-
E6700@ASUS P5WDG2 WS PRO result
-
very nice.. rarely see ya using a case :D
-
is this the fsb limit?or you just stop cuz the cpu temp is too high?:)
great work as always man:toast:
Fabio:cool:
-
Quote:
Originally Posted by eva2000
very nice.. rarely see ya using a case :D
I pack it for someone.
-
hello!
what is the third coper cooler on the board for ? looks like someting new from P5WDH and P5B dlx between south and north bridge
thanks for your always ahead tests and infos ;)
-
Hmmm,
looks like the bridge for the PCI-X slots....
Greetz,
Remorfer
-
I use this board too and it ROCKS!!! :banana: :banana: :banana:
:woot:
But... just a short question... why you used for the RAM sockel A2 and B1 ?
Thanks...
-
Quote:
Originally Posted by herderien
hello!
what is the third coper cooler on the board for ? looks like someting new from P5WDH and P5B dlx between south and north bridge
thanks for your always ahead tests and infos ;)
the bridge for the PCI-X slots:D
-
Quote:
Originally Posted by commy
I use this board too and it ROCKS!!! :banana: :banana: :banana:
:woot:
But... just a short question... why you used for the RAM sockel A2 and B1 ?
Thanks...
a little trick:D
it's still dual channel
but it's could be better to OC;)
-
Quote:
Originally Posted by coolaler
the bridge for the PCI-X slots:D
Yeah, you can run Crossfire and some fast: Areca RAID controller. :banana:
-
Excellent..Drop a Kentsfield in that and you have the perfect machine.
Good post and excellent pics!:clap:
-
Quote:
Originally Posted by coolaler
a little trick:D
it's still dual channel
but it's could be better to OC;)
Hey, okay...sounds very good :clap:
Maybe you have some more informations why this could be? :fact:
-
wow i didnt know conroe could run at 88c!!!!!! there i was thinking 60c is to hot?????
-
88 DEGREES!!!! Thats like MELTING THE SOLDER HOT. Didn't Shamino rip 2 cores off @ 85 Degrees while trying to remove IHS's?!?
in-freakin-sane...
-
Dam what is too hot for these chips?
I am runnin scared @ 62
-
Coolaler:
what kind of CFM's does that rear 120 MM fan put out?....
the reason i am asking; is it sufficient to pull enough air over that monster heat sink?
-
did you happen to find the boardst max stable fsb?
do you really think AsusProbe was correct about the temps
i mean, did you touch the Heatsink?
@ T>70 you are not supposed to touch the heatpipes for over 2-3secs
T.I.A.
-
very nice!
which lian li is that? I think it's the one I'm going to buy soon since my antec superlanboy has started rattleing :/
-
Quote:
Originally Posted by coolaler
a little trick:D
it's still dual channel
but it's could be better to OC;)
That's a new one on me. Can you explain how that works?
-
Quote:
Originally Posted by menlatin
88 DEGREES!!!! Thats like MELTING THE SOLDER HOT. Didn't Shamino rip 2 cores off @ 85 Degrees while trying to remove IHS's?!?
in-freakin-sane...
good point. doesn't seem like it could really be 85 or it's a sink seating problem maybe? In any case, so far the board seems only on par with an average P5WDH.
Cooaler, can you try at 1.85Vmch at over 400fsb?
-
Quote:
Originally Posted by coolaler
a little trick:D
it's still dual channel
but it's could be better to OC;)
does this apply to the non-pro version as well?
-
If you look at the intel data sheet for the i975x mch controller oddly enough it says any bank can be populated in any order to run dual channel mode.
http://download.intel.com/design/chi...s/31015801.pdf
Section 9.2.2.1
I guess the best way to find out if it works on your board would be to try it.
-
wonder when it'll be available in the US?
-
This might be a silly questions..
But whats the pro/cons against Asus P5W-DH ???
-
That is very likely not the real temperature at all.
-k0nsl
Quote:
Originally Posted by menlatin
88 DEGREES!!!! Thats like MELTING THE SOLDER HOT. Didn't Shamino rip 2 cores off @ 85 Degrees while trying to remove IHS's?!?
in-freakin-sane...
