DFI LanParty UP ICFX3200-TR2/G - (Ati RD600 for Core 2 - is here)

Printable View

Show 100 post(s) from this thread on one page

09-19-2006, 11:34 AM
OBR

DFI LanParty UT ICFX3200-TR2/G - (Ati RD600 for Core 2 - is here)

Last ATI high-end chipset for Core 2 is close ... look at official spec ...

http://www.pctuning.cz/ilustrace3/fi...x3200-t2rg.pdf
09-19-2006, 11:40 AM
nn_step

Quote:

128-bit Dual-channel memory architecture
4 240-pin DDRII DIMM sockets 8GB in max.
1
Supports unbuffered, single/double-side DDRII-667/800 DI
Supports x8/x16, non-ECC and up to 1GB DDRII devices

umm how the :banana::banana::banana::banana: does it support 8Gb them? :confused:
09-19-2006, 11:42 AM
ettis

woho! Though, why only 2x8 pci-e16? Me want 2x16! :mad:
09-19-2006, 11:43 AM
OBR

Quote:

Originally Posted by ettis

woho! Though, why only 2x8 pci-e16? Me want 2x16! :mad:

this mobo have 3x PCIx16! i am sure it is mistake in sheet only ....:)
09-19-2006, 11:45 AM
ettis

Quote:

Originally Posted by OBR

this mobo have 3x PCIx16! man ....:)

Yeah, and the last one is only x2. I want at least 2x16 + 1xsomething or even better 3x16 lanes ^^
09-19-2006, 12:16 PM
Vassili

Quote:

Originally Posted by nn_step

umm how the does it support 8Gb them? :confused:

I think I has something to do with the PCI-E devices not with the memory. But I don't know why there should be a limitation on the memory used on a PCI-E device?:confused:

Anyone how saw this in the PDF:
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com

:lol2: :lol2:
09-19-2006, 01:48 PM
cantankerous

I hope this board/bios has some of the features I have come to love from my Ultra-D such as thermal throttling for the onboard 3 pin fan headers depending on temps which of course is user defined as well as the power on by set date/time. I have found this very usefull a few times when im not around and need my pc booted up itself for whatever reason.

I too am a little weary on the 2 x 8x pcie slots. I was hoping for 2 x 16x for the upmost in performance even if only by a margin when compared to 2 x 8x slots.
09-19-2006, 01:54 PM
3NZ0

Quote:

Originally Posted by ettis

Yeah, and the last one is only x2. I want at least 2x16 + 1xsomething or even better 3x16 lanes ^^

um...why?:stick:

dont need anything faster than whats been supplied.

2*8x slots is good enough for sli/xfire

and the 2x slot easily provides more than enough bandwidth for a physics card
09-19-2006, 02:38 PM
[XC] hipno650

Quote:

Originally Posted by 3NZ0

um...why?:stick:

dont need anything faster than whats been supplied.

2*8x slots is good enough for sli/xfire

and the 2x slot easily provides more than enough bandwidth for a physics card

and you know this how? the only disapointment is the 2x8 lanes and the 2x lane they should have aleast made it 4x. but if it can oc as well as the 965 we will have a real winner!!!!!:slobber:
09-19-2006, 02:39 PM
Knight

I was hoping for pictures of the board. I guess we just have to wait a little bit longer. :cool:
09-19-2006, 02:41 PM
ozzimark

Quote:

Originally Posted by hipno650

and you know this how? the only disapointment is the 2x8 lanes and the 2x lane they should have aleast made it 4x. but if it can oc as well as the 965 we will have a real winner!!!!!:slobber:

there are plenty of reviews showing that the difference is minimal, though i guess here at XS, every bit counts when trying to break records :D
09-19-2006, 02:42 PM
[XC] hipno650

Quote:

Originally Posted by ozzimark

there are plenty of reviews showing that the difference is minimal, though i guess here at XS, every bit counts when trying to break records :D

good to hear but this is xs:D and everyone want's the absolute best!!!!!!
09-19-2006, 02:55 PM
nn_step

Quote:

Originally Posted by Vassili

I think I has something to do with the PCI-E devices not with the memory. But I don't know why there should be a limitation on the memory used on a PCI-E device?:confused:

Anyone how saw this in the PDF:
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com

:lol2: :lol2:

I'm thinking fake
09-19-2006, 03:12 PM
Nephilim

Quote:

Originally Posted by nn_step

I'm thinking fake

I'm thinking the same. That document has a very low level of polish.

Things like the DFI banner simply having had the hue changed to make the features on the board blue and purple... when have DFI made a board that looks like that?

DFI could also put pictures of the product on marketing information. It just looks like someone has gone by the initial specs in the DFI roadmap and extrapolated some features and made some assumptions...

But we'll see
09-19-2006, 03:46 PM
dicecca112

that and this DDRII667 is PC6400 and DDRII800 is PC7100 um isn't it 5300 and 6400? Also at the bottom look at the pic, it says it uses the Karjan Module for sound but it clearly shows Sound Headers. They wouldn't be there.
09-19-2006, 03:53 PM
RyderOCZ

Quote:

Originally Posted by nn_step

umm how the :banana::banana::banana::banana: does it support 8Gb them? :confused:

Because there are 2GB sticks of DDR-II, so you only need 4 slots for 8GB.
09-19-2006, 04:07 PM
Fr3ak

Fake or not, I want that board asap, my P5W just died half an hour ago.
Hopefully it will be fine with Seasonic PSUs this time.
09-19-2006, 04:10 PM
Shift

Quote:

Originally Posted by RyderOCZ

Because there are 2GB sticks of DDR-II, so you only need 4 slots for 8GB.

I was getting confused on that same part. Where can you get a one 2gb stick?
09-19-2006, 04:12 PM
[XC] DragonOrta

Quote:

Originally Posted by RyderOCZ

Because there are 2GB sticks of DDR-II, so you only need 4 slots for 8GB.

But it says that is accepts modules up to 1gb, which wouldn't include 2gb sticks.
09-19-2006, 04:18 PM
RyderOCZ

Quote:

Originally Posted by DragonOrta

But it says that is accepts modules up to 1gb, which wouldn't include 2gb sticks.

Its not 1GB as in module size, its 1Gb (Gigabit...IC density)

Quote:

Originally Posted by Latoron

I was getting confused on that same part. Where can you get a one 2gb stick?

You can get it here: http://www.ocztechnology.com/product...s_dual_channel

As well as several other manufacturers: http://www.xtremesystems.org/forums/...d.php?t=115803
09-19-2006, 04:25 PM
[XC] DragonOrta

Quote:

Originally Posted by RyderOCZ

Its not 1GB as in module size, its 1Gb (Gigabit...IC density)

Oh, ok. Makes sense now.
09-19-2006, 05:24 PM
nn_step

Quote:

Originally Posted by RyderOCZ

Its not 1GB as in module size, its 1Gb (Gigabit...IC density)

SO you are basically saying that should 2Gb module sizes come out, it would not support them.. ok
09-19-2006, 05:33 PM
RyderOCZ

Quote:

Originally Posted by nn_step

SO you are basically saying that should 2Gb module sizes come out, it would not support them.. ok

Correct, it doesn't say it supports 2Gb IC Density, otherwise the max ram would be 16GB.
09-19-2006, 06:17 PM
Nedjo

RD580, and I guess same for RD600 supports 48 PCIe lanes. If SB600 is connested with 4 of them, it remains 44 for the PCIe slots it would make sense to have 2x16 for CrossFire, and 1x8 for PhysX, and 4 foru what ever reason (say additiona RAID controller). 2x8 for grapphics, and 1x2 for physix is just under high expectations!

http://img213.imageshack.us/img213/7...d600ob5.th.gif

So I'm with nn_step guessing this PDF is fake!
09-19-2006, 08:23 PM
b0bd0le

totally fake

seriously, zoom in at the io panel

it's like a drunk 4 year old did that in ms paint

Show 100 post(s) from this thread on one page