference i ran wPrime 1024M at 4840Mhz on E6750 with 1.69v and had -45C on evap around 20-21C ambient and my CPU core temp was at -14C :D
11-08-2007, 07:26 AM
nachthymnen

tks guys:D
Bad news, fsbwall around 536/537 I think:(

2 fast up:

PiFast @ 4704Mhz=19.94
http://www.pctunerup.com/up/results/...ifast19.94.jpg

SPI 1M @ 4812Mhz=10.594
http://www.pctunerup.com/up/results/...223_pi4812.jpg
http://valid.x86-secret.com/show_oc.php?id=265341

Tomorrow some 3d marks:)

ADD 09/11:
Aquamark3=254.000 (Just a test)
http://www.pctunerup.com/up/results/...725_254000.jpg

3d Mark'05 @ 4632Mhz=26.214 (PCI @ 105mhz:( )
http://www.pctunerup.com/up/results/...044_26214a.jpg
http://service.futuremark.com/compare?3dm05=3657435

3d Mark'01 @ 4632Mhz=84.498 (Bad GT1)
http://www.pctunerup.com/up/results/...104_84498a.jpg
11-09-2007, 10:09 AM
nachthymnen

2 fast test @ '03 and '06, vga with low freq.:)
18.5° room

3d'03 @ 4596mhz=53.652
http://www.pctunerup.com/up/results/...340_53652a.JPG

3d'06 @ 4596Mhz=15.974
http://www.pctunerup.com/up/results/...326_15974a.JPG

The thermomether sensor is not installed well but here is a shot during '06 with cpu @ 4596mhz at 1,72V and 19° room temp(phase warking from around an hour)
http://www.pctunerup.com/up/results/...mmagine004.jpg
11-10-2007, 12:59 AM
nachthymnen

Lost over 30 minutes only for run CL in 3d'01:(

3 little UP:

Aquamark3=255.746
http://www.pctunerup.com/up/results/...724_255746.jpg

3d'01=84992
http://www.pctunerup.com/up/results/...5735_84992.jpg

3d'03=54124
http://www.pctunerup.com/up/results/...5750_54124.jpg
http://service.futuremark.com/compare?2k3=5598121
11-10-2007, 01:20 AM
G H Z

Thats a nice cooler and setup nachty, if you encounter FSB limits try loosening PL levels. Your '01 & AQ3's look really good :)
11-10-2007, 01:27 AM
nachthymnen

Quote:

Originally Posted by G H Z

Thats a nice cooler and setup nachty, if you encounter FSB limits try loosening PL levels. Your '01 & AQ3's look really good :)

Tks GHZ:worship:
The cooler is very strong, and I've not control the contact between evap and cpu:)
Till now I'm not able to close PI 1M @ 536x9:(
I've try also with ram 5-5-5-15 but probably with PL7:rolleyes:
I'll try with PL @ 8:)
Well, AM3 and '01 it's not bad:D
Now my '01 sequence is:
LL/N/CH/DH/LH/DL/CL with 4.8LB each test
Starting with LL give me a boost of around 60Fps:D
When I run LL after LH I can get only 1070/1075fps
I lost 3/4fps in CH but it's nuts:)
The problem is the PCI @ only 105mhz:(
I lost around 30FPS in Nature:(
Can't wait for the v-modded Ultra's return next week:D
11-10-2007, 02:33 AM
nachthymnen

With PL @ 8 I've close SPI @ 536x9 but very very unstable:(
Just 1 time and no able to repeat now:(

2 other small UP:)

PiFast @ 4728Mhz=19.86
http://www.pctunerup.com/up/results/...ifast19.86.jpg

3d'06 @ 4620mhz=16.096
http://www.pctunerup.com/up/results/...3119_16096.jpg
http://service.futuremark.com/compare?3dm06=3710367

http://www.pctunerup.com/up/results/...40_-36full.jpg
11-10-2007, 06:14 AM
nachthymnen

Tks GHZ:D
PL @ 9

http://www.pctunerup.com/up/results/...fast19.73a.jpg

http://www.pctunerup.com/up/results/...pi4860copy.jpg
http://valid.x86-secret.com/show_oc.php?id=266225

@ 4872mhz freeze @ 10":rolleyes:
Try for 3 times but nothing.
Well, not bad at all.
11-11-2007, 02:13 AM
nachthymnen

PL @ 10

SPI @ 4896Mhz=10.438(no ERAM, no realtime)
http://www.pctunerup.com/up/results/..._pi10.438a.jpg
http://valid.x86-secret.com/show_oc.php?id=266649

@ 4908Mhz freeze after 7 seconds, but I'll try again soon:D

Tks again GHZ!:up:

SPI 2M @ 4848Mhz=25.859
http://www.pctunerup.com/up/results/...2_2M25.859.jpg

SPI 4M @ 4788Mhz=59.875
http://www.pctunerup.com/up/results/...3_4M59.875.jpg

First run in 32M, I'm searching for a stable setup for the ram...

SPI 32M @ 4596Mhz=10'54".250
http://www.pctunerup.com/up/results/...1_32M10.54.jpg
11-12-2007, 02:03 AM
nachthymnen

No more 3d bench this week:(
Vga has been sent to my friend for the v-gpu mod:D

Ram testing in 32M...

SPI 32M @ 4620mhz=10'48".469
http://www.pctunerup.com/up/results/...5_32m10.48.jpg
11-18-2007, 09:41 AM
nachthymnen

Tomorrow my friend ship back to me my Ultra v-core modded:)
This is a fast test done by him:

Air Temp=23,3°/ Water Temp=27,1° ultra @ 750/1190(gpu at 1,45v) Q6600G0 4Giga
http://www.pctunerup.com/up/results/...9_ultra750.jpg

I'll put it under iced water @ 1,55V next week:)
Hope to reach 800mhz core:)
11-18-2007, 10:13 AM
Dynasty

very nice 3d runs :clap: , single 8800 ultra still looking strong.....

what forcewares u running with.......:)
11-18-2007, 11:00 AM
nachthymnen

Quote:

Originally Posted by Dynasty

very nice 3d runs :clap: , single 8800 ultra still looking strong.....

what forcewares u running with.......:)

Tks friend:)
Can't wait for test it under cold water:D
I'll run with the 169 forceware driver:)
11-20-2007, 11:47 AM
nachthymnen

The Ultra is back:)
http://www.pctunerup.com/up/results/..._8800ultra.jpg

And tomorrow I'll receive this chip from my friend that has made 2 fast test under day-use liquid cooling setup before to send it to me...:eek:

Pi @ 4664Mhz 1,568V:D
http://www.pctunerup.com/up/results/...ork4665sp1.JPG

3d'05 @ 4500mhz 1,58V:D
http://www.pctunerup.com/up/results/...0-735-2400.JPG

Tomorrow the initials aircooled test and saturday on my -65°C SS:up:

Show 100 post(s) from this thread on one page