Project: Coolermaster Stacker by Snakez & Ediejo last update 18 oktober [ phase 2]

Coolermaster Stacker by Snakez & Ediejo
We started a new project.
This time we will mod a Coolermaster Stacker.
This is a project Ediejo and I work on togheter.

Don't have a name yet for this mod.
So if you guys have suggestions , feel free :D
(Excuse my English , I'm Dutch)

At first we start ripping the case :baby:
Picture's say more then words i always say :naughty:

Straight out of the box.

http://www.ediejo.dnrhosting.nl/Case...acker/cm14.JPG

After some work , this is all thats left :hip:

http://www.ediejo.dnrhosting.nl/Case...acker/cm13.JPG

The first coating.

http://www.ediejo.dnrhosting.nl/Case...acker/cm10.JPG

http://www.ediejo.dnrhosting.nl/Case...acker/cm11.JPG

http://www.ediejo.dnrhosting.nl/Case...acker/cm12.JPG

And then first layer with blue paint.

http://www.ediejo.dnrhosting.nl/Case...acker/cm16.JPG

I have some watercooling stuff ready to be built in.
This is what we will put in the case:

Eheim 1250.
Black ice pro 2.
Repack slot-in reservoir.
Swiftech apogee cpu cooler.
Frigus vga cooler

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9183.JPG

http://www.ediejo.dnrhosting.nl/Case...tacker/cm3.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9185.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9177.JPG

http://www.ediejo.dnrhosting.nl/Case...tacker/cm5.JPG

More updates will follow :dremel: .

This morning we started finishing the paintjob.
After the blue paint , we still need to spray it with some vernis.

Some more pics

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9194.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9192.JPG

http://www.ediejo.dnrhosting.nl/Case...acker/cm19.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9193.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9204.JPG

http://www.ediejo.dnrhosting.nl/Case...acker/cm16.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9208.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9215.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9195.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9198.JPG

http://www.ediejo.dnrhosting.nl/Case...acker/cm22.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9216.JPG

Next update, rebuilding the case

Now we can start rebuilding the case.

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9218.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9217.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9220.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9221.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9224.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9222.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9225.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9223.JPG

Thats it for now.
Now have to wait till stuff we ordered arrive

This is some of the stuff we ordered.

http://shop.freezinghardware.nl/prod.../2979-3122.gif

http://shop.freezinghardware.nl/prod.../2266-2326.jpg

http://shop.freezinghardware.nl/prod.../1496-1482.jpg

http://dutchcriminalsclan.nl/CMmod/DSC00305.JPG

http://dutchcriminalsclan.nl/CMmod/DSC00308.JPG

I really love this buttons

Now let's start making the hole in the top off the case for the radiator.

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0003.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0004.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0009.JPG

Not finished yet :D
We will make a layer of 5mm green uv plexi between top off the case and radgrill.

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0017.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0018.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0022.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0020.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0021.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0023.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0025.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0029.JPG

Not done yet, need some fine work now.

We also painted the inside off the top after making the hole in it.

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0026.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0027.JPG

Now let it dry.
So started to look for best place to put the powersupply and waterpump.
And also put some coolers inside the case to see if the colors are nice togheter.

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0005.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0006.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0014.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0015.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0016.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0013.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0012.JPG

Thats all for now :D
More updates will follow.

Did some more work in the plexi cover for the top.

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9228.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9226.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9230.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9227.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9229.JPG

http://www.ediejo.dnrhosting.nl/Case...r/IMG_9231.JPG

Is starting to get there
Then only thing left is paint the grill

Today(sunday) was a day of rest.
So we just cleaned the modplace , so we can walk again without bumping in to everything

http://ediejo.dnrhosting.nl/Casemods...r/stacker1.jpg

Then we better start working again.
Still a lot to be done :D

At first let's finish the radgrill and plexi.

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0042.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0043.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0053.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0068.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0060.JPG

Now lets finish some more work for the top off the case.
Another piece of plexi needed for the top.
So let's saw it first.

http://www.ediejo.dnrhosting.nl/Case.../DSCF0041c.jpg

http://www.ediejo.dnrhosting.nl/Case.../DSCF0054c.jpg

http://www.ediejo.dnrhosting.nl/Case.../DSCF0046c.jpg

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0052.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0051.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0048.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0056.JPG

We didn't like the way the radiator had to be connected to the coolers.
So whe changed it , and connected it with m4 boults.

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0057.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0067.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0069.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSCF0070.JPG

This is where we are with this mod now.
I wil try to update more frequently

I did host my pics somewhere else , because it was crap where i had them before.

Was great to see my mod @ the frontpage of Bittech :D
And offcourse an update :hehe:

First polish the cpu block:

Before:
http://www.ediejo.dnrhosting.nl/Case...r/stacker3.jpg

After some work :
http://www.ediejo.dnrhosting.nl/Case...r/stacker4.jpg

Ready:
http://www.ediejo.dnrhosting.nl/Case...r/DSC00239.JPG


Vga block:

Before:
http://www.ediejo.dnrhosting.nl/Case...r/stacker5.jpg

After:
http://www.ediejo.dnrhosting.nl/Case...r/stacker6.jpg

This baby did a good job polishing them :D

http://www.ediejo.dnrhosting.nl/Case...r/stacker2.jpg

Then it's time to put in some hardware , so we can start measure up some things.

http://www.ediejo.dnrhosting.nl/Case...r/DSC00242.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00241.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00238.JPG

Because of the deadline for the mod is in 2 weeks.
Then it will have its first lanparty.
We have decided to build it in 2 fase's.
After the lanparty we will rebuild the whole front and some more things.
But for now still a lot of work before the lanparty.

First build in the radiator
http://www.ediejo.dnrhosting.nl/Case...r/DSC00229.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00231.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00220.JPG

And work on the plexi on the top
http://www.ediejo.dnrhosting.nl/Case...r/DSC00222.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00233.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00228.JPG

Then plug in the power supply to see some first lights :naughty:
Sorry for bad quality of pics , forgot my camera so had to use my phone.
http://www.ediejo.dnrhosting.nl/Case...r/DSC00212.JPG

The blue light in the power supply i dont like, i think i will put in a green one like the rest in there

http://www.ediejo.dnrhosting.nl/Case...r/DSC00206.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00211.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00209.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00207.JPG

Blue or green in the power supply , what do you guys think???

http://www.ediejo.dnrhosting.nl/Case.../DSC00210c.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00215.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00214.JPG

http://www.ediejo.dnrhosting.nl/Case...r/DSC00213.JPG

And finally a little update from this afternoon , with normal camera :D

Today we made a plexi cover
http://www.ediejo.dnrhosting.nl/Case.../DSCF0078c.JPG

Needs a little work to make it fit
http://www.ediejo.dnrhosting.nl/Case...r/stacker7.jpg

And some holes for the hoses
http://www.ediejo.dnrhosting.nl/Case...r/stacker8.jpg

http://www.ediejo.dnrhosting.nl/Case...r/stacker9.jpg

And now lets make a mall for the stealthing part
http://www.ediejo.dnrhosting.nl/Case.../stacker10.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker11.jpg

Then it should look a little like this
http://www.ediejo.dnrhosting.nl/Case.../stacker12.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker13.jpg

Thats it for now.
tomorrow buy some alluminium to make it from that

It's time for another small update.

Today we started working on the sidepanel.
First measure things up.

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9239.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9240.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9245.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9249.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9247.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9252.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9251.JPG

Let's see how it looks :)

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9256.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9257.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9253.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9254.JPG

Then some fine work by hand.

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9258.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9259.JPG

Looks pretty straight like this.

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9262.JPG

After that the corners nice and straight.

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9261.JPG

And the result :D

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9271.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9263.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9265.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9264.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9267.JPG

http://dutchcriminalsclan.nl/CMmod/s...l/IMG_9270.JPG

Today i started working on the Metal for the stealthing part..

For some things a Darley is a great tool to use..

http://ediejo.dnrhosting.nl/Casemods.../stacker14.jpg

To cut the steel ….

http://ediejo.dnrhosting.nl/Casemods.../stacker15.jpg

Draw it and then polishing it.

http://ediejo.dnrhosting.nl/Casemods.../stacker16.jpg

The First piece out...

http://ediejo.dnrhosting.nl/Casemods.../stacker17.jpg

Next the cutout for the radiator.

http://ediejo.dnrhosting.nl/Casemods.../stacker18.jpg

This one went quickly too.

http://ediejo.dnrhosting.nl/Casemods.../stacker19.jpg

http://ediejo.dnrhosting.nl/Casemods.../stacker20.jpg

And then to the angle folder ,

http://ediejo.dnrhosting.nl/Casemods.../stacker21.jpg

Nice fit. Now the last part. :worried:

http://ediejo.dnrhosting.nl/Casemods.../stacker22.jpg

And that went great too. :hip:

http://ediejo.dnrhosting.nl/Casemods.../stacker23.jpg

Now prepare for the worst job. Galvanised metal is real bad for your health to welt. Normaly I don’t prefer to do it like this , but was no other option.

http://ediejo.dnrhosting.nl/Casemods.../stacker24.jpg

Some wires in between for the front opening.

http://ediejo.dnrhosting.nl/Casemods.../stacker25.jpg

Welded togheter.

http://ediejo.dnrhosting.nl/Casemods.../stacker26.jpg

Its difficult to welt 1,5 mm metal with a 1,2 mm wire

http://ediejo.dnrhosting.nl/Casemods.../stacker27.jpg

But the polishing machines are doing a good job. :thumb:

http://ediejo.dnrhosting.nl/Casemods.../stacker28.jpg

Next fase holes for powersupply and watercooling.

But before the next fase we must know of its fit.

Now that Ediejo did such a nice job on the metal for stealthing part.
We also must see if it fitts.
So first remove the hardware and top of the case.

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9274.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9273.JPG

And now hope it fitts.

http://www.dutchcriminalsclan.nl/CMm...g/IMG_9278.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9277.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9283.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9279.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9290.JPG

Then also put the window in front.
Really want to see the result.

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9284.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9281.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9289.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9285.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9280.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9287.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9286.JPG

http://dutchcriminalsclan.nl/CMmod/s...g/IMG_9288.JPG

Real great imo:P

Today a perfect day to finch the stealthing part.
First some calculation for the holes.

http://www.ediejo.dnrhosting.nl/Case.../stacker29.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker30.jpg

Snakez placed the pump.

http://www.ediejo.dnrhosting.nl/Case.../stacker31.jpg

Also some UV-Leds for the steahlting part..

http://www.ediejo.dnrhosting.nl/Case.../stacker32.jpg

Drilling the holes.

http://www.ediejo.dnrhosting.nl/Case.../stacker33.jpg

Last part by hand.

http://www.ediejo.dnrhosting.nl/Case.../stacker34.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker35.jpg

Its fits.

http://www.ediejo.dnrhosting.nl/Case.../stacker36.jpg

Also the tubules for the vga

http://www.ediejo.dnrhosting.nl/Case.../stacker37.jpg

Put everything back to look where we need to cut some steel.

http://www.ediejo.dnrhosting.nl/Case.../stacker38.jpg

This is what disappears under it.

http://www.ediejo.dnrhosting.nl/Case.../stacker39.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker40.jpg

Make some extra holes for the cables

http://www.ediejo.dnrhosting.nl/Case.../stacker41.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker42.jpg
This one fit also.

http://www.ediejo.dnrhosting.nl/Case.../stacker43.jpg

One big hole to make.

http://www.ediejo.dnrhosting.nl/Case.../stacker44.jpg

I think this one is on his end.

http://www.ediejo.dnrhosting.nl/Case.../stacker45.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker46.jpg

I am right back with part 2 but first a shower.

After a long day working in the casemod place, I need a shower.
I smell a little bit better now, says my girlfriend.
Time to go on with the big hole for the psu.

http://www.ediejo.dnrhosting.nl/Case.../stacker47.jpg

Last piece with a file.

http://www.ediejo.dnrhosting.nl/Case.../stacker48.jpg

I think it is better to turn the fan grill 45 degrees.

http://www.ediejo.dnrhosting.nl/Case.../stacker49.jpg

There is the putty again. ;)

http://www.ediejo.dnrhosting.nl/Case.../stacker50.jpg

And scoured.

http://www.ediejo.dnrhosting.nl/Case.../stacker51.jpg

And thane some spray putty.

http://www.ediejo.dnrhosting.nl/Case.../stacker52.jpg

I don’t have a Photo from the primer on the stealthing part.
But in bleu I have some

http://www.ediejo.dnrhosting.nl/Case.../stacker53.jpg

Also the rest what I forgot to spray bleu. ;)

http://www.ediejo.dnrhosting.nl/Case.../stacker54.jpg

And at last for today 2 photo’s with the stealthing part in the case.

http://www.ediejo.dnrhosting.nl/Case.../stacker55.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker56.jpg

Tomorrow more after the Formule 1 Race. :D

Today not such a long das as yesterday:P


And a picture with sidepanel , we forgot it yesterday

http://www.ediejo.dnrhosting.nl/Case.../stacker57.jpg


A whole day soldering the leds.

http://www.ediejo.dnrhosting.nl/Case.../stacker58.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker59.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker60.jpg

What a wires :P

http://www.ediejo.dnrhosting.nl/Case.../stacker61.jpg

With s few tiewraps it looks much much better.

http://www.ediejo.dnrhosting.nl/Case.../stacker62.jpg

They work.

http://www.ediejo.dnrhosting.nl/Case.../stacker63.jpg

Now the rest.

http://www.ediejo.dnrhosting.nl/Case.../stacker64.jpg

The fans put on it's place.

http://www.ediejo.dnrhosting.nl/Case.../stacker65.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker66.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker67.jpg

Meanwhile the rst of the leds got wired.

http://www.ediejo.dnrhosting.nl/Case.../stacker68.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker69.jpg


After dinner the rest will follow

Before we put the stealthing piece back , first put some leds in the top of the case.

http://www.ediejo.dnrhosting.nl/Case.../stacker70.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker71.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker72.jpg

Thats back togheter again.

http://www.ediejo.dnrhosting.nl/Case.../stacker73.jpg

Working fine.

http://www.ediejo.dnrhosting.nl/Case.../stacker74.jpg

In the plexi under the radgril we need to put some led's too , but will be in Fase 2

http://www.ediejo.dnrhosting.nl/Case.../stacker75.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker76.jpg

The stealthing part back on it's place too.

http://www.ediejo.dnrhosting.nl/Case.../stacker78.jpg

Sidepanel in front.

http://www.ediejo.dnrhosting.nl/Case.../stacker79.jpg

Then kill the lights and try the new camera:P

http://www.ediejo.dnrhosting.nl/Case.../stacker80.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker81.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker82.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker83.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker84.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker85.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker86.jpg

Look at Snakez standing there

http://www.ediejo.dnrhosting.nl/Case.../stacker77.jpg

This front has to go too , will be done in fase 2 also

http://www.ediejo.dnrhosting.nl/Case.../stacker87.jpg

See you soon.

I forgot 2 nice photo, thats what Snakez say. So you can clic this one.

http://www.ediejo.dnrhosting.nl/Case.../stacker88.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker89.jpg

Today I start with the plexi part from the side panel.

Take over the measure firstly.

http://www.ediejo.dnrhosting.nl/Case.../stacker90.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker91.jpg

Snakez put the hardware in the case. Only we have hoses to short.

http://www.ediejo.dnrhosting.nl/Case.../stacker92.jpg

Making the holes in the sidepanel

http://www.ediejo.dnrhosting.nl/Case.../stacker93.jpg

Put some tape on the Coolermaster sidepanel.

http://www.ediejo.dnrhosting.nl/Case.../stacker94.jpg

Now I can take over the holes from the plexi.

http://www.ediejo.dnrhosting.nl/Case.../stacker95.jpg

Than we saw it.

http://www.ediejo.dnrhosting.nl/Case.../stacker96.jpg

http://www.ediejo.dnrhosting.nl/Case.../stacker97.jpg

Making the sidepanel some smoother.

http://www.ediejo.dnrhosting.nl/Case.../stacker98.jpg

And this is how it looks with the sidepanel on his place..

http://www.ediejo.dnrhosting.nl/Case.../stacker99.jpg

Turn the leds on.

http://www.ediejo.dnrhosting.nl/Case...stacker100.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker101.jpg

And make it dark pleace.

http://www.ediejo.dnrhosting.nl/Case...stacker102.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker103.jpg

A little bit closer. :P

http://www.ediejo.dnrhosting.nl/Case...stacker104.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker105.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker106.jpg

The backside.

http://www.ediejo.dnrhosting.nl/Case...stacker107.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker111.jpg

Some close up photos.

http://www.ediejo.dnrhosting.nl/Case...stacker108.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker109.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker112.jpg

Fase 1 is ready. When the watercooling is complete it is only fill up the watercooling.
Fase 2 coming soon after this weekend.

This part doesn’t fit anymore now. ;)

http://www.ediejo.dnrhosting.nl/Case...stacker110.jpg

Today picked up the last piece of hose. Friday the system has to go to NetGamez.

http://www.ediejo.dnrhosting.nl/Case...stacker113.jpg

This we use for the coolant.

Anti Alg
Demineralised water.
Dye Lite UV Reactive Green (2ml) OC-Shop.

http://www.ediejo.dnrhosting.nl/Case...stacker114.jpg

Flip the case on it's back and fill her up.

http://www.ediejo.dnrhosting.nl/Case...stacker115.jpg

Back on it's feet , from light to dark.

http://www.ediejo.dnrhosting.nl/Case...stacker116.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker117.jpg

And now whit sidepanel on.

http://www.ediejo.dnrhosting.nl/Case...stacker118.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker119.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker120.jpg


Now put ATX cable on it's place , and of too NetGamez
AfterNetGamez
We directly start working on fase 2.

1 week later the case is on the HWI days. Then it needs to be finished for the Coolermaster Contest Coolermaster. Because only till 30 oktober to sign in for that contest. ;)

Today started working on the stacker again. sawwed the plexi with a sawingmachine , much quicker then by hand.

http://www.ediejo.dnrhosting.nl/Case...stacker121.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker123.jpg

This with machines too.

http://www.ediejo.dnrhosting.nl/Case...stacker122.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker124.jpg

Hard to see , buth nice and straight.

http://www.ediejo.dnrhosting.nl/Case...stacker125.jpg

The piece of 5mm plexi is coming here.

http://www.ediejo.dnrhosting.nl/Case...stacker126.jpg

So we can hide the cables there.

http://www.ediejo.dnrhosting.nl/Case...stacker129.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker130.jpg

The piece of cardbord will be replaced with a piece of bleu iron.

http://www.ediejo.dnrhosting.nl/Case...stacker131.jpg

That other piece of plexi si going into the front.

http://www.ediejo.dnrhosting.nl/Case...stacker127.jpg

http://www.ediejo.dnrhosting.nl/Case...stacker128.jpg

And now it's standing there completely stripped:P
In only 15 minutes , so is easy to strip.

http://www.ediejo.dnrhosting.nl/Case...stacker132.jpg

Tomorrow more.

wow... i'm speachless O.O
How much have you spent (will be spent) on everything???

Quote:

---

Originally Posted by iSlash

wow... i'm speachless O.O
How much have you spent (will be spent) on everything???

---

Thats the nicest part of this mod.
It's low budget:)
Total cost when it's finished wil be around 1300 euro.
Thats including the hardware and watercoolingparts.

Sick!

Tubing looks a little cloudy, but the dark pictures with the leds on are so amazing. Loving the blue/green/UV color combination.