Finally, "got the stable performance at 3.6 MHz

Printable View

Show 100 post(s) from this thread on one page

03-23-2007, 01:12 PM
koc

Finally, "got the stable performance at 3.6 MHz

After dozens of changing the frequency and voltage :D :D

I got a stable performance at 3.6 MHz :banana: :banana:

Before I wasnt able to go more than 3.37 ( 375 X 9 )

http://www3.0zz0.com/2007/03/23/20/52805458.jpg

and after many tests i found out that the North Bridge is the problem

it become hot to the point that i cant touch it

So. i orderd 2 thermalright HR-05 for ( S & N ) bridge

http://www4.0zz0.com/2007/03/23/20/93066988.jpg

and i placed 60mm on both

http://www4.0zz0.com/2007/03/23/20/64605329.jpg

http://www3.0zz0.com/2007/03/23/20/67277564.jpg

and i placed them on the mobo , after removing the stuck heatsink

http://www4.0zz0.com/2007/03/23/20/81199070.jpg

http://www.arb-up.com/get-3-2007-0720tq6b.JPG

and this is the result

http://www4.0zz0.com/2007/03/23/21/47434095.jpg

http://www4.0zz0.com/2007/03/23/21/27927806.jpg

:woot: :woot: :woot: :woot: :woot: :woot: :woot:

I hope to be useful :) :)
03-23-2007, 01:20 PM
safan80

lets see if your orthos lasts 8 hours. I could do 3 hours at 3.6 with my chip. What's your batch code? What volts are you using? please give detailed bios info. for example:

Quote:

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1600 (means 400FSB)
Actual FSB (QDR), Mhz: 1600
MEM (DDR), Mhz: 800 (means 400mhz speeds)
Actual MEM (DDR), Mhz: 880.2

Vcore Voltage: 1.525 set (1.42v bios/1.41v windows idle/1.39v windows load)
Memory Voltage: 2.100v
1.2v HT Voltage: 1.3v
NB Core Voltage: 1.4v
SB Core Voltage: 1.55v
CPU VTT Voltage: 1.4v
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS: 12
Command Per Clock (CMD): 2 clock (2T)

Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200
03-23-2007, 02:21 PM
hacgumyu

Is he trying to make 3.6ghz with only 1.25v? that's quite amazing, wonder what batch is his cpu too.
03-23-2007, 02:27 PM
koc

Quote:

lets see if your orthos lasts 8 hours. I could do 3 hours at 3.6 with my chip

In fact the test ( orthos ) last for more than 3 hours and i close it manualy

and i believe that i achive a stable overclock at 3.6 MHz

Quote:

What's your batch code?

where i can fine it :confused: :confused:

and these are the bios setting that i use

AI Tuning: Manual

FSB - Memory Clock Mode: Linked
x FSB - Memory Raio: Auto
FSB (QDR), Mhz: 1600
Actual FSB (QDR), Mhz: 1600
MEM (DDR), Mhz: 1200
Actual MEM (DDR), Mhz: 1200

Vcore Voltage: 1.46250
Memory Voltage: 2.150
1.2v HT Voltage: 1.55
NB Core Voltage: 1.40
SB Core Voltage: Auto
CPU VTT Voltage: 1.40
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 5
tRCD: 5
tRP: 5
tRAS: 15
Command Per Clock (CMD): 2 clock (2T)

Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200.0

the mobo P5N32-E SLI

2X1G Corsair dominator 8500 C5 ( 5-5-5-15-2T ) 1066 MHz

I overclocked the ram also to 1200 MHz in the original timing

:) :) :) :)
03-23-2007, 02:32 PM
koc

Quote:

Is he trying to make 3.6ghz with only 1.25v? that's quite amazing, wonder what batch is his cpu too.

if this happen it will be world record overclock volt :D :D :D

i dont know why cpu-z cant read the correct Vcore volt

any way this is the reading from everest

http://www4.0zz0.com/2007/03/23/22/43027305.jpg
03-23-2007, 02:34 PM
johnsally

Quote:

Originally Posted by hacgumyu

Is he trying to make 3.6ghz with only 1.25v? that's quite amazing, wonder what batch is his cpu too.

thats just a cpuz glitch, thats not his real vcore.
03-23-2007, 02:46 PM
safan80

Quote:

Originally Posted by koc

if this happen it will be world record overclock volt :D :D :D

i dont know why cpu-z cant read the correct Vcore volt

any way this is the reading from everest

http://www4.0zz0.com/2007/03/23/22/43027305.jpg

what do you have set in the bios?
03-23-2007, 03:24 PM
StealthyFish

those are some crazy chipset heatsinks..... lol. I thought they were some lower end CPU hsf or something....
03-23-2007, 03:57 PM
koc

Quote:

those are some crazy chipset heatsinks..... lol.

with stuck hatsink i cant even touch the NB more than 4 seconds , and thats mean the temp. ore than 75 C :eek: :eek: :eek:

however with Thermalright HR-05 and after hours of playing games the NB

only become warm :) :) :)
03-23-2007, 03:59 PM
koc

Quote:

what do you have set in the bios?

Quote:

Vcore Voltage: 1.46250
Memory Voltage: 2.150
1.2v HT Voltage: 1.55
NB Core Voltage: 1.40
SB Core Voltage: Auto
CPU VTT Voltage: 1.40
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

:) :)
03-24-2007, 03:03 AM
puttekula

Swapped my Striker out for an Asus P5W DH deluxe and using an mixed wc setup.

E6600 at 3700 1.38v load (everest and probe) and 59c TAT 100% after 1 hour.... I think thats some good results....:)

http://img80.imageshack.us/img80/3132/370013859ce4.jpg
03-24-2007, 04:35 AM
koc

Quote:

Swapped my Striker out for an Asus P5W DH deluxe and using an mixed wc setup.

E6600 at 3700 1.38v load (everest and probe) and 59c TAT 100% after 1 hour.... I think thats some good results....

http://img80.imageshack.us/img80/3132/370013859ce4.jpg

very nice :)
03-24-2007, 08:30 AM
Gam3Ra

Quote:

Originally Posted by puttekula

Swapped my Striker out for an Asus P5W DH deluxe and using an mixed wc setup.

E6600 at 3700 1.38v load (everest and probe) and 59c TAT 100% after 1 hour.... I think thats some good results....:)

http://img80.imageshack.us/img80/3132/370013859ce4.jpg

Run orthos, TAT doesn't search for errors and only fire up the CPU.
03-25-2007, 01:28 PM
slim142

Koc

I have a question for you, how are you cooling the voltage regulators now? (the heatsinks that were near the CPU socket)
03-25-2007, 01:39 PM
safan80

Quote:

Originally Posted by koc

where i can fine it :confused: :confused:

the batch code is on the box and cpu. on the box it will say FPO/BATCH # sorry it took so long to reply.
03-27-2007, 07:02 AM
koc

Quote:

I have a question for you, how are you cooling the voltage regulators now? (the heatsinks that were near the CPU socket)

well : I use VGA ram cooler on the V.R

http://www.arb-up.com/get-3-2007-d08j0vjv.JPG

and its cooling very fine

Quote:

the batch code is on the box and cpu. on the box it will say FPO/BATCH

L632B061T from the box

:) :) :) :)
03-27-2007, 07:07 AM
AndyM

I like those smaller fans on your HR-05, nice and clean set up! I have a Nexus 80mm fan on mine, kind of clunky looking. HR-05's are sweet, eh?
03-27-2007, 12:02 PM
slim142

Koc

where did you get the Ultra 60mm fans? I tried to find them on ZZF and Newegg and Xoxide but had no luck.

If you could please tell me. Thanks!
03-27-2007, 12:08 PM
koc

Quote:

I like those smaller fans on your HR-05, nice and clean set up! I have a Nexus 80mm fan on mine, kind of clunky looking. HR-05's are sweet, eh?

thank you man

i use 60mm fans ( hard cooler ) on HR-05 and its work very well :) :)
03-27-2007, 12:24 PM
koc

Quote:

where did you get the Ultra 60mm fans? I tried to find them on ZZF and Newegg and Xoxide but had no luck

from TigerDirect

http://www.tigerdirect.com/applicati...3879&CatId=495

:) :) :)
03-27-2007, 12:29 PM
metalman2785

My E6600 is also week 32B. I can do 3.6 at 1.35v, 3.7 at 1.45v (Orthos blend) and 3.82 at 1.5v. (small ffts). They seem to be nice low voltage clockers.
03-27-2007, 12:31 PM
slim142

Thanks koc!

Will do this modification to my Striker Extreme since everytime I lower the NB voltage, I get more stability and longer testing time with Orthos.

Too bad I will have to get rid of that pretty heatsink roller coaster :P
03-28-2007, 08:47 AM
koc

I try to bush up mu E6600 untill 3.7

http://www.arb-up.com/get-3-2007-oi4h0cty.JPG

the system stable so far < i didnt make orthos test however i can play games for hours without problems
03-28-2007, 12:18 PM
slim142

I hope to get such nice results as you koc, I ordered everything yesterday, swiftech heatsinks, 2 thermalright hr-5, 1 60mm ultra fan pack, and as an extra the dominator fans to cool my ram :)

Koc, could you please answer my private message? Thanks
03-28-2007, 01:13 PM
Nazu

It's GHz man, not MHz :)

Show 100 post(s) from this thread on one page