E6700 L626B092 Monster clocker in the house

I recently bought another Intel CPU but this time with 10xmulti and promising LxxxBxxx stepping i thought :)


Hardware Used:
Intel Core2Duo E6700 (Batch#L626B092)
Asus P5B Deluxe WIFI (1101 bios)
2GB PC10000 Corsair Dominators
Corsair Nautilus 500 Watercooler
ATi X800 GFX Card
535W Enermax PSU

Ambients around 22-23C

I am putting it on my phase change cooler soon....just waiting for MSI P35 mobo and some DDR3 sticks to show :)




yeap that's right 4.3GHz VALIDATION
with ~1.57Vcore

Validation Link: http://valid.x86-secret.com/show_oc?id=198541

http://img182.imageshack.us/img182/2...idationaz1.png



Stepping
http://img72.imageshack.us/img72/6514/steppingio6.jpg


Cooling

http://img143.imageshack.us/img143/7...rcooledpy5.jpg


3.6GHz 1.31VCORE REAL
1 Hour Orthos Blend Priority=8 Stable

http://img502.imageshack.us/img502/7...thosblesf9.png

3.9GHz 1.49VCORE REAL
PCMARK05 Stable (i did a 4GHz run with 1.53v but it crashed around the 85% mark >> need better ambients or cooling heh)

http://img294.imageshack.us/img294/8...57287potp5.png



4GHz 1.47VCORE REAL
32M SuperPI
RAM 1:1 400MHz CAS4

MEMTEST SHOT

http://img143.imageshack.us/img143/6...ndwidthhv5.jpg

FIRST SHOT
http://img512.imageshack.us/img512/2...rstshotem6.png

SECOND SHOT
http://img221.imageshack.us/img221/9...ondshotlk2.png

THIRD SHOT
http://img501.imageshack.us/img501/2...irdshotvr9.png

SCREENIE
http://img515.imageshack.us/img515/7...superpihq2.png


HERE IS ANOTHER 4GHz 32M SuperPI run with only 1.47VCORE with 4:5 RAM RATIO

FIRST RUN
http://img527.imageshack.us/img527/9...rstshotdf3.png

SECOND RUN
http://img512.imageshack.us/img512/4...ondshotlf8.png

SCREENIE
http://img294.imageshack.us/img294/2...pi45ratxb9.png


:up:

Quote:

---

Originally Posted by dinos22

UPDATE!!!!

ok so i had some lower ambients :D ~9C lower in fact ~13-14C ambient


4440MHz Validation with 1.63v
http://valid.x86-secret.com/show_oc?id=199543

http://img523.imageshack.us/img523/7...validatfa8.png


548MHz FSB Overclock
http://valid.x86-secret.com/show_oc?id=199545t

http://img522.imageshack.us/img522/1...ionfileue8.png




4GHz SuperPI Testing with 600MHz 4-4-4-x 2.4v on Corsair PC10000 Dominators

1M - 12.516s :D

http://img340.imageshack.us/img340/6...i12516smp8.png



32M time no tweaks

http://img172.imageshack.us/img172/1...m15828ske8.png


32M time and slightly tighter timings

http://img125.imageshack.us/img125/2...m09563sll2.png


THERE IS A LOT OF GAIN FROM TWEAKING THE RAM.............i didn't even use wazza or any of the tweaks yet and just from RAM tweaking i feel i could go sub 12m but i need more vdimm :(


4150MHz 32M SuperPI :) >>> no RAM dividers to make it quick yet

http://img501.imageshack.us/img501/6...inotweavq5.png



4210MHz 1M SuperPI

http://img504.imageshack.us/img504/6...i11969sgi4.png


4224MHz 1M SuperPI

http://img340.imageshack.us/img340/4...i11985ssw2.png



4021MHz wPrime 1024M

http://img185.imageshack.us/img185/9...me68756jo2.png


4107MHz wPrime 32M

http://img503.imageshack.us/img503/1...e21156soh5.png


I REALISED AT THE END OF THE BENCHING SESSION THAT I HAD A MASSIVE KINK IN THE TUBING

FARK >>> :(

HERE IS WHAT IT LOOKED LIKE AFTER A STRAIGHTENED IT UP

http://img512.imageshack.us/img512/8062/kinkha7.png

http://img523.imageshack.us/img523/3...emsetuphs0.jpg

---

amazing, you are one lucky guy!

1.250 VID = lucky you :)

Damn! Why can't I have your luck with my e6700!?
Thanks for your help on my posts, by the way.

Great Job! :up:
jeeka

Awsome CPU there.:party:
26B is a good batch.:)
Now lets see how it behaves under phase change :shocked:
:up:

thanks guys

Quote:

---

Originally Posted by Pretender

Now lets see how it behaves under phase change :shocked:
:up:

---

i am dying to know myself

now i definitely need a copper pot for DICE and LN2 :cool:

Quote:

---

Originally Posted by freecableguy

1.250 VID = lucky you :)

---

is that always the case or general indication that the CPU is good..........is this the vcore they bin with or what's the significance of that?

omg crazy clocks

Omfg Jealousy!!!

Nice.

Quote:

---

Originally Posted by dinos22

is that always the case or general indication that the CPU is good..........is this the vcore they bin with or what's the significance of that?

---

Uh, my L628B167's vid is 1.000 :), but I really do not think the vid has alot of an effect on how good the cpu is...

Looking back, the L629A that I sold to you FCG was 1.000 also...

http://www.sspmustang.com/OT/x3060/3...rthos-run1.JPG

yeah i've seen some odd ones out there.....1.000v including.........

but you can still have a decent chip even if it says 1.3500v >>> i guess what i am asking is whether the likelyhood of the chip being better has anything to do with that VID indicator

Nice cpu, makes me wanna run to Fry's & try my luck. :0

VID does relate to performance across the same week, but other than that, it's a real toss up. Obviously, tho...626B w/ 1.325VID is not as good as 1.250VID. My quad is 1.250, and does 3ghz @ 1.2v....

Well, I don't know if Vid does much, but my E6600 with 1.3250 did 3.15 with 1.28v (1.31 in bios) and my new quad has a vid of 0.8 something (Can't check now since I fubared the bios chip) and it did 1 hour (stopped it since I wanted to see how high it would boot) of prime @ 3.2Ghz with 1.22v load (1.31 set in bios I think) I managed to boot up @ 4Ghz and get into windows with only 1.55 set in bios and this was without twicking, just set random voltage and set FSB to 400.

Quote:

---

Originally Posted by freecableguy

1.250 VID = lucky you :)

---

Where do you look for that info?

Quote:

---

Originally Posted by metro.cl

Where do you look for that info?

---

Coretemp screen :)

Awsome clocks there...the results are really GODLY!!

VID has much to do with the OC-ability vs Voltage requirement IMHO.

I also have an E6700 by the way, and its VID shown in Core Temp 0.95 is 1.2500v and this is by far the best C2D cpu I've tested up-to-date but it's still not even close to the OP. It does 3730mhz at 1.47v and Orthos full load is at 1.43v

I had another E6700, VID 1.27500 and it tops out at 3600mhz and another E6600, VID 1.3500 (Newer batch) and it tops out at 3200mhz, literally!

So not only we shoiuld take the week and batch into account but also VID as the initial voltage also plays a big role in the final OC !

he's one hell of a lucky guy
:D:D:D:D

Thanks for making us E6700 owners proud :)

I will post up the result on my QX6700 when my new bios chip arrives... I won't be doing more than one hour of prime since it really heats up fast... I don't have a rad on my water system, all I have is an office cooler cooling the water, and after an hour (Water temp started @ 9C, did'nt let my water cool completely) it got the water to about 25C... CPU temp was about 63C ( A little Ice water dropped the CPU temp back down to 43C though)

This was with the few moments I had before my Bios went down the drain.

Quote:

---

Originally Posted by fhpchris

Uh, my L628B167's vid is 1.000 :), but I really do not think the vid has alot of an effect on how good the cpu is...

Looking back, the L629A that I sold to you FCG was 1.000 also...

http://www.sspmustang.com/OT/x3060/3...rthos-run1.JPG

---

Erm.... you are using a really old version of CoreTemp. Upgrade to 0.95 and find out the real VID.

Yea, all the chips I have seen having 1.25V VID were really good clockers.... i envy u dinos.

dinos ya lucky bastard..

but coretemp 0.94 also shows correct VID

http://fileshosts.com/intel/Asus/P5K...e_12s578ms.png

my Q6600 is VID = 1.275V had 2x E6600 B1 ES both did 4023/4043mhz on water had VID = 1.275v and 1.25v IIRC

dinos your very lucky.. :D sell it to me.. hahahahaha.. :D

very lucky.. haaaaayy..

:woot: congratz

Can someone explain me what vid is, what it means? And why 1.25 is good?? Thanks
My E6600 is 1.25 as well.

http://img144.imageshack.us/img144/2127/p5k3784bs3.jpg

Quote:

---

Originally Posted by Pretender

Can someone explain me what vid is, what it means? And why 1.25 is good?? Thanks
My E6600 is 1.25 as well.

[IMG]http://img144.imageshack.us/img144/2127/p5k3784bs3

---

it means you've got a :banana::banana::banana::banana: hot cpu :D

Quote:

---

Originally Posted by Pretender

Can someone explain me what vid is, what it means? And why 1.25 is good?? Thanks
My E6600 is 1.25 as well.

http://img144.imageshack.us/img144/2127/p5k3784bs3.jpg

---

DDR3 in P5K-Deluxe? Something wrong:rolleyes:

dinos22: good cpu, my vid: 1,2375v:D