New OCZ PC2-6400 Flex XLC CAS 3

I just received my new 6400 Flex CAS 3 sticks, thought I would show them off a little bit :p:

With the move to more and more ram, I figured I would start out with a 4GB config and move on from there.

EVGA 680i with P24 Bios.
Core 2 Duo E6400
OCZ EVOStream 600W
BBATI X1900XT
4GB of OCZ PC2-6400 Flex XLC CAS 3

Shots of the ram installed :hrhr:

http://www.ryderocz.info/evga680i/6400c3evga680i1.jpg
http://www.ryderocz.info/evga680i/6400c3evga680i3.jpg

Nothing fancy here just stock ram speed and timings, I will post some quick and dirty overclocking before I retire.

http://www.ryderocz.info/evga680i/680ievga6400c34gb.png

Bios shots:

http://www.ryderocz.info/evga680i/68...6400c34gb1.jpg
http://www.ryderocz.info/evga680i/68...6400c34gb2.jpg
http://www.ryderocz.info/evga680i/68...6400c34gb3.jpg
http://www.ryderocz.info/evga680i/68...6400c34gb4.jpg

very nice rams.. :) any oc reports.. :D

thanks for sharing.. :toast:

ooh, so when are the 3-3-3 sticks coming out?

sexy, need to get you some WC now. :)

No fan over the RAM? And that 15 tRAS is kinda depressing. Can you not go any lower with 4x1GB?

Quote:

---

Originally Posted by Omastar

No fan over the RAM? And that 15 tRAS is kinda depressing. Can you not go any lower with 4x1GB?

---

Not while I am trying to show pictures of the ram. When its running? Yes there is a fan over it.

Stock speeds, mate, stock speeds I will get to the overclocked part.

Quote:

---

Originally Posted by NNstep

ooh, so when are the 3-3-3 sticks coming out?

---

At the same time :D

http://www.ryderocz.info/evga680i/6400c3at333pi32m.png

2.4V is rated for CAS 3 operation, the above was done with 2.3V set in the bios.

Last one before bed, top speed so far with 2.15V set in bios, yes I know...I covered up the checksum, its not a WR :p:

Trfc is not available in the bios, so that huge number is what the board picks. It got late on me tonight, so no time to tweak everything down, but I did manage to get the subtimings a lot tighter than what the board wanted to set.

Defaults were:
Trc = 26
Twr = 6
Twtr = 11
Trrd = 5

http://www.ryderocz.info/evga680i/6400c3_491_444.png

very nice for a 4gig setup.. :D push it more please.. :D

:toast:

Quote:

---

Originally Posted by RyderOCZ

Not while I am trying to show pictures of the ram. When its running? Yes there is a fan over it.

Stock speeds, mate, stock speeds I will get to the overclocked part.



At the same time :D

http://www.ryderocz.info/evga680i/6400c3at333pi32m.png

2.4V is rated for CAS 3 operation, the above was done with 2.3V set in the bios.

---

ooh god yes :slobber:

Update to post 7, started Orthos before I went to bed, just adding that those settings are pretty stable.

http://www.ryderocz.info/evga680i/6400c3_491_prime.png

BIOS Shots:

http://www.ryderocz.info/evga680i/6400c3_491_prime1.jpg
http://www.ryderocz.info/evga680i/6400c3_491_prime2.jpg

Wow, nice ram! 490mhz @ 4-4-4-x and only 2.15v?!

:slobber:

I assume these will be affordable? For 200-300$ they would not be bad :)

Quote:

---

Originally Posted by fhpchris

I assume these will be affordable? For 200-300$ they would not be bad :)

---

i am guessing between 320-350$

cool but ur 8500 SLI EPP can do this:

http://i121.photobucket.com/albums/o...2/Shot0054.jpg

DDR2 830 3-3-3-2 1T 2.35v... with 2 sticks though, im sure its harder to OC at 4 sticks

sub timing can be lowered to 1-20-2-6-2-3.9 for benching 3dmark, pi 32m, but i just use 1-44-3-6-3 for 24/7


is it this one:
http://www.ocztechnology.com/product...lexxlc_edition

3-4-4-15 stock

Yes, a lot of Micron can do that....but this is not Micron :)

ahh, but the heatsink looks cool though,

hey btw can u OC higher with watercooling than air?? how much higher??

Quote:

---

Originally Posted by RyderOCZ

Yes, a lot of Micron can do that....but this is not Micron :)

---

Can you tell us what is it :D ? , Cheaper or more expensive than Micron ? , ,single or double sided ? :D

Quote:

---

Originally Posted by RyderOCZ

Yes, a lot of Micron can do that....but this is not Micron :)

---

Now this one is interesting! Something we've never seen before?

it cool ! for 4 sticks and i like heat spreader :)

ps. what is u power supply ?

Quote:

---

Originally Posted by RyderOCZ

Yes, a lot of Micron can do that....but this is not Micron :)

---

this is interesting.. :)

mm.. my guess.. promos?? :D

very nice rams.. :toast:

Small update, wanted to show a little more stability at DDR2-1000 at 4-4-4 timings, my last post was at 491 4-4-4, just a touch more voltage and we have 500 at 4-4-4 timings.

EDIT: Vid cards are 7800GT in SLI, btw.

2.2V set in bios:

http://www.ryderocz.info/evga680i/3d...3_444_1000.png

http://www.ryderocz.info/evga680i/prime_1000_444.png

compliment...:slobber:
which has been the maximum stable reached frequency to SP since 1mb???

Hey Ryder,

What are their Reaction to voltage? And Temperature? And is your pair hand-picked? (I suppose not though)

Thanks

Quote:

---

Originally Posted by kemo6600

Can you tell us what is it :D ? , Cheaper or more expensive than Micron ? , ,single or double sided ? :D

---

hynix is my bet