Asus P5K "Vanilla" vmods

Printable View

Show 100 post(s) from this thread on one page

05-25-2007, 03:08 PM
Achill3uS

Asus P5K "Vanilla" vmods

So, I made some vmod help from dinos22's photos for this great mobo :)

http://img511.imageshack.us/img511/4736/vdimmqo0.jpg

http://img297.imageshack.us/img297/4809/vdroopri0.jpg

enjoy,
Bala
06-07-2007, 09:38 PM
NewBeetle

Quote:

Originally Posted by Achill3uS

Vdimm and Vmch mods Im sure working, but the Vcore and Vdroop mods are only a try, a chance, and not tested.
Report me if they working :up: or not :down:

Hi, Achill3uS-san.
Thank you so much for your infomation of ASUS P5K Vmod.

I measure the resistance between "Vcore mod point you show" and "FD of ADP3198".
However, it showed 28k ohm, and not zero. :confused:

So I did Vcore mod as follows.
At present, it seems to go well. :up:

DEWA DEWA ～

NewBeetle

http://homepage2.nifty.com/NewBeetle...re-mod+TXT.jpg
06-07-2007, 10:05 PM
Achill3uS

Thank you very much for your report NewBeetle-san :up:
I will try your vcore mod, It seems worked very well :D
Congrats to your sub9sec ;)
06-08-2007, 09:50 AM
CAL930

Hi, Achill3uS-san NB-san

Point to be able to measure VDDR with clip:)
http://cal930.sakura.ne.jp/cgi-bin/c...vddmeasure.jpg
06-08-2007, 09:53 AM
SkylinGTR26

nioce vmods, look good. Maybe ill get me a vanilla board for my friends new build
06-09-2007, 09:38 AM
coop

Would these be the same on the P5K Deluxe WiFi?
06-10-2007, 04:04 AM
CAL930

Quote:

Originally Posted by coop

Would these be the same on the P5K Deluxe WiFi?

by TAM
http://u-san.net/c-board/c-board.cgi...ne;no=1141;id=

P5K Vcore Method that can be easily measured
http://cal930.sakura.ne.jp/cgi-bin/c.../p5kvcore2.jpg

http://cal930.sakura.ne.jp/cgi-bin/c.../p5kvcore1.jpg
06-10-2007, 04:59 AM
NewBeetle

Quote:

Originally Posted by CAL930

P5K Vcore Method that can be easily measured

Thank you, CAL-san ! :up:
06-10-2007, 11:12 PM
eva2000

oooh very nice CAL930.. so i assume it's same for P5K Deluxe ?

i guess if i get someone to wire up some mini SMD clips to a wire with 4pin molex i can read my vcore/vdimm on the fly without modding my board :)

also is there any trick to getting the mini SMD clippers to attach to the components on the board, everyone keeps saying components are too small for clippers to attach to ???
06-11-2007, 12:00 AM
coop

Yes, thanks. That is very easy to get to.
06-11-2007, 12:29 AM
Achill3uS

Quote:

Originally Posted by eva2000

oooh very nice CAL930.. so i assume it's same for P5K Deluxe ?

Try it eva :D

nice one CAL930, if I couldn't reach the measure points, its a good idea ;)
06-12-2007, 08:14 AM
Nosfer@tu

Quote:

Originally Posted by eva2000

oooh very nice CAL930.. so i assume it's same for P5K Deluxe ?

i guess if i get someone to wire up some mini SMD clips to a wire with 4pin molex i can read my vcore/vdimm on the fly without modding my board :)

also is there any trick to getting the mini SMD clippers to attach to the components on the board, everyone keeps saying components are too small for clippers to attach to ???

Depends what clipper you use :D
06-13-2007, 08:57 AM
|RickY|

thanks ppl :)

i'v tested the v-drop and didn't work for me, only pencil vdrop works, and to be nice, 1.5v set on bios give 1.65v real hehe but no drop
06-15-2007, 11:32 PM
blind_ripper

any one can fix the restorater vdroop mod ?
06-23-2007, 06:47 AM
ent

Guys the vMCH mod in the first post is not correct AFAIK, its 6th leg to ground not the 7th like on the picture! Ground point is also not correct its 3rd leg not 2nd one.
06-23-2007, 06:59 AM
dinos22

nice going guys :up:
glad my photos could help heh
06-23-2007, 07:00 AM
dinos22

Quote:

Originally Posted by CAL930

Hi, Achill3uS-san NB-san

Point to be able to measure VDDR with clip:)
http://cal930.sakura.ne.jp/cgi-bin/c...vddmeasure.jpg

what size IC grabbers are those

i bought some on ebay but they are waaaaaay too big

i don't know if i file off the little end hook it that would still be ok to use hmmmmmmmm
06-26-2007, 04:21 AM
eva2000

Yeah i was told IC grabbers would be too big.. so curious as well :)
06-26-2007, 05:06 AM
Gautam

I'm not sure where you guys can get electronics in Australia, but grabbers of those size are really commonplace in the US...

If it helps, here's the datasheet of the grabbers I usually use. (I think it might be the same one that CAL930-san has pictured)
06-26-2007, 05:45 AM
Achill3uS

Quote:

Originally Posted by ent

Guys the vMCH mod in the first post is not correct AFAIK, its 6th leg to ground not the 7th like on the picture! Ground point is also not correct its 3rd leg not 2nd one.

hmm interesting.. but thanks for the reports, and Im happy so much people use this great mobo :) so could somebody put here the correct vdroop and vmch mods?
06-26-2007, 10:04 PM
eva2000

Quote:

Originally Posted by Gautam

I'm not sure where you guys can get electronics in Australia, but grabbers of those size are really commonplace in the US...

If it helps, here's the datasheet of the grabbers I usually use. (I think it might be the same one that CAL930-san has pictured)

only can find 0.08" wide ones in OZ... i see the ones you have like 0.04" wide

hard to find in OZ lol
06-27-2007, 05:01 PM
NewBeetle

Quote:

Originally Posted by Achill3uS

hmm interesting.. but thanks for the reports, and Im happy so much people use this great mobo :) so could somebody put here the correct vdroop and vmch mods?

I've found "Vdroop-mod" by kyosen.
http://222.151.185.104/c-board/c-boa...ne;no=5130;id=

http://222.151.185.104/c-board/file/P5K_Vdroop-mod.jpg
06-27-2007, 10:58 PM
G H Z

Are you running that mod NewBeetle?
06-27-2007, 11:19 PM
ent

I did vdroop in the "kyosen way" and its working flawlessly, nut I used 50k (with 10-20k it should work OK also).

Sorry but I dont have a pic of the board, so I can only say that vmch mod is 6th leg of the IC wich is marked in Achillus photo to ground by 10k pot.
06-27-2007, 11:22 PM
funkflix

Same question, because i only have two 50k and 2 20k VRs left.

Show 100 post(s) from this thread on one page